All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Yang Zhong" <yang.zhong@intel.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	Artyom Tarasenko <atar4qemu@gmail.com>,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-arm] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device
Date: Wed, 31 Jul 2019 09:56:49 +0200	[thread overview]
Message-ID: <20190731075652.17053-6-thuth@redhat.com> (raw)
In-Reply-To: <20190731075652.17053-1-thuth@redhat.com>

The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig        | 3 +++
 hw/core/Kconfig       | 3 +++
 hw/core/Makefile.objs | 2 +-
 hw/pci-host/Kconfig   | 3 ++-
 4 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ab65ecd216..849195c3f6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -292,6 +292,7 @@ config RASPI
 config STM32F205_SOC
     bool
     select ARM_V7M
+    select OR_IRQ
     select STM32F2XX_TIMER
     select STM32F2XX_USART
     select STM32F2XX_SYSCFG
@@ -360,6 +361,7 @@ config MPS2
     select LAN9118
     select MPS2_FPGAIO
     select MPS2_SCC
+    select OR_IRQ
     select PL022    # Serial port
     select PL080    # DMA controller
 
@@ -439,6 +441,7 @@ config ARMSSE
     select IOTKIT_SECCTL
     select IOTKIT_SYSCTL
     select IOTKIT_SYSINFO
+    select OR_IRQ
     select TZ_MPC
     select TZ_MSC
     select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index d11920fcb3..984143456a 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,9 @@ config PTIMER
 config FITLOADER
     bool
 
+config OR_IRQ
+    bool
+
 config PLATFORM_BUS
     bool
 
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index d6cfb2a81b..ce337bd7c9 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
 common-obj-$(CONFIG_FITLOADER) += loader-fit.o
 common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
 common-obj-$(CONFIG_REGISTER) += register.o
-common-obj-$(CONFIG_SOFTMMU) += or-irq.o
+common-obj-$(CONFIG_OR_IRQ) += or-irq.o
 common-obj-$(CONFIG_SOFTMMU) += split-irq.o
 common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
 common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8c16d96b3f..1edc1a31d4 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -2,8 +2,9 @@ config PAM
     bool
 
 config PREP_PCI
-    select PCI
     bool
+    select PCI
+    select OR_IRQ
 
 config GRACKLE_PCI
     select PCI
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Thomas Huth <thuth@redhat.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Yang Zhong" <yang.zhong@intel.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
	qemu-arm@nongnu.org,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	Artyom Tarasenko <atar4qemu@gmail.com>,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device
Date: Wed, 31 Jul 2019 09:56:49 +0200	[thread overview]
Message-ID: <20190731075652.17053-6-thuth@redhat.com> (raw)
In-Reply-To: <20190731075652.17053-1-thuth@redhat.com>

The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig        | 3 +++
 hw/core/Kconfig       | 3 +++
 hw/core/Makefile.objs | 2 +-
 hw/pci-host/Kconfig   | 3 ++-
 4 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ab65ecd216..849195c3f6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -292,6 +292,7 @@ config RASPI
 config STM32F205_SOC
     bool
     select ARM_V7M
+    select OR_IRQ
     select STM32F2XX_TIMER
     select STM32F2XX_USART
     select STM32F2XX_SYSCFG
@@ -360,6 +361,7 @@ config MPS2
     select LAN9118
     select MPS2_FPGAIO
     select MPS2_SCC
+    select OR_IRQ
     select PL022    # Serial port
     select PL080    # DMA controller
 
@@ -439,6 +441,7 @@ config ARMSSE
     select IOTKIT_SECCTL
     select IOTKIT_SYSCTL
     select IOTKIT_SYSINFO
+    select OR_IRQ
     select TZ_MPC
     select TZ_MSC
     select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index d11920fcb3..984143456a 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,9 @@ config PTIMER
 config FITLOADER
     bool
 
+config OR_IRQ
+    bool
+
 config PLATFORM_BUS
     bool
 
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index d6cfb2a81b..ce337bd7c9 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
 common-obj-$(CONFIG_FITLOADER) += loader-fit.o
 common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
 common-obj-$(CONFIG_REGISTER) += register.o
-common-obj-$(CONFIG_SOFTMMU) += or-irq.o
+common-obj-$(CONFIG_OR_IRQ) += or-irq.o
 common-obj-$(CONFIG_SOFTMMU) += split-irq.o
 common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
 common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8c16d96b3f..1edc1a31d4 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -2,8 +2,9 @@ config PAM
     bool
 
 config PREP_PCI
-    select PCI
     bool
+    select PCI
+    select OR_IRQ
 
 config GRACKLE_PCI
     select PCI
-- 
2.21.0



  parent reply	other threads:[~2019-07-31  7:57 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31  7:56 [Qemu-arm] [PATCH for-4.2 v2 0/8] Kconfig switches Thomas Huth
2019-07-31  7:56 ` [Qemu-devel] " Thomas Huth
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 4/8] hw/core: Add a config switch for the "register" device Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31 11:44   ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 11:44     ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31 12:33     ` [Qemu-arm] " Paolo Bonzini
2019-07-31 12:33       ` [Qemu-devel] " Paolo Bonzini
2019-08-05 17:04       ` Alistair Francis
2019-07-31  7:56 ` Thomas Huth [this message]
2019-07-31  7:56   ` [Qemu-devel] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device Thomas Huth
2019-07-31 15:50   ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 15:50     ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 6/8] hw/core: Add a config switch for the "split-irq" device Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31 15:53   ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 15:53     ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 7/8] hw/misc: Add a config switch for the "unimplemented" device Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31 11:47   ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 11:47     ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31 11:50     ` [Qemu-arm] " Thomas Huth
2019-07-31 11:50       ` [Qemu-devel] " Thomas Huth
2019-07-31 15:55       ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 15:55         ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31 15:59         ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 15:59           ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-08-01  8:08           ` [Qemu-arm] " Thomas Huth
2019-08-01  8:08             ` Thomas Huth
2019-07-31  7:56 ` [Qemu-arm] [PATCH v2 8/8] hw/core: Add a config switch for the generic loader device Thomas Huth
2019-07-31  7:56   ` [Qemu-devel] " Thomas Huth
2019-07-31 15:54   ` [Qemu-arm] " Philippe Mathieu-Daudé
2019-07-31 15:54     ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-07-31 12:34 ` [Qemu-devel] [PATCH for-4.2 v2 0/8] Kconfig switches Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190731075652.17053-6-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=atar4qemu@gmail.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=yang.zhong@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.