[PATCH AUTOSEL 4.4 01/17] netfilter: nfnetlink: avoid deadlock due to synchronous request_module

[PATCH AUTOSEL 4.4 01/17] netfilter: nfnetlink: avoid deadlock due to synchronous request_module

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 1b0890cd60829bd51455dc5ad689ed58c4408227 ]

Thomas and Juliana report a deadlock when running:

(rmmod nf_conntrack_netlink/xfrm_user)

  conntrack -e NEW -E &
  modprobe -v xfrm_user

They provided following analysis:

conntrack -e NEW -E
    netlink_bind()
        netlink_lock_table() -> increases "nl_table_users"
            nfnetlink_bind()
            # does not unlock the table as it's locked by netlink_bind()
                __request_module()
                    call_usermodehelper_exec()

This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind()
won't return until modprobe process is done.

"modprobe xfrm_user":
    xfrm_user_init()
        register_pernet_subsys()
            -> grab pernet_ops_rwsem
                ..
                netlink_table_grab()
                    calls schedule() as "nl_table_users" is non-zero

so modprobe is blocked because netlink_bind() increased
nl_table_users while also holding pernet_ops_rwsem.

"modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink:
    ctnetlink_init()
        register_pernet_subsys()
            -> blocks on "pernet_ops_rwsem" thanks to xfrm_user module

both modprobe processes wait on one another -- neither can make
progress.

Switch netlink_bind() to "nowait" modprobe -- this releases the netlink
table lock, which then allows both modprobe instances to complete.

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Reported-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 9adedba78eeac..044559c10e98e 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -495,7 +495,7 @@ static int nfnetlink_bind(struct net *net, int group)
 	ss = nfnetlink_get_subsys(type << 8);
 	rcu_read_unlock();
 	if (!ss)
-		request_module("nfnetlink-subsys-%d", type);
+		request_module_nowait("nfnetlink-subsys-%d", type);
 	return 0;
 }
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.4 03/17] mac80211: don't warn about CW params when not using them

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ]

ieee80211_set_wmm_default() normally sets up the initial CW min/max for
each queue, except that it skips doing this if the driver doesn't
support ->conf_tx. We still end up calling drv_conf_tx() in some cases
(e.g., ieee80211_reconfig()), which also still won't do anything
useful...except it complains here about the invalid CW parameters.

Let's just skip the WARN if we weren't going to do anything useful with
the parameters.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/driver-ops.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index c258f1041d330..df2e4e3112177 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -169,11 +169,16 @@ int drv_conf_tx(struct ieee80211_local *local,
 	if (!check_sdata_in_driver(sdata))
 		return -EIO;
 
-	if (WARN_ONCE(params->cw_min == 0 ||
-		      params->cw_min > params->cw_max,
-		      "%s: invalid CW_min/CW_max: %d/%d\n",
-		      sdata->name, params->cw_min, params->cw_max))
+	if (params->cw_min == 0 || params->cw_min > params->cw_max) {
+		/*
+		 * If we can't configure hardware anyway, don't warn. We may
+		 * never have initialized the CW parameters.
+		 */
+		WARN_ONCE(local->ops->conf_tx,
+			  "%s: invalid CW_min/CW_max: %d/%d\n",
+			  sdata->name, params->cw_min, params->cw_max);
 		return -EINVAL;
+	}
 
 	trace_drv_conf_tx(local, sdata, ac, params);
 	if (local->ops->conf_tx)
-- 
2.20.1

[PATCH AUTOSEL 4.4 04/17] hwmon: (nct6775) Fix register address and added missed tolerance for nct6106

[Sasha Levin]

From: Björn Gerhart <gerhart@posteo.de>

[ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ]

Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.

Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/nct6775.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index d3c6115f16b90..db38dff3f9867 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -696,7 +696,7 @@ static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a };
-static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x17c };
+static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b };
 static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c };
 static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d };
 
@@ -3478,6 +3478,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME;
 		data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME;
 		data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME;
+		data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6106_REG_PWM;
 		data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT;
 		data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT;
-- 
2.20.1

[PATCH AUTOSEL 4.4 07/17] cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ]

The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.

Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pasemi-cpufreq.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 58c933f483004..991b6a3062c4f 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -145,10 +145,18 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	int err = -ENODEV;
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
+	if (!cpu)
+		goto out;
 
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
 	of_node_put(cpu);
-	if (!cpu)
+	if (!max_freqp) {
+		err = -EINVAL;
 		goto out;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
 
 	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
 	if (!dn)
@@ -185,16 +193,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-	if (!max_freqp) {
-		err = -EINVAL;
-		goto out_unmap_sdcpwr;
-	}
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
 	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
 	pr_debug("initializing frequency table\n");
 
@@ -212,9 +210,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
 
-out_unmap_sdcpwr:
-	iounmap(sdcpwr_mapbase);
-
 out_unmap_sdcasr:
 	iounmap(sdcasr_mapbase);
 out:
-- 
2.20.1

[PATCH AUTOSEL 4.4 07/17] cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ]

The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.

Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pasemi-cpufreq.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 58c933f483004..991b6a3062c4f 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -145,10 +145,18 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	int err = -ENODEV;
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
+	if (!cpu)
+		goto out;
 
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
 	of_node_put(cpu);
-	if (!cpu)
+	if (!max_freqp) {
+		err = -EINVAL;
 		goto out;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
 
 	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
 	if (!dn)
@@ -185,16 +193,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-	if (!max_freqp) {
-		err = -EINVAL;
-		goto out_unmap_sdcpwr;
-	}
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
 	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
 	pr_debug("initializing frequency table\n");
 
@@ -212,9 +210,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
 
-out_unmap_sdcpwr:
-	iounmap(sdcpwr_mapbase);
-
 out_unmap_sdcasr:
 	iounmap(sdcasr_mapbase);
 out:
-- 
2.20.1

[PATCH AUTOSEL 4.4 08/17] s390/qdio: add sanity checks to the fast-requeue path

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit a6ec414a4dd529eeac5c3ea51c661daba3397108 ]

If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.

Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/qdio_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d64b401f3d058..51cdccaec1648 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1575,13 +1575,13 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
 		rc = qdio_kick_outbound_q(q, phys_aob);
 	} else if (need_siga_sync(q)) {
 		rc = qdio_siga_sync_q(q);
+	} else if (count < QDIO_MAX_BUFFERS_PER_Q &&
+		   get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 &&
+		   state == SLSB_CU_OUTPUT_PRIMED) {
+		/* The previous buffer is not processed yet, tack on. */
+		qperf_inc(q, fast_requeue);
 	} else {
-		/* try to fast requeue buffers */
-		get_buf_state(q, prev_buf(bufnr), &state, 0);
-		if (state != SLSB_CU_OUTPUT_PRIMED)
-			rc = qdio_kick_outbound_q(q, 0);
-		else
-			qperf_inc(q, fast_requeue);
+		rc = qdio_kick_outbound_q(q, 0);
 	}
 
 	/* in case of SIGA errors we must process the error immediately */
-- 
2.20.1

[PATCH AUTOSEL 4.4 14/17] scsi: megaraid_sas: fix panic on loading firmware crashdump

[Sasha Levin]

From: Junxiao Bi <junxiao.bi@oracle.com>

[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]

While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 2422094f1f15c..5e0bac8de6381 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2752,6 +2752,7 @@ megasas_fw_crash_buffer_show(struct device *cdev,
 	u32 size;
 	unsigned long buff_addr;
 	unsigned long dmachunk = CRASH_DMA_BUF_SIZE;
+	unsigned long chunk_left_bytes;
 	unsigned long src_addr;
 	unsigned long flags;
 	u32 buff_offset;
@@ -2777,6 +2778,8 @@ megasas_fw_crash_buffer_show(struct device *cdev,
 	}
 
 	size = (instance->fw_crash_buffer_size * dmachunk) - buff_offset;
+	chunk_left_bytes = dmachunk - (buff_offset % dmachunk);
+	size = (size > chunk_left_bytes) ? chunk_left_bytes : size;
 	size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
 
 	src_addr = (unsigned long)instance->crash_buf[buff_offset / dmachunk] +
-- 
2.20.1

[PATCH AUTOSEL 4.4 15/17] scsi: ibmvfc: fix WARN_ON during event pool release

[Sasha Levin]

From: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 1f9f9e5af2072..0526a47e30a3f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4869,8 +4869,8 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	ibmvfc_purge_requests(vhost, DID_ERROR);
-	ibmvfc_free_event_pool(vhost);
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	ibmvfc_free_event_pool(vhost);
 
 	ibmvfc_free_mem(vhost);
 	spin_lock(&ibmvfc_driver_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.4 15/17] scsi: ibmvfc: fix WARN_ON during event pool release

[Sasha Levin]

From: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 1f9f9e5af2072..0526a47e30a3f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4869,8 +4869,8 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	ibmvfc_purge_requests(vhost, DID_ERROR);
-	ibmvfc_free_event_pool(vhost);
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	ibmvfc_free_event_pool(vhost);
 
 	ibmvfc_free_mem(vhost);
 	spin_lock(&ibmvfc_driver_lock);
-- 
2.20.1