From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations
Date: Wed, 14 Aug 2019 08:08:42 +0200 [thread overview]
Message-ID: <20190814060854.26345-4-codekipper@gmail.com> (raw)
In-Reply-To: <20190814060854.26345-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
sound/soc/sunxi/sun4i-i2s.c | 73 +++++++++++++++++++++++++------------
1 file changed, 49 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 7c37b6291df0..34f31439ae7b 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -127,8 +127,6 @@ struct sun4i_i2s;
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
@@ -150,8 +148,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
/* Register fields for i2s */
struct reg_field field_clkdiv_mclk_en;
@@ -212,7 +208,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +238,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +261,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +336,36 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -994,8 +1021,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
.has_chsel_tx_chen = true,
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
linux-sunxi@googlegroups.com
Cc: alsa-devel@alsa-project.org, Marcus Cooper <codekipper@gmail.com>,
lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
be17068@iperbole.bo.it, broonie@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations
Date: Wed, 14 Aug 2019 08:08:42 +0200 [thread overview]
Message-ID: <20190814060854.26345-4-codekipper@gmail.com> (raw)
In-Reply-To: <20190814060854.26345-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 73 +++++++++++++++++++++++++------------
1 file changed, 49 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 7c37b6291df0..34f31439ae7b 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -127,8 +127,6 @@ struct sun4i_i2s;
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
@@ -150,8 +148,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
/* Register fields for i2s */
struct reg_field field_clkdiv_mclk_en;
@@ -212,7 +208,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +238,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +261,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +336,36 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -994,8 +1021,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
.has_chsel_tx_chen = true,
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
linux-sunxi@googlegroups.com
Cc: linux-arm-kernel@lists.infradead.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations
Date: Wed, 14 Aug 2019 08:08:42 +0200 [thread overview]
Message-ID: <20190814060854.26345-4-codekipper@gmail.com> (raw)
In-Reply-To: <20190814060854.26345-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 73 +++++++++++++++++++++++++------------
1 file changed, 49 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 7c37b6291df0..34f31439ae7b 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -127,8 +127,6 @@ struct sun4i_i2s;
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
@@ -150,8 +148,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
/* Register fields for i2s */
struct reg_field field_clkdiv_mclk_en;
@@ -212,7 +208,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +238,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +261,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +336,36 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -994,8 +1021,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
.has_chsel_tx_chen = true,
--
2.22.0
next prev parent reply other threads:[~2019-08-14 6:08 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-14 6:08 [PATCH v5 00/15] ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 6:08 ` [PATCH v5 01/15] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:43 ` Maxime Ripard
2019-08-14 6:43 ` Maxime Ripard
2019-08-14 11:24 ` Code Kipper
2019-08-14 11:24 ` Code Kipper
2019-08-14 11:24 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 02/15] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-3-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:09 ` Maxime Ripard
2019-08-14 7:09 ` Maxime Ripard
2019-08-14 7:09 ` Maxime Ripard
2019-08-16 6:27 ` Code Kipper
2019-08-16 6:27 ` Code Kipper
2019-08-16 6:27 ` Code Kipper
2019-08-14 9:30 ` Mark Brown
2019-08-14 9:30 ` Mark Brown
2019-08-14 9:30 ` Mark Brown
[not found] ` <20190814093011.GD4640-7j8lgAiuQgnQXOPxS62xeg@public.gmane.org>
2019-08-16 6:22 ` Code Kipper
2019-08-16 6:22 ` Code Kipper
2019-08-16 6:22 ` Code Kipper
2019-08-14 6:08 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2019-08-14 6:08 ` [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-4-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:13 ` Maxime Ripard
2019-08-14 7:13 ` Maxime Ripard
2019-08-14 7:13 ` Maxime Ripard
2019-08-14 9:31 ` Mark Brown
2019-08-14 9:31 ` Mark Brown
2019-08-14 9:31 ` Mark Brown
2019-08-14 6:08 ` [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-5-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:16 ` Maxime Ripard
2019-08-14 7:16 ` Maxime Ripard
2019-08-14 7:16 ` Maxime Ripard
2019-08-14 11:23 ` Code Kipper
2019-08-14 11:23 ` Code Kipper
2019-08-14 11:23 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 05/15] ASoC: sun4i-i2s: Add functions for RX and TX channel offsets codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 06/15] ASoC: sun4i-i2s: Add functions for RX and TX channel enables codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 07/15] ASoC: sun4i-i2s: Add functions for RX and TX channel selects codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 08/15] ASoC: sun4i-i2s: Add functions for channel mapping codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 09/15] clk: sunxi-ng: h6: Allow I2S to change parent rate codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-10-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-21 4:07 ` Chen-Yu Tsai
2019-08-21 4:07 ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21 4:07 ` Chen-Yu Tsai
[not found] ` <CAGb2v65+-OB4zEyW8f7hcWHkL7DtfEB1YK2B1nOKdgNdNqC0kQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-08-21 5:52 ` Code Kipper
2019-08-21 5:52 ` [linux-sunxi] " Code Kipper
2019-08-21 5:52 ` Code Kipper
[not found] ` <CAEKpxBnxf=iejk887A7qFkzt3BXVxiRS1PeA45aZYR9DsBAU4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-08-21 6:01 ` Chen-Yu Tsai
2019-08-21 6:01 ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21 6:01 ` Chen-Yu Tsai
2019-08-21 9:19 ` Code Kipper
2019-08-21 9:19 ` Code Kipper
2019-08-21 9:19 ` Code Kipper
[not found] ` <CAEKpxB=9NNoZgZoY_GpcEuDYoMUGzb+ATgZOSM64qy9tirC_MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-08-21 9:35 ` Chen-Yu Tsai
2019-08-21 9:35 ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21 9:35 ` Chen-Yu Tsai
2019-08-14 6:08 ` [PATCH v5 10/15] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 11/15] ASoC: sun4i-i2s: Add support for H6 I2S codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-12-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:57 ` Jernej Škrabec
2019-08-14 7:57 ` Jernej Škrabec
2019-08-14 7:57 ` Jernej Škrabec
2019-08-14 11:08 ` Code Kipper
2019-08-14 11:08 ` Code Kipper
2019-08-14 11:08 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 12/15] ASoC: sun4i-i2s: Add multi-lane functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-13-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 11:16 ` Code Kipper
2019-08-14 11:16 ` Code Kipper
2019-08-14 11:16 ` Code Kipper
2019-08-14 8:27 ` Jernej Škrabec
2019-08-14 8:27 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 8:27 ` Jernej Škrabec
2019-08-14 6:08 ` [PATCH v5 13/15] ASoC: sun4i-i2s: Add multichannel functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` [PATCH v5 14/15] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-15-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 8:28 ` Jernej Škrabec
2019-08-14 8:28 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 8:28 ` Jernej Škrabec
2019-08-14 9:03 ` Code Kipper
2019-08-14 9:03 ` [linux-sunxi] " Code Kipper
2019-08-14 9:03 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 15/15] ASoC: sun4i-i2s: Adjust regmap settings codekipper-Re5JQEeQqe8AvxtiuMwx3w
2019-08-14 6:08 ` codekipper
2019-08-14 6:08 ` codekipper
[not found] ` <20190814060854.26345-16-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 11:31 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 11:31 ` Jernej Škrabec
2019-08-14 8:37 ` Jernej Škrabec
2019-08-14 8:37 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 8:37 ` Jernej Škrabec
2019-08-14 9:02 ` Code Kipper
2019-08-14 9:02 ` [linux-sunxi] " Code Kipper
2019-08-14 9:02 ` Code Kipper
2019-08-14 11:31 ` Chen-Yu Tsai
2019-08-14 11:31 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814060854.26345-4-codekipper@gmail.com \
--to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.