From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Auger Eric <eric.auger@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Alex Williamson <alex.williamson@redhat.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types
Date: Wed, 14 Aug 2019 13:17:26 -0700 [thread overview]
Message-ID: <20190814131726.06e7423c@jacob-builder> (raw)
In-Reply-To: <9d678164-219c-80f9-c1be-121c097c691a@redhat.com>
On Thu, 18 Jul 2019 10:35:37 +0200
Auger Eric <eric.auger@redhat.com> wrote:
> Hi Jacob,
>
> On 6/9/19 3:44 PM, Jacob Pan wrote:
> > When Shared Virtual Memory is exposed to a guest via vIOMMU,
> > scalable IOTLB invalidation may be passed down from outside IOMMU
> > subsystems. This patch adds invalidation functions that can be used
> > for additional translation cache types.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> > drivers/iommu/dmar.c | 50
> > +++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/intel-iommu.h | 21 +++++++++++++++---- 2 files
> > changed, 67 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> > index 6d969a1..0cda6fb 100644
> > --- a/drivers/iommu/dmar.c
> > +++ b/drivers/iommu/dmar.c
> > @@ -1357,6 +1357,21 @@ void qi_flush_iotlb(struct intel_iommu
> > *iommu, u16 did, u64 addr, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based IOTLB Invalidate */
> > +void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u64 addr,
> > u32 pasid,
> > + unsigned int size_order, u64 granu, int ih)
> > +{
> > + struct qi_desc desc;
> nit: you could also init to {};
> > +
> > + desc.qw0 = QI_EIOTLB_PASID(pasid) | QI_EIOTLB_DID(did) |
> > + QI_EIOTLB_GRAN(granu) | QI_EIOTLB_TYPE;
> > + desc.qw1 = QI_EIOTLB_ADDR(addr) | QI_EIOTLB_IH(ih) |
> > + QI_EIOTLB_AM(size_order);
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid, u16 qdep, u64 addr, unsigned mask)
> > {
> > @@ -1380,6 +1395,41 @@ void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based device IOTLB Invalidate */
> > +void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned size, u64
> > granu)
> s/size/size_order
> > +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) |
> > QI_DEV_EIOTLB_SID(sid) |
> > + QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE |
> > + QI_DEV_IOTLB_PFSID(pfsid);
> maybe add a comment to remind MIP hint is sent to 0 as of now.
> > + desc.qw1 = QI_DEV_EIOTLB_GLOB(granu);
> > +
> > + /* If S bit is 0, we only flush a single page. If S bit is
> > set,
> > + * The least significant zero bit indicates the size. VT-d
> > spec
> > + * 6.5.2.6
> > + */
> > + if (!size)
> > + desc.qw0 |= QI_DEV_EIOTLB_ADDR(addr) &
> > ~QI_DEV_EIOTLB_SIZE;
> this is qw1.
my mistake.
> > + else {
> > + unsigned long mask = 1UL << (VTD_PAGE_SHIFT +
> > size);
> don't you miss a "- 1 " here?
your are right
> > +
> > + desc.qw1 |= QI_DEV_EIOTLB_ADDR(addr & ~mask) |
> > QI_DEV_EIOTLB_SIZE;
> desc.qw1 |= addr & ~mask | QI_DEV_EIOTLB_SIZE;
> ie. I don't think QI_DEV_EIOTLB_ADDR is useful here?
>
>
> So won't the following lines do the job?
>
> unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size) -1;
> desc.qw1 |= addr & ~mask;
> if (size)
> desc.qw1 |= QI_DEV_EIOTLB_SIZE
that would work too, and simpler. thanks for the suggestion. will
change.
> > + }
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > +void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64
> > granu, int pasid) +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_PC_TYPE | QI_PC_DID(did) | QI_PC_GRAN(granu)
> > | QI_PC_PASID(pasid);
> nit: reorder the fields according to the spec, easier to check if any
> is missing.
sounds good.
> > + desc.qw1 = 0;
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > /*
> > * Disable Queued Invalidation interface.
> > */
> > diff --git a/include/linux/intel-iommu.h
> > b/include/linux/intel-iommu.h index 94d3a9a..1cdb35b 100644
> > --- a/include/linux/intel-iommu.h
> > +++ b/include/linux/intel-iommu.h
> > @@ -339,7 +339,7 @@ enum {
> > #define QI_IOTLB_GRAN(gran) (((u64)gran) >>
> > (DMA_TLB_FLUSH_GRANU_OFFSET-4)) #define QI_IOTLB_ADDR(addr)
> > (((u64)addr) & VTD_PAGE_MASK) #define
> > QI_IOTLB_IH(ih) (((u64)ih) << 6) -#define
> > QI_IOTLB_AM(am) (((u8)am)) +#define
> > QI_IOTLB_AM(am) (((u8)am) & 0x3f)
> > #define QI_CC_FM(fm) (((u64)fm) << 48)
> > #define QI_CC_SID(sid) (((u64)sid) << 32)
> > @@ -357,17 +357,22 @@ enum {
> > #define QI_PC_DID(did) (((u64)did) << 16)
> > #define QI_PC_GRAN(gran) (((u64)gran) << 4)
> >
> > -#define QI_PC_ALL_PASIDS (QI_PC_TYPE | QI_PC_GRAN(0))
> > -#define QI_PC_PASID_SEL (QI_PC_TYPE | QI_PC_GRAN(1))
> > +/* PASID cache invalidation granu */
> > +#define QI_PC_ALL_PASIDS 0
> > +#define QI_PC_PASID_SEL 1
> >
> > #define QI_EIOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
> > #define QI_EIOTLB_GL(gl) (((u64)gl) << 7)
> > #define QI_EIOTLB_IH(ih) (((u64)ih) << 6)
> > -#define QI_EIOTLB_AM(am) (((u64)am))
> > +#define QI_EIOTLB_AM(am) (((u64)am) & 0x3f)
> > #define QI_EIOTLB_PASID(pasid) (((u64)pasid) << 32)
> > #define QI_EIOTLB_DID(did) (((u64)did) << 16)
> > #define QI_EIOTLB_GRAN(gran) (((u64)gran) << 4)
> >
> > +/* QI Dev-IOTLB inv granu */
> > +#define QI_DEV_IOTLB_GRAN_ALL 1
> > +#define QI_DEV_IOTLB_GRAN_PASID_SEL 0
> > +
> > #define QI_DEV_EIOTLB_ADDR(a) ((u64)(a) & VTD_PAGE_MASK)
> > #define QI_DEV_EIOTLB_SIZE (((u64)1) << 11)
> > #define QI_DEV_EIOTLB_GLOB(g) ((u64)g)
> > @@ -658,8 +663,16 @@ extern void qi_flush_context(struct
> > intel_iommu *iommu, u16 did, u16 sid, u8 fm, u64 type);
> > extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64
> > addr, unsigned int size_order, u64 type);
> > +extern void qi_flush_piotlb(struct intel_iommu *iommu, u16 did,
> > u64 addr,
> > + u32 pasid, unsigned int size_order, u64
> > type, int ih); extern void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, u16 qdep, u64 addr, unsigned mask);
> > +
> > +extern void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16
> > sid, u16 pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned
> > size, u64 granu);
> s/size/size_order
> > +
> > +extern void qi_flush_pasid_cache(struct intel_iommu *iommu, u16
> > did, u64 granu, int pasid); +
> > extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu
> > *iommu);
> > extern int dmar_ir_support(void);
> >
>
> Thanks
>
> Eric
[Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
WARNING: multiple messages have this Message-ID (diff)
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Auger Eric <eric.auger@redhat.com>
Cc: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
Yi Liu <yi.l.liu@intel.com>, "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Christoph Hellwig <hch@infradead.org>,
Lu Baolu <baolu.lu@linux.intel.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
jacob.jun.pan@linux.intel.com
Subject: Re: [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types
Date: Wed, 14 Aug 2019 13:17:26 -0700 [thread overview]
Message-ID: <20190814131726.06e7423c@jacob-builder> (raw)
In-Reply-To: <9d678164-219c-80f9-c1be-121c097c691a@redhat.com>
On Thu, 18 Jul 2019 10:35:37 +0200
Auger Eric <eric.auger@redhat.com> wrote:
> Hi Jacob,
>
> On 6/9/19 3:44 PM, Jacob Pan wrote:
> > When Shared Virtual Memory is exposed to a guest via vIOMMU,
> > scalable IOTLB invalidation may be passed down from outside IOMMU
> > subsystems. This patch adds invalidation functions that can be used
> > for additional translation cache types.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> > drivers/iommu/dmar.c | 50
> > +++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/intel-iommu.h | 21 +++++++++++++++---- 2 files
> > changed, 67 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> > index 6d969a1..0cda6fb 100644
> > --- a/drivers/iommu/dmar.c
> > +++ b/drivers/iommu/dmar.c
> > @@ -1357,6 +1357,21 @@ void qi_flush_iotlb(struct intel_iommu
> > *iommu, u16 did, u64 addr, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based IOTLB Invalidate */
> > +void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u64 addr,
> > u32 pasid,
> > + unsigned int size_order, u64 granu, int ih)
> > +{
> > + struct qi_desc desc;
> nit: you could also init to {};
> > +
> > + desc.qw0 = QI_EIOTLB_PASID(pasid) | QI_EIOTLB_DID(did) |
> > + QI_EIOTLB_GRAN(granu) | QI_EIOTLB_TYPE;
> > + desc.qw1 = QI_EIOTLB_ADDR(addr) | QI_EIOTLB_IH(ih) |
> > + QI_EIOTLB_AM(size_order);
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid, u16 qdep, u64 addr, unsigned mask)
> > {
> > @@ -1380,6 +1395,41 @@ void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based device IOTLB Invalidate */
> > +void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned size, u64
> > granu)
> s/size/size_order
> > +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) |
> > QI_DEV_EIOTLB_SID(sid) |
> > + QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE |
> > + QI_DEV_IOTLB_PFSID(pfsid);
> maybe add a comment to remind MIP hint is sent to 0 as of now.
> > + desc.qw1 = QI_DEV_EIOTLB_GLOB(granu);
> > +
> > + /* If S bit is 0, we only flush a single page. If S bit is
> > set,
> > + * The least significant zero bit indicates the size. VT-d
> > spec
> > + * 6.5.2.6
> > + */
> > + if (!size)
> > + desc.qw0 |= QI_DEV_EIOTLB_ADDR(addr) &
> > ~QI_DEV_EIOTLB_SIZE;
> this is qw1.
my mistake.
> > + else {
> > + unsigned long mask = 1UL << (VTD_PAGE_SHIFT +
> > size);
> don't you miss a "- 1 " here?
your are right
> > +
> > + desc.qw1 |= QI_DEV_EIOTLB_ADDR(addr & ~mask) |
> > QI_DEV_EIOTLB_SIZE;
> desc.qw1 |= addr & ~mask | QI_DEV_EIOTLB_SIZE;
> ie. I don't think QI_DEV_EIOTLB_ADDR is useful here?
>
>
> So won't the following lines do the job?
>
> unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size) -1;
> desc.qw1 |= addr & ~mask;
> if (size)
> desc.qw1 |= QI_DEV_EIOTLB_SIZE
that would work too, and simpler. thanks for the suggestion. will
change.
> > + }
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > +void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64
> > granu, int pasid) +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_PC_TYPE | QI_PC_DID(did) | QI_PC_GRAN(granu)
> > | QI_PC_PASID(pasid);
> nit: reorder the fields according to the spec, easier to check if any
> is missing.
sounds good.
> > + desc.qw1 = 0;
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > /*
> > * Disable Queued Invalidation interface.
> > */
> > diff --git a/include/linux/intel-iommu.h
> > b/include/linux/intel-iommu.h index 94d3a9a..1cdb35b 100644
> > --- a/include/linux/intel-iommu.h
> > +++ b/include/linux/intel-iommu.h
> > @@ -339,7 +339,7 @@ enum {
> > #define QI_IOTLB_GRAN(gran) (((u64)gran) >>
> > (DMA_TLB_FLUSH_GRANU_OFFSET-4)) #define QI_IOTLB_ADDR(addr)
> > (((u64)addr) & VTD_PAGE_MASK) #define
> > QI_IOTLB_IH(ih) (((u64)ih) << 6) -#define
> > QI_IOTLB_AM(am) (((u8)am)) +#define
> > QI_IOTLB_AM(am) (((u8)am) & 0x3f)
> > #define QI_CC_FM(fm) (((u64)fm) << 48)
> > #define QI_CC_SID(sid) (((u64)sid) << 32)
> > @@ -357,17 +357,22 @@ enum {
> > #define QI_PC_DID(did) (((u64)did) << 16)
> > #define QI_PC_GRAN(gran) (((u64)gran) << 4)
> >
> > -#define QI_PC_ALL_PASIDS (QI_PC_TYPE | QI_PC_GRAN(0))
> > -#define QI_PC_PASID_SEL (QI_PC_TYPE | QI_PC_GRAN(1))
> > +/* PASID cache invalidation granu */
> > +#define QI_PC_ALL_PASIDS 0
> > +#define QI_PC_PASID_SEL 1
> >
> > #define QI_EIOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
> > #define QI_EIOTLB_GL(gl) (((u64)gl) << 7)
> > #define QI_EIOTLB_IH(ih) (((u64)ih) << 6)
> > -#define QI_EIOTLB_AM(am) (((u64)am))
> > +#define QI_EIOTLB_AM(am) (((u64)am) & 0x3f)
> > #define QI_EIOTLB_PASID(pasid) (((u64)pasid) << 32)
> > #define QI_EIOTLB_DID(did) (((u64)did) << 16)
> > #define QI_EIOTLB_GRAN(gran) (((u64)gran) << 4)
> >
> > +/* QI Dev-IOTLB inv granu */
> > +#define QI_DEV_IOTLB_GRAN_ALL 1
> > +#define QI_DEV_IOTLB_GRAN_PASID_SEL 0
> > +
> > #define QI_DEV_EIOTLB_ADDR(a) ((u64)(a) & VTD_PAGE_MASK)
> > #define QI_DEV_EIOTLB_SIZE (((u64)1) << 11)
> > #define QI_DEV_EIOTLB_GLOB(g) ((u64)g)
> > @@ -658,8 +663,16 @@ extern void qi_flush_context(struct
> > intel_iommu *iommu, u16 did, u16 sid, u8 fm, u64 type);
> > extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64
> > addr, unsigned int size_order, u64 type);
> > +extern void qi_flush_piotlb(struct intel_iommu *iommu, u16 did,
> > u64 addr,
> > + u32 pasid, unsigned int size_order, u64
> > type, int ih); extern void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, u16 qdep, u64 addr, unsigned mask);
> > +
> > +extern void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16
> > sid, u16 pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned
> > size, u64 granu);
> s/size/size_order
> > +
> > +extern void qi_flush_pasid_cache(struct intel_iommu *iommu, u16
> > did, u64 granu, int pasid); +
> > extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu
> > *iommu);
> > extern int dmar_ir_support(void);
> >
>
> Thanks
>
> Eric
[Jacob Pan]
next prev parent reply other threads:[~2019-08-14 20:13 UTC|newest]
Thread overview: 128+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:42 ` Jonathan Cameron
2019-06-18 15:42 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:44 ` Jonathan Cameron
2019-06-18 15:44 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-18 15:41 ` Jonathan Cameron
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 14:10 ` Jonathan Cameron
2019-06-18 14:10 ` Jonathan Cameron
2019-06-24 22:28 ` Jacob Pan
2019-06-24 22:28 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-24 22:24 ` Jacob Pan
2019-06-24 22:24 ` Jacob Pan
2019-07-16 16:44 ` Auger Eric
2019-07-16 16:44 ` Auger Eric
2019-08-05 21:02 ` Jacob Pan
2019-08-05 21:02 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 16:50 ` Jonathan Cameron
2019-06-18 16:50 ` Jonathan Cameron
2019-06-25 18:55 ` Jacob Pan
2019-06-25 18:55 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-07-16 9:29 ` Auger Eric
2019-07-16 9:29 ` Auger Eric
2019-08-13 16:57 ` Jacob Pan
2019-08-13 16:57 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-07-16 9:30 ` Auger Eric
2019-07-16 9:30 ` Auger Eric
2019-08-05 20:02 ` Jacob Pan
2019-08-05 20:02 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 15:57 ` Jonathan Cameron
2019-06-18 15:57 ` Jonathan Cameron
2019-06-24 21:36 ` Jacob Pan
2019-06-24 21:36 ` Jacob Pan
2019-06-27 1:53 ` Lu Baolu
2019-06-27 1:53 ` Lu Baolu
2019-06-27 15:40 ` Jacob Pan
2019-06-27 15:40 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-07-16 9:33 ` Auger Eric
2019-07-16 9:33 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 16:03 ` Jonathan Cameron
2019-06-18 16:03 ` Jonathan Cameron
2019-06-24 23:44 ` Jacob Pan
2019-06-24 23:44 ` Jacob Pan
2019-07-16 9:52 ` Auger Eric
2019-07-16 9:52 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 16:42 ` Jonathan Cameron
2019-06-18 16:42 ` Jonathan Cameron
2019-06-24 23:59 ` Jacob Pan
2019-06-24 23:59 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-06-18 16:44 ` Jonathan Cameron
2019-06-18 16:44 ` Jonathan Cameron
2019-06-24 22:41 ` Jacob Pan
2019-06-24 22:41 ` Jacob Pan
2019-06-27 2:50 ` Lu Baolu
2019-06-27 2:50 ` Lu Baolu
2019-06-27 20:22 ` Jacob Pan
2019-06-27 20:22 ` Jacob Pan
2019-07-05 2:21 ` Lu Baolu
2019-07-05 2:21 ` Lu Baolu
2019-08-14 17:20 ` Jacob Pan
2019-08-14 17:20 ` Jacob Pan
2019-07-16 16:45 ` Auger Eric
2019-07-16 16:45 ` Auger Eric
2019-07-16 17:04 ` Raj, Ashok
2019-07-16 17:04 ` Raj, Ashok
2019-07-18 7:47 ` Auger Eric
2019-07-18 7:47 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-06-09 13:44 ` Jacob Pan
2019-07-18 8:35 ` Auger Eric
2019-07-18 8:35 ` Auger Eric
2019-08-14 20:17 ` Jacob Pan [this message]
2019-08-14 20:17 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-06-09 13:44 ` Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814131726.06e7423c@jacob-builder \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.