All of lore.kernel.org
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <mripard@kernel.org>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
	wens@csie.org, robh+dt@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Fri, 16 Aug 2019 11:35:13 +0200	[thread overview]
Message-ID: <20190816093513.GA25042@Red> (raw)
In-Reply-To: <20190814133322.dawzv3ityakxtqs4@flea>

On Wed, Aug 14, 2019 at 03:33:22PM +0200, Maxime Ripard wrote:
> On Wed, Aug 14, 2019 at 03:17:41PM +0200, Corentin Labbe wrote:
> > On Mon, Aug 12, 2019 at 11:40:00AM +0200, Maxime Ripard wrote:
> > > On Thu, Aug 08, 2019 at 10:42:53AM +0200, Corentin Labbe wrote:
> > > > This patch adds the evaluation variant of the model A of the PineH64.
> > > > The model A has the same size of the pine64 and has a PCIE slot.
> > > >
> > > > The only devicetree difference with current pineH64, is the PHY
> > > > regulator.
> > > >
> > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > ---
> > > >  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
> > > >  .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
> > > >  2 files changed, 27 insertions(+)
> > > >  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > >
> > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> > > > index f6db0611cb85..9a02166cbf72 100644
> > > > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > > > @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > new file mode 100644
> > > > index 000000000000..d8ff02747efe
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > @@ -0,0 +1,26 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > > > +/*
> > > > + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > + */
> > > > +
> > > > +#include "sun50i-h6-pine-h64.dts"
> > > > +
> > > > +/ {
> > > > +	model = "Pine H64 model A evaluation board";
> > > > +	compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
> > > > +
> > > > +	reg_gmac_3v3: gmac-3v3 {
> > > > +		compatible = "regulator-fixed";
> > > > +		regulator-name = "vcc-gmac-3v3";
> > > > +		regulator-min-microvolt = <3300000>;
> > > > +		regulator-max-microvolt = <3300000>;
> > > > +		startup-delay-us = <100000>;
> > > > +		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> > > > +		enable-active-high;
> > > > +	};
> > > > +
> > > > +};
> > > > +
> > > > +&emac {
> > > > +	phy-supply = <&reg_gmac_3v3>;
> > > > +};
> > >
> > > I might be missing some context here, but I'm pretty sure that the
> > > initial intent of the pine h64 DTS was to support the model A all
> > > along.
> > >
> >
> > The regulator changed between modelA and B.
> > See this old patchset (supporting modelA) https://patchwork.kernel.org/patch/10539149/ for example.
> 
> I'm not sure what your point is, but mine is that everything about the
> model A should be in sun50i-h6-pine-h64.dts.
> 

model A and B are different enough for distinct dtb, (see sub-thread on HDMI difference for an other difference than PHY regulator)
And clearly, the current dtb is for model B.

So do you mean that we need to create a new dtb for model B ? (and hack the current back to model A ?)

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Maxime Ripard <mripard-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Fri, 16 Aug 2019 11:35:13 +0200	[thread overview]
Message-ID: <20190816093513.GA25042@Red> (raw)
In-Reply-To: <20190814133322.dawzv3ityakxtqs4@flea>

On Wed, Aug 14, 2019 at 03:33:22PM +0200, Maxime Ripard wrote:
> On Wed, Aug 14, 2019 at 03:17:41PM +0200, Corentin Labbe wrote:
> > On Mon, Aug 12, 2019 at 11:40:00AM +0200, Maxime Ripard wrote:
> > > On Thu, Aug 08, 2019 at 10:42:53AM +0200, Corentin Labbe wrote:
> > > > This patch adds the evaluation variant of the model A of the PineH64.
> > > > The model A has the same size of the pine64 and has a PCIE slot.
> > > >
> > > > The only devicetree difference with current pineH64, is the PHY
> > > > regulator.
> > > >
> > > > Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > > ---
> > > >  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
> > > >  .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
> > > >  2 files changed, 27 insertions(+)
> > > >  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > >
> > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> > > > index f6db0611cb85..9a02166cbf72 100644
> > > > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > > > @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > new file mode 100644
> > > > index 000000000000..d8ff02747efe
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > @@ -0,0 +1,26 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > > > +/*
> > > > + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > > + */
> > > > +
> > > > +#include "sun50i-h6-pine-h64.dts"
> > > > +
> > > > +/ {
> > > > +	model = "Pine H64 model A evaluation board";
> > > > +	compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
> > > > +
> > > > +	reg_gmac_3v3: gmac-3v3 {
> > > > +		compatible = "regulator-fixed";
> > > > +		regulator-name = "vcc-gmac-3v3";
> > > > +		regulator-min-microvolt = <3300000>;
> > > > +		regulator-max-microvolt = <3300000>;
> > > > +		startup-delay-us = <100000>;
> > > > +		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> > > > +		enable-active-high;
> > > > +	};
> > > > +
> > > > +};
> > > > +
> > > > +&emac {
> > > > +	phy-supply = <&reg_gmac_3v3>;
> > > > +};
> > >
> > > I might be missing some context here, but I'm pretty sure that the
> > > initial intent of the pine h64 DTS was to support the model A all
> > > along.
> > >
> >
> > The regulator changed between modelA and B.
> > See this old patchset (supporting modelA) https://patchwork.kernel.org/patch/10539149/ for example.
> 
> I'm not sure what your point is, but mine is that everything about the
> model A should be in sun50i-h6-pine-h64.dts.
> 

model A and B are different enough for distinct dtb, (see sub-thread on HDMI difference for an other difference than PHY regulator)
And clearly, the current dtb is for model B.

So do you mean that we need to create a new dtb for model B ? (and hack the current back to model A ?)

Regards

WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <mripard@kernel.org>
Cc: mark.rutland@arm.com, robh+dt@kernel.org, wens@csie.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Fri, 16 Aug 2019 11:35:13 +0200	[thread overview]
Message-ID: <20190816093513.GA25042@Red> (raw)
In-Reply-To: <20190814133322.dawzv3ityakxtqs4@flea>

On Wed, Aug 14, 2019 at 03:33:22PM +0200, Maxime Ripard wrote:
> On Wed, Aug 14, 2019 at 03:17:41PM +0200, Corentin Labbe wrote:
> > On Mon, Aug 12, 2019 at 11:40:00AM +0200, Maxime Ripard wrote:
> > > On Thu, Aug 08, 2019 at 10:42:53AM +0200, Corentin Labbe wrote:
> > > > This patch adds the evaluation variant of the model A of the PineH64.
> > > > The model A has the same size of the pine64 and has a PCIE slot.
> > > >
> > > > The only devicetree difference with current pineH64, is the PHY
> > > > regulator.
> > > >
> > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > ---
> > > >  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
> > > >  .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
> > > >  2 files changed, 27 insertions(+)
> > > >  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > >
> > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> > > > index f6db0611cb85..9a02166cbf72 100644
> > > > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > > > @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
> > > >  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > new file mode 100644
> > > > index 000000000000..d8ff02747efe
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> > > > @@ -0,0 +1,26 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > > > +/*
> > > > + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > + */
> > > > +
> > > > +#include "sun50i-h6-pine-h64.dts"
> > > > +
> > > > +/ {
> > > > +	model = "Pine H64 model A evaluation board";
> > > > +	compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
> > > > +
> > > > +	reg_gmac_3v3: gmac-3v3 {
> > > > +		compatible = "regulator-fixed";
> > > > +		regulator-name = "vcc-gmac-3v3";
> > > > +		regulator-min-microvolt = <3300000>;
> > > > +		regulator-max-microvolt = <3300000>;
> > > > +		startup-delay-us = <100000>;
> > > > +		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> > > > +		enable-active-high;
> > > > +	};
> > > > +
> > > > +};
> > > > +
> > > > +&emac {
> > > > +	phy-supply = <&reg_gmac_3v3>;
> > > > +};
> > >
> > > I might be missing some context here, but I'm pretty sure that the
> > > initial intent of the pine h64 DTS was to support the model A all
> > > along.
> > >
> >
> > The regulator changed between modelA and B.
> > See this old patchset (supporting modelA) https://patchwork.kernel.org/patch/10539149/ for example.
> 
> I'm not sure what your point is, but mine is that everything about the
> model A should be in sun50i-h6-pine-h64.dts.
> 

model A and B are different enough for distinct dtb, (see sub-thread on HDMI difference for an other difference than PHY regulator)
And clearly, the current dtb is for model B.

So do you mean that we need to create a new dtb for model B ? (and hack the current back to model A ?)

Regards

  reply	other threads:[~2019-08-16  9:35 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08  8:42 [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board Corentin Labbe
2019-08-08  8:42 ` Corentin Labbe
2019-08-08  8:42 ` Corentin Labbe
2019-08-08 14:50 ` [linux-sunxi] " Clément Péron
2019-08-08 14:50   ` Clément Péron
2019-08-08 14:50   ` Clément Péron
2019-08-14 13:07   ` [linux-sunxi] " Corentin Labbe
2019-08-14 13:07     ` Corentin Labbe
2019-08-14 13:07     ` Corentin Labbe
2019-08-12  9:40 ` Maxime Ripard
2019-08-12  9:40   ` Maxime Ripard
2019-08-14 13:17   ` Corentin Labbe
2019-08-14 13:17     ` Corentin Labbe
2019-08-14 13:17     ` Corentin Labbe
2019-08-14 13:33     ` Maxime Ripard
2019-08-14 13:33       ` Maxime Ripard
2019-08-16  9:35       ` Corentin Labbe [this message]
2019-08-16  9:35         ` Corentin Labbe
2019-08-16  9:35         ` Corentin Labbe
2019-08-16 11:36         ` Maxime Ripard
2019-08-16 11:36           ` Maxime Ripard
2019-08-16 11:57           ` Corentin Labbe
2019-08-16 11:57             ` Corentin Labbe
2019-08-16 11:57             ` Corentin Labbe
2019-08-16 13:52             ` Maxime Ripard
2019-08-16 13:52               ` Maxime Ripard
2019-08-16 14:00               ` Corentin Labbe
2019-08-16 14:00                 ` Corentin Labbe
2019-08-16 14:00                 ` Corentin Labbe
2019-08-20 13:58                 ` Maxime Ripard
2019-08-20 13:58                   ` Maxime Ripard
2019-08-21  9:19                   ` Icenowy Zheng
2019-08-21  9:19                     ` Icenowy Zheng
2019-08-12 10:56 ` [linux-sunxi] " Jernej Škrabec
2019-08-12 10:56   ` Jernej Škrabec
2019-08-12 10:56   ` Jernej Škrabec
2019-08-14 13:20   ` [linux-sunxi] " Corentin Labbe
2019-08-14 13:20     ` Corentin Labbe
2019-08-14 13:20     ` Corentin Labbe
2019-08-14 13:28     ` [linux-sunxi] " Clément Péron
2019-08-14 13:28       ` Clément Péron
2019-08-16  9:50       ` Jernej Škrabec
2019-08-16  9:50         ` Jernej Škrabec
2019-08-16  9:50         ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816093513.GA25042@Red \
    --to=clabbe.montjoie@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.