From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Kevin Hilman <khilman@kernel.org>
Cc: linux-rtc@vger.kernel.org, linux-amlogic@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC
Date: Thu, 22 Aug 2019 23:11:47 +0200 [thread overview]
Message-ID: <20190822211147.GB27031@piout.net> (raw)
In-Reply-To: <20190812232850.8016-3-khilman@kernel.org>
On 12/08/2019 16:28:50-0700, Kevin Hilman wrote:
> From: Neil Armstrong <narmstrong@baylibre.com>
>
> The Amlogic Meson GX SoCs uses a special register to store the
> time in seconds to wakeup after a system suspend.
>
> In order to be able to reuse the RTC wakealarm feature, this
> driver implements a fake RTC device which uses the system time
> to deduce a suspend delay.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> [khilman: rebase to v5.3-rc, rework and modernization]
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/rtc/Kconfig | 11 +++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-meson-vrtc.c | 156 +++++++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+)
> create mode 100644 drivers/rtc/rtc-meson-vrtc.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Kevin Hilman <khilman@kernel.org>
Cc: linux-rtc@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC
Date: Thu, 22 Aug 2019 23:11:47 +0200 [thread overview]
Message-ID: <20190822211147.GB27031@piout.net> (raw)
In-Reply-To: <20190812232850.8016-3-khilman@kernel.org>
On 12/08/2019 16:28:50-0700, Kevin Hilman wrote:
> From: Neil Armstrong <narmstrong@baylibre.com>
>
> The Amlogic Meson GX SoCs uses a special register to store the
> time in seconds to wakeup after a system suspend.
>
> In order to be able to reuse the RTC wakealarm feature, this
> driver implements a fake RTC device which uses the system time
> to deduce a suspend delay.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> [khilman: rebase to v5.3-rc, rework and modernization]
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/rtc/Kconfig | 11 +++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-meson-vrtc.c | 156 +++++++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+)
> create mode 100644 drivers/rtc/rtc-meson-vrtc.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Kevin Hilman <khilman@kernel.org>
Cc: linux-rtc@vger.kernel.org, linux-amlogic@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC
Date: Thu, 22 Aug 2019 23:11:47 +0200 [thread overview]
Message-ID: <20190822211147.GB27031@piout.net> (raw)
In-Reply-To: <20190812232850.8016-3-khilman@kernel.org>
On 12/08/2019 16:28:50-0700, Kevin Hilman wrote:
> From: Neil Armstrong <narmstrong@baylibre.com>
>
> The Amlogic Meson GX SoCs uses a special register to store the
> time in seconds to wakeup after a system suspend.
>
> In order to be able to reuse the RTC wakealarm feature, this
> driver implements a fake RTC device which uses the system time
> to deduce a suspend delay.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> [khilman: rebase to v5.3-rc, rework and modernization]
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/rtc/Kconfig | 11 +++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-meson-vrtc.c | 156 +++++++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+)
> create mode 100644 drivers/rtc/rtc-meson-vrtc.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Kevin Hilman <khilman@kernel.org>
Cc: linux-rtc@vger.kernel.org, linux-amlogic@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC
Date: Thu, 22 Aug 2019 23:11:47 +0200 [thread overview]
Message-ID: <20190822211147.GB27031@piout.net> (raw)
In-Reply-To: <20190812232850.8016-3-khilman@kernel.org>
On 12/08/2019 16:28:50-0700, Kevin Hilman wrote:
> From: Neil Armstrong <narmstrong@baylibre.com>
>
> The Amlogic Meson GX SoCs uses a special register to store the
> time in seconds to wakeup after a system suspend.
>
> In order to be able to reuse the RTC wakealarm feature, this
> driver implements a fake RTC device which uses the system time
> to deduce a suspend delay.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> [khilman: rebase to v5.3-rc, rework and modernization]
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/rtc/Kconfig | 11 +++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-meson-vrtc.c | 156 +++++++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+)
> create mode 100644 drivers/rtc/rtc-meson-vrtc.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-08-22 21:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 23:28 [PATCH v3 0/2] rtc: add new Amlogic Virtual Wake RTC Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` [PATCH v3 1/2] dt-bindings: rtc: new binding for Amlogic VRTC Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 21:11 ` Alexandre Belloni
2019-08-12 23:28 ` [PATCH v3 2/2] rtc: Add Amlogic Virtual Wake RTC Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-12 23:28 ` Kevin Hilman
2019-08-22 21:11 ` Alexandre Belloni [this message]
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 21:11 ` Alexandre Belloni
2019-08-22 20:52 ` [PATCH v3 0/2] rtc: add new " Kevin Hilman
2019-08-22 20:52 ` Kevin Hilman
2019-08-22 20:52 ` Kevin Hilman
2019-08-22 20:52 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190822211147.GB27031@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.