From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: vigneshr@ti.com, richard@nod.at, linux-kernel@vger.kernel.org,
marek.vasut@gmail.com, linux-mtd@lists.infradead.org,
miquel.raynal@bootlin.com
Subject: Re: [PATCH 3/5] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
Date: Sun, 25 Aug 2019 13:32:41 +0200 [thread overview]
Message-ID: <20190825133241.5e920e69@collabora.com> (raw)
In-Reply-To: <20190823155325.13459-4-tudor.ambarus@microchip.com>
On Fri, 23 Aug 2019 15:53:39 +0000
<Tudor.Ambarus@microchip.com> wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> All flash parameters and settings should reside inside
> 'struct spi_nor_flash_parameter'. Drop the local copy of
> quad_enable() and use the one from 'struct spi_nor_flash_parameter'.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 38 ++++++++++++++++++++++----------------
> include/linux/mtd/spi-nor.h | 2 --
> 2 files changed, 22 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index e9b9cd70a999..6bd104c29cd9 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -4403,7 +4403,6 @@ static int spi_nor_setup(struct spi_nor *nor,
> {
> struct spi_nor_flash_parameter *params = &nor->params;
> u32 ignored_mask, shared_mask;
> - bool enable_quad_io;
> int err;
>
> /*
> @@ -4457,17 +4456,27 @@ static int spi_nor_setup(struct spi_nor *nor,
> return err;
> }
>
> - /* Enable Quad I/O if needed. */
> - enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> - spi_nor_get_protocol_width(nor->write_proto) == 4);
> - if (enable_quad_io && params->quad_enable)
> - nor->quad_enable = params->quad_enable;
> - else
> - nor->quad_enable = NULL;
> -
> return 0;
> }
>
> +/**
> + * spi_nor_quad_enable() - enable Quad I/O if needed.
> + * @nor: pointer to a 'struct spi_nor'
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_quad_enable(struct spi_nor *nor)
> +{
> + if (!nor->params.quad_enable)
> + return 0;
> +
> + if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> + spi_nor_get_protocol_width(nor->write_proto) == 4))
> + return 0;
> +
> + return nor->params.quad_enable(nor);
> +}
> +
> static int spi_nor_init(struct spi_nor *nor)
> {
> int err;
> @@ -4484,12 +4493,10 @@ static int spi_nor_init(struct spi_nor *nor)
> }
> }
>
> - if (nor->quad_enable) {
> - err = nor->quad_enable(nor);
> - if (err) {
> - dev_err(nor->dev, "quad mode not supported\n");
> - return err;
> - }
> + err = spi_nor_quad_enable(nor);
> + if (err) {
> + dev_err(nor->dev, "quad mode not supported\n");
> + return err;
> }
>
> if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
> @@ -4706,7 +4713,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> * - select op codes for (Fast) Read, Page Program and Sector Erase.
> * - set the number of dummy cycles (mode cycles + wait states).
> * - set the SPI protocols for register and memory accesses.
> - * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
> */
> ret = spi_nor_setup(nor, hwcaps);
> if (ret)
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 77ba692d9348..17787238f0e9 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -535,7 +535,6 @@ struct flash_info;
> * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
> * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
> * completely locked
> - * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
> * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
> * the SPI NOR Status Register.
> * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
> @@ -579,7 +578,6 @@ struct spi_nor {
> int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> - int (*quad_enable)(struct spi_nor *nor);
> int (*clear_sr_bp)(struct spi_nor *nor);
> struct spi_nor_flash_parameter params;
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: <marek.vasut@gmail.com>, <vigneshr@ti.com>,
<miquel.raynal@bootlin.com>, <richard@nod.at>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/5] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
Date: Sun, 25 Aug 2019 13:32:41 +0200 [thread overview]
Message-ID: <20190825133241.5e920e69@collabora.com> (raw)
In-Reply-To: <20190823155325.13459-4-tudor.ambarus@microchip.com>
On Fri, 23 Aug 2019 15:53:39 +0000
<Tudor.Ambarus@microchip.com> wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> All flash parameters and settings should reside inside
> 'struct spi_nor_flash_parameter'. Drop the local copy of
> quad_enable() and use the one from 'struct spi_nor_flash_parameter'.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 38 ++++++++++++++++++++++----------------
> include/linux/mtd/spi-nor.h | 2 --
> 2 files changed, 22 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index e9b9cd70a999..6bd104c29cd9 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -4403,7 +4403,6 @@ static int spi_nor_setup(struct spi_nor *nor,
> {
> struct spi_nor_flash_parameter *params = &nor->params;
> u32 ignored_mask, shared_mask;
> - bool enable_quad_io;
> int err;
>
> /*
> @@ -4457,17 +4456,27 @@ static int spi_nor_setup(struct spi_nor *nor,
> return err;
> }
>
> - /* Enable Quad I/O if needed. */
> - enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> - spi_nor_get_protocol_width(nor->write_proto) == 4);
> - if (enable_quad_io && params->quad_enable)
> - nor->quad_enable = params->quad_enable;
> - else
> - nor->quad_enable = NULL;
> -
> return 0;
> }
>
> +/**
> + * spi_nor_quad_enable() - enable Quad I/O if needed.
> + * @nor: pointer to a 'struct spi_nor'
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_quad_enable(struct spi_nor *nor)
> +{
> + if (!nor->params.quad_enable)
> + return 0;
> +
> + if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> + spi_nor_get_protocol_width(nor->write_proto) == 4))
> + return 0;
> +
> + return nor->params.quad_enable(nor);
> +}
> +
> static int spi_nor_init(struct spi_nor *nor)
> {
> int err;
> @@ -4484,12 +4493,10 @@ static int spi_nor_init(struct spi_nor *nor)
> }
> }
>
> - if (nor->quad_enable) {
> - err = nor->quad_enable(nor);
> - if (err) {
> - dev_err(nor->dev, "quad mode not supported\n");
> - return err;
> - }
> + err = spi_nor_quad_enable(nor);
> + if (err) {
> + dev_err(nor->dev, "quad mode not supported\n");
> + return err;
> }
>
> if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
> @@ -4706,7 +4713,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> * - select op codes for (Fast) Read, Page Program and Sector Erase.
> * - set the number of dummy cycles (mode cycles + wait states).
> * - set the SPI protocols for register and memory accesses.
> - * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
> */
> ret = spi_nor_setup(nor, hwcaps);
> if (ret)
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 77ba692d9348..17787238f0e9 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -535,7 +535,6 @@ struct flash_info;
> * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
> * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
> * completely locked
> - * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
> * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
> * the SPI NOR Status Register.
> * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
> @@ -579,7 +578,6 @@ struct spi_nor {
> int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> - int (*quad_enable)(struct spi_nor *nor);
> int (*clear_sr_bp)(struct spi_nor *nor);
> struct spi_nor_flash_parameter params;
>
next prev parent reply other threads:[~2019-08-25 11:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 15:53 [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-23 15:53 ` [PATCH 1/5] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-25 11:32 ` Boris Brezillon
2019-08-25 11:32 ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 2/5] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-25 11:31 ` Boris Brezillon
2019-08-25 11:31 ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 3/5] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-25 11:32 ` Boris Brezillon [this message]
2019-08-25 11:32 ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 4/5] mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-24 3:53 ` Tudor.Ambarus
2019-08-24 3:53 ` Tudor.Ambarus
2019-08-25 11:33 ` Boris Brezillon
2019-08-25 11:33 ` Boris Brezillon
2019-08-25 13:09 ` Boris Brezillon
2019-08-25 13:09 ` Boris Brezillon
2019-08-25 13:19 ` Tudor.Ambarus
2019-08-25 13:19 ` Tudor.Ambarus
2019-08-25 13:28 ` Boris Brezillon
2019-08-25 13:28 ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 5/5] mtd: spi-nor: Move erase_map " Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus
2019-08-25 11:34 ` Boris Brezillon
2019-08-25 11:34 ` Boris Brezillon
2019-08-25 11:38 ` [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Boris Brezillon
2019-08-25 11:38 ` Boris Brezillon
2019-08-25 13:02 ` Tudor.Ambarus
2019-08-25 13:02 ` Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190825133241.5e920e69@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.