All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Mike Leach <mike.leach@linaro.org>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	suzuki.poulose@arm.com
Subject: Re: [PATCH 1/8] coresight: etm4x: Fixes for ETM v4.4 architecture updates.
Date: Mon, 26 Aug 2019 15:47:13 -0600	[thread overview]
Message-ID: <20190826214713.GA24690@xps15> (raw)
In-Reply-To: <20190819205720.24457-2-mike.leach@linaro.org>

Hi Mike,


On Mon, Aug 19, 2019 at 09:57:13PM +0100, Mike Leach wrote:
> ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates).

What is the name of the ETMv4.4 document?  I can only find up to 4.2 on line.

> Patch accounts for this new capability.
> 
> Signed-off-by: Mike Leach <mike.leach@linaro.org>
> ---
>  .../hwtracing/coresight/coresight-etm4x-sysfs.c   | 12 ++++++------
>  drivers/hwtracing/coresight/coresight-etm4x.c     |  5 ++++-
>  drivers/hwtracing/coresight/coresight-etm4x.h     | 15 +++++++++++----
>  3 files changed, 21 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> index 219c10eb752c..b6984be0c515 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> @@ -738,7 +738,7 @@ static ssize_t s_exlevel_vinst_show(struct device *dev,
>  	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
>  	struct etmv4_config *config = &drvdata->config;
>  
> -	val = BMVAL(config->vinst_ctrl, 16, 19);
> +	val = (config->vinst_ctrl & ETM_EXLEVEL_S_VICTLR_MASK) >> 16;
>  	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
>  }
>  
> @@ -754,8 +754,8 @@ static ssize_t s_exlevel_vinst_store(struct device *dev,
>  		return -EINVAL;
>  
>  	spin_lock(&drvdata->spinlock);
> -	/* clear all EXLEVEL_S bits (bit[18] is never implemented) */
> -	config->vinst_ctrl &= ~(BIT(16) | BIT(17) | BIT(19));
> +	/* clear all EXLEVEL_S bits  */
> +	config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK);
>  	/* enable instruction tracing for corresponding exception level */
>  	val &= drvdata->s_ex_level;
>  	config->vinst_ctrl |= (val << 16);
> @@ -773,7 +773,7 @@ static ssize_t ns_exlevel_vinst_show(struct device *dev,
>  	struct etmv4_config *config = &drvdata->config;
>  
>  	/* EXLEVEL_NS, bits[23:20] */
> -	val = BMVAL(config->vinst_ctrl, 20, 23);
> +	val = (config->vinst_ctrl & ETM_EXLEVEL_NS_VICTLR_MASK) >> 20;
>  	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
>  }
>  
> @@ -789,8 +789,8 @@ static ssize_t ns_exlevel_vinst_store(struct device *dev,
>  		return -EINVAL;
>  
>  	spin_lock(&drvdata->spinlock);
> -	/* clear EXLEVEL_NS bits (bit[23] is never implemented */
> -	config->vinst_ctrl &= ~(BIT(20) | BIT(21) | BIT(22));
> +	/* clear EXLEVEL_NS bits  */
> +	config->vinst_ctrl &= ~(ETM_EXLEVEL_NS_VICTLR_MASK);
>  	/* enable instruction tracing for corresponding exception level */
>  	val &= drvdata->ns_ex_level;
>  	config->vinst_ctrl |= (val << 20);
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
> index a128b5063f46..52b8876de157 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
> @@ -629,6 +629,7 @@ static void etm4_init_arch_data(void *info)
>  	 * TRCARCHMAJ, bits[11:8] architecture major versin number
>  	 */
>  	drvdata->arch = BMVAL(etmidr1, 4, 11);
> +	drvdata->config.arch = drvdata->arch;
>  
>  	/* maximum size of resources */
>  	etmidr2 = readl_relaxed(drvdata->base + TRCIDR2);
> @@ -780,6 +781,7 @@ static u64 etm4_get_ns_access_type(struct etmv4_config *config)
>  static u64 etm4_get_access_type(struct etmv4_config *config)
>  {
>  	u64 access_type = etm4_get_ns_access_type(config);
> +	u64 s_hyp = (config->arch & 0x0f) >= 0x4 ? ETM_EXLEVEL_S_HYP : 0;
>  
>  	/*
>  	 * EXLEVEL_S, bits[11:8], don't trace anything happening
> @@ -787,7 +789,8 @@ static u64 etm4_get_access_type(struct etmv4_config *config)
>  	 */
>  	access_type |= (ETM_EXLEVEL_S_APP	|
>  			ETM_EXLEVEL_S_OS	|
> -			ETM_EXLEVEL_S_HYP);
> +			s_hyp			|
> +			ETM_EXLEVEL_S_MON);
>  
>  	return access_type;
>  }
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
> index 4523f10ddd0f..60bc2fb5159b 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.h
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
> @@ -180,17 +180,22 @@
>  /* PowerDown Control Register bits */
>  #define TRCPDCR_PU			BIT(3)
>  
> -/* secure state access levels */
> +/* secure state access levels - TRCACATRn */
>  #define ETM_EXLEVEL_S_APP		BIT(8)
>  #define ETM_EXLEVEL_S_OS		BIT(9)
> -#define ETM_EXLEVEL_S_NA		BIT(10)
> -#define ETM_EXLEVEL_S_HYP		BIT(11)
> -/* non-secure state access levels */
> +#define ETM_EXLEVEL_S_HYP		BIT(10)
> +#define ETM_EXLEVEL_S_MON		BIT(11)
> +/* non-secure state access levels - TRCACATRn */
>  #define ETM_EXLEVEL_NS_APP		BIT(12)
>  #define ETM_EXLEVEL_NS_OS		BIT(13)
>  #define ETM_EXLEVEL_NS_HYP		BIT(14)
>  #define ETM_EXLEVEL_NS_NA		BIT(15)
>  
> +/* secure / non secure masks - TRCVICTLR, IDR3 */
> +#define ETM_EXLEVEL_S_VICTLR_MASK	GENMASK(19, 16)
> +/* NS MON (EL3) mode never implemented */
> +#define ETM_EXLEVEL_NS_VICTLR_MASK	GENMASK(22, 20)

It is hard to say without documentation but shouldn't this be GENMASK(23, 20)?  

> +
>  /**
>   * struct etmv4_config - configuration information related to an ETMv4
>   * @mode:	Controls various modes supported by this ETM.
> @@ -237,6 +242,7 @@
>   * @vmid_mask0:	VM ID comparator mask for comparator 0-3.
>   * @vmid_mask1:	VM ID comparator mask for comparator 4-7.
>   * @ext_inp:	External input selection.
> + * @arch:	ETM architecture version (for arch dependent config).
>   */
>  struct etmv4_config {
>  	u32				mode;
> @@ -279,6 +285,7 @@ struct etmv4_config {
>  	u32				vmid_mask0;
>  	u32				vmid_mask1;
>  	u32				ext_inp;
> +	u8				arch;
>  };
>  
>  /**
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-08-26 21:47 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19 20:57 [PATCH 0/8] coresight: etm4x: Fixes and updates for sysfs API Mike Leach
2019-08-19 20:57 ` [PATCH 1/8] coresight: etm4x: Fixes for ETM v4.4 architecture updates Mike Leach
2019-08-26 21:47   ` Mathieu Poirier [this message]
2019-08-27 10:12     ` Mike Leach
2019-08-27 19:19       ` Mathieu Poirier
2019-08-28  1:52   ` Leo Yan
2019-08-19 20:57 ` [PATCH 2/8] coresight: etm4x: Fix input validation for sysfs Mike Leach
2019-08-26 22:29   ` Mathieu Poirier
2019-08-28  2:42   ` Leo Yan
2019-08-19 20:57 ` [PATCH 3/8] coresight: etm4x: Add missing API to set EL match on address filters Mike Leach
2019-08-26 22:59   ` Mathieu Poirier
2019-08-27 10:55     ` Mike Leach
2019-08-27 17:57       ` Mathieu Poirier
2019-08-28  2:53   ` Leo Yan
2019-08-28 12:10     ` Mike Leach
2019-08-19 20:57 ` [PATCH 4/8] coresight: etm4x: Fix issues with start-stop logic Mike Leach
2019-08-28  3:17   ` Leo Yan
2019-08-28 12:40     ` Mike Leach
2019-08-19 20:57 ` [PATCH 5/8] coresight: etm4x: Improve usability of sysfs API Mike Leach
2019-08-27 21:35   ` Mathieu Poirier
2019-08-28  3:36   ` Leo Yan
2019-08-28 12:56     ` Mike Leach
2019-08-19 20:57 ` [PATCH 6/8] coresight: etm4x: Add view comparator settings API to sysfs Mike Leach
2019-08-27 21:40   ` Mathieu Poirier
2019-08-28  4:00   ` Leo Yan
2019-08-19 20:57 ` [PATCH 7/8] coresight: etm4x: Add missing single-shot control " Mike Leach
2019-08-27 22:27   ` Mathieu Poirier
2019-08-28 14:15     ` Mike Leach
2019-08-28  5:18   ` Leo Yan
2019-08-28 14:15     ` Mike Leach
2019-08-19 20:57 ` [PATCH 8/8] coresight: etm4x: docs: Additional documentation for ETM4x Mike Leach
2019-08-27 22:32   ` Mathieu Poirier
2019-08-27 22:34   ` Mathieu Poirier
2019-08-28 14:20     ` Mike Leach
2019-08-28 16:36       ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190826214713.GA24690@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=coresight@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mike.leach@linaro.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.