From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Mike Leach <mike.leach@linaro.org>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
suzuki.poulose@arm.com
Subject: Re: [PATCH 5/8] coresight: etm4x: Improve usability of sysfs API.
Date: Tue, 27 Aug 2019 15:35:14 -0600 [thread overview]
Message-ID: <20190827213514.GA14958@xps15> (raw)
In-Reply-To: <20190819205720.24457-6-mike.leach@linaro.org>
On Mon, Aug 19, 2019 at 09:57:17PM +0100, Mike Leach wrote:
> Some changes to make the sysfs programming more intuitive.
>
> 1) Setting include / exclude on a range had to be done by setting
> the bit in 'mode' before setting the range. However, setting this
> bit also had the effect of altering the current range as well.
>
> Changed to only set include / exclude setting of a range at the point of
> setting that range. Either use a 3rd input parameter as the include exclude
> value, or if not present use the current value of 'mode'. Do not change
> current range when 'mode' changes.
>
> 2) Context ID and VM ID masks required 2 value inputs, even when the
> second value is ignored as insufficient CID / VMID comparators are
> implemented.
> Permit a single value to be used if that is sufficient to cover all
> implemented comparators.
Please split in two patches. With that:
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>
> Signed-off-by: Mike Leach <mike.leach@linaro.org>
> ---
> .../coresight/coresight-etm4x-sysfs.c | 24 +++++++++++++------
> 1 file changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> index 3bcc260c9e55..baac5b48b7ac 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> @@ -297,8 +297,6 @@ static ssize_t mode_store(struct device *dev,
>
> spin_lock(&drvdata->spinlock);
> config->mode = val & ETMv4_MODE_ALL;
> - etm4_set_mode_exclude(drvdata,
> - config->mode & ETM_MODE_EXCLUDE ? true : false);
>
> if (drvdata->instrp0 == true) {
> /* start by clearing instruction P0 field */
> @@ -972,8 +970,12 @@ static ssize_t addr_range_store(struct device *dev,
> unsigned long val1, val2;
> struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
> struct etmv4_config *config = &drvdata->config;
> + int elements, exclude;
>
> - if (sscanf(buf, "%lx %lx", &val1, &val2) != 2)
> + elements = sscanf(buf, "%lx %lx %x", &val1, &val2, &exclude);
> +
> + /* exclude is optional, but need at least two parameter */
> + if (elements < 2)
> return -EINVAL;
> /* lower address comparator cannot have a higher address value */
> if (val1 > val2)
> @@ -1001,9 +1003,11 @@ static ssize_t addr_range_store(struct device *dev,
> /*
> * Program include or exclude control bits for vinst or vdata
> * whenever we change addr comparators to ETM_ADDR_TYPE_RANGE
> + * use supplied value, or default to bit set in 'mode'
> */
> - etm4_set_mode_exclude(drvdata,
> - config->mode & ETM_MODE_EXCLUDE ? true : false);
> + if (elements != 3)
> + exclude = config->mode & ETM_MODE_EXCLUDE;
> + etm4_set_mode_exclude(drvdata, exclude ? true : false);
>
> spin_unlock(&drvdata->spinlock);
> return size;
> @@ -1787,6 +1791,7 @@ static ssize_t ctxid_masks_store(struct device *dev,
> unsigned long val1, val2, mask;
> struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
> struct etmv4_config *config = &drvdata->config;
> + int nr_inputs;
>
> /*
> * Don't use contextID tracing if coming from a PID namespace. See
> @@ -1802,7 +1807,9 @@ static ssize_t ctxid_masks_store(struct device *dev,
> */
> if (!drvdata->ctxid_size || !drvdata->numcidc)
> return -EINVAL;
> - if (sscanf(buf, "%lx %lx", &val1, &val2) != 2)
> + /* one mask if < 4 comparators, two for up to 8 */
> + nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2);
> + if ((drvdata->numcidc > 4) && (nr_inputs != 2))
> return -EINVAL;
>
> spin_lock(&drvdata->spinlock);
> @@ -1976,6 +1983,7 @@ static ssize_t vmid_masks_store(struct device *dev,
> unsigned long val1, val2, mask;
> struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
> struct etmv4_config *config = &drvdata->config;
> + int nr_inputs;
>
> /*
> * only implemented when vmid tracing is enabled, i.e. at least one
> @@ -1983,7 +1991,9 @@ static ssize_t vmid_masks_store(struct device *dev,
> */
> if (!drvdata->vmid_size || !drvdata->numvmidc)
> return -EINVAL;
> - if (sscanf(buf, "%lx %lx", &val1, &val2) != 2)
> + /* one mask if < 4 comparators, two for up to 8 */
> + nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2);
> + if ((drvdata->numvmidc > 4) && (nr_inputs != 2))
> return -EINVAL;
>
> spin_lock(&drvdata->spinlock);
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-27 21:35 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 20:57 [PATCH 0/8] coresight: etm4x: Fixes and updates for sysfs API Mike Leach
2019-08-19 20:57 ` [PATCH 1/8] coresight: etm4x: Fixes for ETM v4.4 architecture updates Mike Leach
2019-08-26 21:47 ` Mathieu Poirier
2019-08-27 10:12 ` Mike Leach
2019-08-27 19:19 ` Mathieu Poirier
2019-08-28 1:52 ` Leo Yan
2019-08-19 20:57 ` [PATCH 2/8] coresight: etm4x: Fix input validation for sysfs Mike Leach
2019-08-26 22:29 ` Mathieu Poirier
2019-08-28 2:42 ` Leo Yan
2019-08-19 20:57 ` [PATCH 3/8] coresight: etm4x: Add missing API to set EL match on address filters Mike Leach
2019-08-26 22:59 ` Mathieu Poirier
2019-08-27 10:55 ` Mike Leach
2019-08-27 17:57 ` Mathieu Poirier
2019-08-28 2:53 ` Leo Yan
2019-08-28 12:10 ` Mike Leach
2019-08-19 20:57 ` [PATCH 4/8] coresight: etm4x: Fix issues with start-stop logic Mike Leach
2019-08-28 3:17 ` Leo Yan
2019-08-28 12:40 ` Mike Leach
2019-08-19 20:57 ` [PATCH 5/8] coresight: etm4x: Improve usability of sysfs API Mike Leach
2019-08-27 21:35 ` Mathieu Poirier [this message]
2019-08-28 3:36 ` Leo Yan
2019-08-28 12:56 ` Mike Leach
2019-08-19 20:57 ` [PATCH 6/8] coresight: etm4x: Add view comparator settings API to sysfs Mike Leach
2019-08-27 21:40 ` Mathieu Poirier
2019-08-28 4:00 ` Leo Yan
2019-08-19 20:57 ` [PATCH 7/8] coresight: etm4x: Add missing single-shot control " Mike Leach
2019-08-27 22:27 ` Mathieu Poirier
2019-08-28 14:15 ` Mike Leach
2019-08-28 5:18 ` Leo Yan
2019-08-28 14:15 ` Mike Leach
2019-08-19 20:57 ` [PATCH 8/8] coresight: etm4x: docs: Additional documentation for ETM4x Mike Leach
2019-08-27 22:32 ` Mathieu Poirier
2019-08-27 22:34 ` Mathieu Poirier
2019-08-28 14:20 ` Mike Leach
2019-08-28 16:36 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827213514.GA14958@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=coresight@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.