From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
Date: Wed, 28 Aug 2019 20:27:22 +0000 [thread overview]
Message-ID: <20190828202723.1145-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190828202723.1145-1-linux.amoon@gmail.com>
As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 98e742bf44c1..a078a1ee5004 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
};
tflash_vdd: regulator-tflash_vdd {
- /*
- * signal name from schematics: TFLASH_VDD_EN
- */
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /* U16 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
states = <3300000 0
1800000 1>;
+ /* U12/U13 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ /* U18 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vddio_ao1v8: regulator-vddio-ao1v8 {
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
Date: Wed, 28 Aug 2019 20:27:22 +0000 [thread overview]
Message-ID: <20190828202723.1145-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190828202723.1145-1-linux.amoon@gmail.com>
As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 98e742bf44c1..a078a1ee5004 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
};
tflash_vdd: regulator-tflash_vdd {
- /*
- * signal name from schematics: TFLASH_VDD_EN
- */
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /* U16 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
states = <3300000 0
1800000 1>;
+ /* U12/U13 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ /* U18 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vddio_ao1v8: regulator-vddio-ao1v8 {
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
Date: Wed, 28 Aug 2019 20:27:22 +0000 [thread overview]
Message-ID: <20190828202723.1145-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190828202723.1145-1-linux.amoon@gmail.com>
As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 98e742bf44c1..a078a1ee5004 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
};
tflash_vdd: regulator-tflash_vdd {
- /*
- * signal name from schematics: TFLASH_VDD_EN
- */
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /* U16 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
states = <3300000 0
1800000 1>;
+ /* U12/U13 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ /* U18 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vddio_ao1v8: regulator-vddio-ao1v8 {
--
2.23.0
next prev parent reply other threads:[~2019-08-28 20:28 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 20:27 [PATCHv1 0/3] Odroid c2 missing regulator linking Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-08-28 20:27 ` [PATCHv1 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-09-01 11:37 ` Martin Blumenstingl
2019-09-01 11:37 ` Martin Blumenstingl
2019-09-01 11:37 ` Martin Blumenstingl
2019-09-01 13:57 ` Anand Moon
2019-09-01 13:57 ` Anand Moon
2019-09-01 13:57 ` Anand Moon
2019-09-01 13:57 ` Anand Moon
2019-09-01 21:53 ` Martin Blumenstingl
2019-09-01 21:53 ` Martin Blumenstingl
2019-09-01 21:53 ` Martin Blumenstingl
2019-09-02 1:18 ` Anand Moon
2019-09-02 1:18 ` Anand Moon
2019-09-02 1:18 ` Anand Moon
2019-09-03 6:07 ` kbuild test robot
2019-09-03 6:07 ` kbuild test robot
2019-09-03 6:07 ` kbuild test robot
2019-08-28 20:27 ` Anand Moon [this message]
2019-08-28 20:27 ` [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-09-01 11:41 ` Martin Blumenstingl
2019-09-01 11:41 ` Martin Blumenstingl
2019-09-01 11:41 ` Martin Blumenstingl
2019-09-01 11:41 ` Martin Blumenstingl
2019-09-01 13:56 ` Anand Moon
2019-09-01 13:56 ` Anand Moon
2019-09-01 13:56 ` Anand Moon
2019-08-28 20:27 ` [PATCHv1 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-08-28 20:27 ` Anand Moon
2019-09-01 11:44 ` Martin Blumenstingl
2019-09-01 11:44 ` Martin Blumenstingl
2019-09-01 11:44 ` Martin Blumenstingl
2019-09-01 13:58 ` Anand Moon
2019-09-01 13:58 ` Anand Moon
2019-09-01 13:58 ` Anand Moon
2019-08-29 8:28 ` [PATCHv1 0/3] Odroid c2 missing regulator linking Neil Armstrong
2019-08-29 8:28 ` Neil Armstrong
2019-08-29 8:28 ` Neil Armstrong
2019-08-29 18:35 ` Anand Moon
2019-08-29 18:35 ` Anand Moon
2019-08-29 18:35 ` Anand Moon
2019-08-30 7:31 ` Neil Armstrong
2019-08-30 7:31 ` Neil Armstrong
2019-08-30 7:31 ` Neil Armstrong
2019-08-30 9:34 ` Anand Moon
2019-08-30 9:34 ` Anand Moon
2019-08-30 9:34 ` Anand Moon
2019-08-30 9:50 ` Neil Armstrong
2019-08-30 9:50 ` Neil Armstrong
2019-08-30 9:50 ` Neil Armstrong
2019-09-03 19:07 ` Martin Blumenstingl
2019-09-03 19:07 ` Martin Blumenstingl
2019-09-03 19:07 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828202723.1145-3-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.