From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <mripard@kernel.org>
Cc: davem@davemloft.net, herbert@gondor.apana.org.au,
linux@armlinux.org.uk, mark.rutland@arm.com, robh+dt@kernel.org,
wens@csie.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com
Subject: Re: [PATCH 4/9] ARM: dts: sun8i: r40: add crypto engine node
Date: Sat, 7 Sep 2019 19:54:07 +0200 [thread overview]
Message-ID: <20190907175407.GB2628@Red> (raw)
In-Reply-To: <20190907040217.kzvq7gfxz67pluhz@flea>
On Sat, Sep 07, 2019 at 07:02:17AM +0300, Maxime Ripard wrote:
> On Fri, Sep 06, 2019 at 08:45:46PM +0200, Corentin Labbe wrote:
> > The Crypto Engine is a hardware cryptographic offloader that supports
> > many algorithms.
> > It could be found on most Allwinner SoCs.
> >
> > This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > arch/arm/boot/dts/sun8i-r40.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> > index bde068111b85..7eb649cea163 100644
> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> > @@ -266,6 +266,17 @@
> > #phy-cells = <1>;
> > };
> >
> > + crypto: crypto-engine@1c15000 {
> > + compatible = "allwinner,sun8i-r40-crypto";
> > + reg = <0x01c15000 0x1000>;
> > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> > + clock-names = "ahb", "mod";
> > + resets = <&ccu RST_BUS_CE>;
> > + reset-names = "ahb";
> > + status = "okay";
>
> The driver will probe if status is not declared, so if you want it
> always enabled you should simply remove status
>
Fixed, thanks.
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <mripard@kernel.org>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
herbert@gondor.apana.org.au, linux-sunxi@googlegroups.com,
linux@armlinux.org.uk, linux-kernel@vger.kernel.org,
wens@csie.org, robh+dt@kernel.org, linux-crypto@vger.kernel.org,
davem@davemloft.net, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/9] ARM: dts: sun8i: r40: add crypto engine node
Date: Sat, 7 Sep 2019 19:54:07 +0200 [thread overview]
Message-ID: <20190907175407.GB2628@Red> (raw)
In-Reply-To: <20190907040217.kzvq7gfxz67pluhz@flea>
On Sat, Sep 07, 2019 at 07:02:17AM +0300, Maxime Ripard wrote:
> On Fri, Sep 06, 2019 at 08:45:46PM +0200, Corentin Labbe wrote:
> > The Crypto Engine is a hardware cryptographic offloader that supports
> > many algorithms.
> > It could be found on most Allwinner SoCs.
> >
> > This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > arch/arm/boot/dts/sun8i-r40.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> > index bde068111b85..7eb649cea163 100644
> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> > @@ -266,6 +266,17 @@
> > #phy-cells = <1>;
> > };
> >
> > + crypto: crypto-engine@1c15000 {
> > + compatible = "allwinner,sun8i-r40-crypto";
> > + reg = <0x01c15000 0x1000>;
> > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> > + clock-names = "ahb", "mod";
> > + resets = <&ccu RST_BUS_CE>;
> > + reset-names = "ahb";
> > + status = "okay";
>
> The driver will probe if status is not declared, so if you want it
> always enabled you should simply remove status
>
Fixed, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Maxime Ripard <mripard-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
herbert-lOAM2aK0SrRLBo1qDEOMRrpzq4S04n8Q@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 4/9] ARM: dts: sun8i: r40: add crypto engine node
Date: Sat, 7 Sep 2019 19:54:07 +0200 [thread overview]
Message-ID: <20190907175407.GB2628@Red> (raw)
In-Reply-To: <20190907040217.kzvq7gfxz67pluhz@flea>
On Sat, Sep 07, 2019 at 07:02:17AM +0300, Maxime Ripard wrote:
> On Fri, Sep 06, 2019 at 08:45:46PM +0200, Corentin Labbe wrote:
> > The Crypto Engine is a hardware cryptographic offloader that supports
> > many algorithms.
> > It could be found on most Allwinner SoCs.
> >
> > This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> > arch/arm/boot/dts/sun8i-r40.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> > index bde068111b85..7eb649cea163 100644
> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> > @@ -266,6 +266,17 @@
> > #phy-cells = <1>;
> > };
> >
> > + crypto: crypto-engine@1c15000 {
> > + compatible = "allwinner,sun8i-r40-crypto";
> > + reg = <0x01c15000 0x1000>;
> > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> > + clock-names = "ahb", "mod";
> > + resets = <&ccu RST_BUS_CE>;
> > + reset-names = "ahb";
> > + status = "okay";
>
> The driver will probe if status is not declared, so if you want it
> always enabled you should simply remove status
>
Fixed, thanks.
next prev parent reply other threads:[~2019-09-07 17:54 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 18:45 [PATCH 0/9] crypto: add sun8i-ce driver for Allwinner crypto engine Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 1/9] crypto: Add allwinner subdirectory Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 3:54 ` Maxime Ripard
2019-09-07 3:54 ` Maxime Ripard
2019-09-07 17:53 ` Corentin Labbe
2019-09-07 17:53 ` Corentin Labbe
2019-09-07 17:53 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 2/9] crypto: Add Allwinner sun8i-ce Crypto Engine Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 8:19 ` Maxime Ripard
2019-09-07 8:19 ` Maxime Ripard
2019-09-07 19:04 ` Corentin Labbe
2019-09-07 19:04 ` Corentin Labbe
2019-09-07 19:04 ` Corentin Labbe
2019-09-09 11:38 ` Maxime Ripard
2019-09-09 11:38 ` Maxime Ripard
2019-09-09 13:19 ` Corentin Labbe
2019-09-09 13:19 ` Corentin Labbe
2019-09-09 13:19 ` Corentin Labbe
2019-09-09 13:59 ` Maxime Ripard
2019-09-09 13:59 ` Maxime Ripard
2019-09-06 18:45 ` [PATCH 3/9] dt-bindings: crypto: Add DT bindings documentation for " Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 4:01 ` Maxime Ripard
2019-09-07 4:01 ` Maxime Ripard
2019-09-11 18:31 ` Corentin Labbe
2019-09-11 18:31 ` Corentin Labbe
2019-09-11 18:31 ` Corentin Labbe
2019-09-12 9:37 ` Maxime Ripard
2019-09-12 9:37 ` Maxime Ripard
2019-09-12 20:26 ` Chen-Yu Tsai
2019-09-12 20:26 ` Chen-Yu Tsai
2019-09-12 20:26 ` Chen-Yu Tsai
2019-09-12 20:33 ` Maxime Ripard
2019-09-12 20:33 ` Maxime Ripard
2019-09-12 20:37 ` Chen-Yu Tsai
2019-09-12 20:37 ` Chen-Yu Tsai
2019-09-13 12:11 ` Maxime Ripard
2019-09-13 12:11 ` Maxime Ripard
2019-09-06 18:45 ` [PATCH 4/9] ARM: dts: sun8i: r40: add crypto engine node Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 4:02 ` Maxime Ripard
2019-09-07 4:02 ` Maxime Ripard
2019-09-07 17:54 ` Corentin Labbe [this message]
2019-09-07 17:54 ` Corentin Labbe
2019-09-07 17:54 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 5/9] ARM: dts: sun8i: h3: Add Crypto Engine node Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 6/9] ARM64: dts: allwinner: sun50i: Add Crypto Engine node on A64 Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 4:02 ` Maxime Ripard
2019-09-07 4:02 ` Maxime Ripard
2019-09-07 17:54 ` Corentin Labbe
2019-09-07 17:54 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 7/9] ARM64: dts: allwinner: sun50i: Add crypto engine node on H5 Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 8/9] ARM64: dts: allwinner: sun50i: Add Crypto Engine node on H6 Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` [PATCH 9/9] sunxi_defconfig: add new crypto options Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-06 18:45 ` Corentin Labbe
2019-09-07 4:03 ` Maxime Ripard
2019-09-07 4:03 ` Maxime Ripard
2019-09-07 17:55 ` Corentin Labbe
2019-09-07 17:55 ` Corentin Labbe
2019-09-07 17:55 ` Corentin Labbe
2019-09-13 8:15 ` Corentin Labbe
2019-09-13 8:15 ` Corentin Labbe
2019-09-13 8:15 ` Corentin Labbe
2019-09-13 12:10 ` Maxime Ripard
2019-09-13 12:10 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190907175407.GB2628@Red \
--to=clabbe.montjoie@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.