From: Sasha Levin <sashal@kernel.org>
To: Sasha Levin <sashal@kernel.org>,
Christian Lamparter <chunkeey@gmail.com>,
linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Cc: stable@vger.kernel.org, Kalle Valo <kvalo@codeaurora.org>
Subject: Re: [PATCH] ath10k: restore QCA9880-AR1A (v1) detection
Date: Sat, 07 Sep 2019 21:43:58 +0000 [thread overview]
Message-ID: <20190907214359.1C52A21835@mail.kernel.org> (raw)
In-Reply-To: <20190906215423.23589-1-chunkeey@gmail.com>
Hi,
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag,
fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
v5.2.13: Failed to apply! Possible dependencies:
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
v4.19.71: Failed to apply! Possible dependencies:
31324d17976e ("ath10k: support extended board data download for dual-band QCA9984")
5849ed48d226 ("ath10k: refactoring needed for extended board data download")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
7c2dd6154fc2 ("ath10k: add device type enum to ath10k_bus_params")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
de8781d7e74d ("ath10k: disable interface pause wow config for integrated chipset")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.14.142: Failed to apply! Possible dependencies:
0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
2a1e1ad3fd37 ("ath10k: Add support for 64 bit ce descriptor")
50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
5dac5f3772f6 ("ath10k: Use dma_addr_t for ce buffers to support 64bit target")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
7f9befbb555d ("ath10k: move pktlog_filter out of ath10k_debug")
84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
dafa42036012 ("ath10k: use 64-bit crash dump timestamps")
e2fcf60c6fe8 ("ath10k: detach coredump.c from debug.c")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
f25b9f285a0e ("ath10k: refactor firmware crashdump code to coredump.c")
v4.9.191: Failed to apply! Possible dependencies:
0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
4db66499df91 ("ath10k: add initial USB support")
50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
5524ddd4c1f1 ("ath10k: select WANT_DEV_COREDUMP")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4")
d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
d96db25d2025 ("ath10k: add initial SDIO support")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.4.191: Failed to apply! Possible dependencies:
0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
0d87c9208a17 ("ath10k: expose hif ops for ahb")
133df0f849bc ("ath10k: add chip and bus halt logic in ahb")
14854bfd9daa ("ath10k: add reset ctrl related functions in ahb")
1c44fcb9234c ("ath10k: include irq related functions in ahb")
4ddb3299aa49 ("ath10k: make ath10k_pci_read32/write32() ops more generic")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
704dc4e36769 ("ath10k: add resource init and deinit in ahb")
7f8e79cdc253 ("ath10k: add helper functions in ahb.c for reg rd/wr")
8beff219c528 ("ath10k: add clock ctrl related functions in ahb")
f52f517189de ("ath10k: make some of ath10k_pci_* func reusable")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks,
Sasha
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: Sasha Levin <sashal@kernel.org>
To: Christian Lamparter <chunkeey@gmail.com>
To: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: Re: [PATCH] ath10k: restore QCA9880-AR1A (v1) detection
Date: Sat, 07 Sep 2019 21:43:58 +0000 [thread overview]
Message-ID: <20190907214359.1C52A21835@mail.kernel.org> (raw)
In-Reply-To: <20190906215423.23589-1-chunkeey@gmail.com>
Hi,
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag,
fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
v5.2.13: Failed to apply! Possible dependencies:
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
v4.19.71: Failed to apply! Possible dependencies:
31324d17976e ("ath10k: support extended board data download for dual-band QCA9984")
5849ed48d226 ("ath10k: refactoring needed for extended board data download")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
7c2dd6154fc2 ("ath10k: add device type enum to ath10k_bus_params")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
de8781d7e74d ("ath10k: disable interface pause wow config for integrated chipset")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.14.142: Failed to apply! Possible dependencies:
0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
2a1e1ad3fd37 ("ath10k: Add support for 64 bit ce descriptor")
50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
5dac5f3772f6 ("ath10k: Use dma_addr_t for ce buffers to support 64bit target")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
7f9befbb555d ("ath10k: move pktlog_filter out of ath10k_debug")
84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
dafa42036012 ("ath10k: use 64-bit crash dump timestamps")
e2fcf60c6fe8 ("ath10k: detach coredump.c from debug.c")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
f25b9f285a0e ("ath10k: refactor firmware crashdump code to coredump.c")
v4.9.191: Failed to apply! Possible dependencies:
0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
4db66499df91 ("ath10k: add initial USB support")
50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
5524ddd4c1f1 ("ath10k: select WANT_DEV_COREDUMP")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
c0d8d565787c ("ath10k: add struct ath10k_bus_params")
c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4")
d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
d96db25d2025 ("ath10k: add initial SDIO support")
f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.4.191: Failed to apply! Possible dependencies:
0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
0d87c9208a17 ("ath10k: expose hif ops for ahb")
133df0f849bc ("ath10k: add chip and bus halt logic in ahb")
14854bfd9daa ("ath10k: add reset ctrl related functions in ahb")
1c44fcb9234c ("ath10k: include irq related functions in ahb")
4ddb3299aa49 ("ath10k: make ath10k_pci_read32/write32() ops more generic")
6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
704dc4e36769 ("ath10k: add resource init and deinit in ahb")
7f8e79cdc253 ("ath10k: add helper functions in ahb.c for reg rd/wr")
8beff219c528 ("ath10k: add clock ctrl related functions in ahb")
f52f517189de ("ath10k: make some of ath10k_pci_* func reusable")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks,
Sasha
next prev parent reply other threads:[~2019-09-07 21:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 21:54 [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Christian Lamparter
2019-09-06 21:54 ` Christian Lamparter
2019-09-07 21:43 ` Sasha Levin [this message]
2019-09-07 21:43 ` Sasha Levin
2019-09-07 23:18 ` stable backports for "ath10k: restore QCA9880-AR1A (v1) detection" Christian Lamparter
2019-09-07 23:18 ` Christian Lamparter
2019-09-10 1:27 ` [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Tom Psyborg
2019-09-10 1:27 ` Tom Psyborg
2019-09-10 7:21 ` Kalle Valo
2019-09-10 7:21 ` Kalle Valo
2019-09-10 12:59 ` Tom Psyborg
2019-09-10 12:59 ` Tom Psyborg
2019-09-10 13:51 ` Sebastian Gottschall
2019-09-10 14:11 ` Ben Greear
2019-09-10 14:20 ` Sebastian Gottschall
2019-09-08 6:32 ` Tom Psyborg
2019-09-08 6:32 ` Tom Psyborg
2019-09-17 6:44 ` Kalle Valo
2019-09-17 6:44 ` Kalle Valo
2019-09-18 21:30 ` Tom Psyborg
2019-09-18 21:30 ` Tom Psyborg
[not found] ` <20190917064412.C2E0D61572@smtp.codeaurora.org>
2019-09-20 17:19 ` Christian Lamparter
2019-09-20 17:19 ` Christian Lamparter
2019-10-01 13:03 ` Kalle Valo
2019-10-01 13:03 ` Kalle Valo
2019-10-01 14:17 ` Tom Psyborg
2019-10-01 14:17 ` Tom Psyborg
2019-10-02 17:19 ` Kalle Valo
2019-10-02 17:19 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190907214359.1C52A21835@mail.kernel.org \
--to=sashal@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=chunkeey@gmail.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.