All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: "André Draszik" <git@andred.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Igor Grinberg <grinberg@compulab.co.il>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Ilya Ledvich <ilya@compulab.co.il>,
	NXP Linux Team <linux-imx@nxp.com>
Subject: Re: [PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB
Date: Fri, 13 Sep 2019 11:31:46 +0800	[thread overview]
Message-ID: <20190913033145.GG17142@dragon> (raw)
In-Reply-To: <20190826153800.35400-1-git@andred.net>

On Mon, Aug 26, 2019 at 04:37:49PM +0100, André Draszik wrote:
> Whether and which USB port is enabled and how they
> are powered is a function of the carrier board, not
> of the SoM. Different carrier boards can have different
> ports enabled / wired up, and power them differently;
> so this should really move into the respective DTS.
> 
> Do so and update the USB power supply to reflect
> the actual situation on the sbc-imx7 carrier board.
> 
> Signed-off-by: André Draszik <git@andred.net>
> Cc: Ilya Ledvich <ilya@compulab.co.il>
> Cc: Igor Grinberg <grinberg@compulab.co.il>

Ilya, Igor, can you have a look at the series?

Shawn

> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
>  arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------
>  arch/arm/boot/dts/imx7d-sbc-imx7.dts    | 13 +++++++++++++
>  2 files changed, 13 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> index 62d5e9a4a781..6f7e85cf0c28 100644
> --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -22,15 +22,6 @@
>  		device_type = "memory";
>  		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
>  	};
> -
> -	reg_usb_otg1_vbus: regulator-vbus {
> -		compatible = "regulator-fixed";
> -		regulator-name = "usb_otg1_vbus";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> -		enable-active-high;
> -	};
>  };
>  
>  &cpu0 {
> @@ -193,13 +184,6 @@
>  	status = "okay";
>  };
>  
> -&usbotg1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_usbotg1>;
> -	vbus-supply = <&reg_usb_otg1_vbus>;
> -	status = "okay";
> -};
> -
>  &usdhc3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -278,11 +262,3 @@
>  		>;
>  	};
>  };
> -
> -&iomuxc_lpsr {
> -	pinctrl_usbotg1: usbotg1grp {
> -		fsl,pins = <
> -			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
> -		>;
> -	};
> -};
> diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> index f8a868552707..aab646903de3 100644
> --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> @@ -15,6 +15,14 @@
>  / {
>  	model = "CompuLab SBC-iMX7";
>  	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
> +
> +	reg_usb_vbus: regulator-usb-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &usdhc1 {
> @@ -26,6 +34,11 @@
>  	status = "okay";
>  };
>  
> +&&usbotg1 {
> +	vbus-supply = <&reg_usb_vbus>;
> +	status = "okay";
> +};
> +
>  &iomuxc {
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
> -- 
> 2.23.0.rc1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: "André Draszik" <git@andred.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Igor Grinberg <grinberg@compulab.co.il>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Ilya Ledvich <ilya@compulab.co.il>,
	NXP Linux Team <linux-imx@nxp.com>
Subject: Re: [PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB
Date: Fri, 13 Sep 2019 11:31:46 +0800	[thread overview]
Message-ID: <20190913033145.GG17142@dragon> (raw)
In-Reply-To: <20190826153800.35400-1-git@andred.net>

On Mon, Aug 26, 2019 at 04:37:49PM +0100, André Draszik wrote:
> Whether and which USB port is enabled and how they
> are powered is a function of the carrier board, not
> of the SoM. Different carrier boards can have different
> ports enabled / wired up, and power them differently;
> so this should really move into the respective DTS.
> 
> Do so and update the USB power supply to reflect
> the actual situation on the sbc-imx7 carrier board.
> 
> Signed-off-by: André Draszik <git@andred.net>
> Cc: Ilya Ledvich <ilya@compulab.co.il>
> Cc: Igor Grinberg <grinberg@compulab.co.il>

Ilya, Igor, can you have a look at the series?

Shawn

> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
>  arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------
>  arch/arm/boot/dts/imx7d-sbc-imx7.dts    | 13 +++++++++++++
>  2 files changed, 13 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> index 62d5e9a4a781..6f7e85cf0c28 100644
> --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -22,15 +22,6 @@
>  		device_type = "memory";
>  		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
>  	};
> -
> -	reg_usb_otg1_vbus: regulator-vbus {
> -		compatible = "regulator-fixed";
> -		regulator-name = "usb_otg1_vbus";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> -		enable-active-high;
> -	};
>  };
>  
>  &cpu0 {
> @@ -193,13 +184,6 @@
>  	status = "okay";
>  };
>  
> -&usbotg1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_usbotg1>;
> -	vbus-supply = <&reg_usb_otg1_vbus>;
> -	status = "okay";
> -};
> -
>  &usdhc3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -278,11 +262,3 @@
>  		>;
>  	};
>  };
> -
> -&iomuxc_lpsr {
> -	pinctrl_usbotg1: usbotg1grp {
> -		fsl,pins = <
> -			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
> -		>;
> -	};
> -};
> diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> index f8a868552707..aab646903de3 100644
> --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> @@ -15,6 +15,14 @@
>  / {
>  	model = "CompuLab SBC-iMX7";
>  	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
> +
> +	reg_usb_vbus: regulator-usb-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &usdhc1 {
> @@ -26,6 +34,11 @@
>  	status = "okay";
>  };
>  
> +&&usbotg1 {
> +	vbus-supply = <&reg_usb_vbus>;
> +	status = "okay";
> +};
> +
>  &iomuxc {
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
> -- 
> 2.23.0.rc1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: "André Draszik" <git@andred.net>
Cc: linux-kernel@vger.kernel.org, Ilya Ledvich <ilya@compulab.co.il>,
	Igor Grinberg <grinberg@compulab.co.il>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB
Date: Fri, 13 Sep 2019 11:31:46 +0800	[thread overview]
Message-ID: <20190913033145.GG17142@dragon> (raw)
In-Reply-To: <20190826153800.35400-1-git@andred.net>

On Mon, Aug 26, 2019 at 04:37:49PM +0100, André Draszik wrote:
> Whether and which USB port is enabled and how they
> are powered is a function of the carrier board, not
> of the SoM. Different carrier boards can have different
> ports enabled / wired up, and power them differently;
> so this should really move into the respective DTS.
> 
> Do so and update the USB power supply to reflect
> the actual situation on the sbc-imx7 carrier board.
> 
> Signed-off-by: André Draszik <git@andred.net>
> Cc: Ilya Ledvich <ilya@compulab.co.il>
> Cc: Igor Grinberg <grinberg@compulab.co.il>

Ilya, Igor, can you have a look at the series?

Shawn

> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
>  arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------
>  arch/arm/boot/dts/imx7d-sbc-imx7.dts    | 13 +++++++++++++
>  2 files changed, 13 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> index 62d5e9a4a781..6f7e85cf0c28 100644
> --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -22,15 +22,6 @@
>  		device_type = "memory";
>  		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
>  	};
> -
> -	reg_usb_otg1_vbus: regulator-vbus {
> -		compatible = "regulator-fixed";
> -		regulator-name = "usb_otg1_vbus";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> -		enable-active-high;
> -	};
>  };
>  
>  &cpu0 {
> @@ -193,13 +184,6 @@
>  	status = "okay";
>  };
>  
> -&usbotg1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_usbotg1>;
> -	vbus-supply = <&reg_usb_otg1_vbus>;
> -	status = "okay";
> -};
> -
>  &usdhc3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -278,11 +262,3 @@
>  		>;
>  	};
>  };
> -
> -&iomuxc_lpsr {
> -	pinctrl_usbotg1: usbotg1grp {
> -		fsl,pins = <
> -			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
> -		>;
> -	};
> -};
> diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> index f8a868552707..aab646903de3 100644
> --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> @@ -15,6 +15,14 @@
>  / {
>  	model = "CompuLab SBC-iMX7";
>  	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
> +
> +	reg_usb_vbus: regulator-usb-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &usdhc1 {
> @@ -26,6 +34,11 @@
>  	status = "okay";
>  };
>  
> +&&usbotg1 {
> +	vbus-supply = <&reg_usb_vbus>;
> +	status = "okay";
> +};
> +
>  &iomuxc {
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
> -- 
> 2.23.0.rc1
> 

  parent reply	other threads:[~2019-09-13  3:32 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 15:37 [PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB André Draszik
2019-08-26 15:37 ` André Draszik
2019-08-26 15:37 ` [PATCH 02/12] ARM: dts: imx7d: cl-som-imx7: add phy-reset-gpios André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 03/12] ARM: dts: imx7d: cl-som-imx7: fix i2c2 André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 04/12] ARM: dts: imx7d: cl-som-imx7: add emmicro,em3027 RTC André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 05/12] ARM: dts: imx7d: cl-som-imx7: update pfuze3000 max voltage André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 06/12] ARM: dts: imx7d: cl-som-imx7: add / enable watchdog André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 07/12] ARM: dts: imx7d: cl-som-imx7: add/enable SPI flash on spi1 André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 08/12] ARM: dts: imx7d: cl-som-imx7: update UART1 (debug) clock André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 09/12] ARM: dts: imx7d: cl-som-imx7: add SMSC USB3503 usb hub André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 10/12] ARM: dts: imx7d: cl-som-imx7: add WiLink8 WLAN support André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:37 ` [PATCH 11/12] ARM: dts: imx7d: cl-som-imx7: add WiLink Bluetooth support André Draszik
2019-08-26 15:37   ` André Draszik
2019-08-26 15:38 ` [PATCH 12/12] ARM: dts: imx7d: sbc-iot-imx7: add basic board support André Draszik
2019-08-26 15:38   ` André Draszik
2019-08-26 20:51   ` [PATCH v2] " André Draszik
2019-08-26 20:51     ` André Draszik
2019-09-13  3:31 ` Shawn Guo [this message]
2019-09-13  3:31   ` [PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB Shawn Guo
2019-09-13  3:31   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913033145.GG17142@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=git@andred.net \
    --cc=grinberg@compulab.co.il \
    --cc=ilya@compulab.co.il \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.