All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oliver Graute <oliver.graute@gmail.com>
To: Dong Aisheng <aisheng.dong@nxp.com>
Cc: devicetree@vger.kernel.org, dongas86@gmail.com,
	catalin.marinas@arm.com, will.deacon@arm.com, robh+dt@kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, fabio.estevam@nxp.com,
	shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Fri, 13 Sep 2019 14:16:08 +0200	[thread overview]
Message-ID: <20190913121608.GD16292@optiplex> (raw)
In-Reply-To: <1568302252-28066-1-git-send-email-aisheng.dong@nxp.com>

On 12/09/19, Dong Aisheng wrote:
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
> (Subsystems), those SS may be shared between different SoCs while most of them
> can be reused like Devices Resources, Clocks, Power domains and etc.
> 
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better
> maintainability and scalability in the future.
> 
> This patch series depends on another clk new binding series:
> https://patchwork.kernel.org/cover/11046287/

Thx for your update of this patch series. I'am running into the issue
that my linux next-20190904 unfortunately is not booting with it on my
imx8QM board. Kernel is just stuck during boot see below.

I applied your v5 of your clock binding patches series and applied this
series in v3. Your former two patch series worked well with next-20190716.

The last messages from the kernel are:

[    1.019208] imx-scu scu: mbox_request_channel_byname() could not locate channel named "gip3"
[    1.027316] imx-scu scu: failed to request mbox chan gip3, ret -22
[    1.033480] imx-scu scu: failed to enable general irq channel: -22
[    1.039646] imx-scu scu: NXP i.MX SCU Initialized
[    1.047414] a35_clk: failed to get clock rate -22
[    1.058682]  lcd0-pwm0: failed to power up resource 188 ret -22
[    1.064314] imx-scu-clk: probe of pwm_clk failed with error -22
[    1.070538]  lcd0: failed to power up resource 187 ret -22
[    1.075690] imx-scu-clk: probe of lcd_clk failed with error -22
[    1.085965] mipi_csi0_core_clk: failed to attached the power domain -2
[    1.092359] mipi_csi0_esc_clk: failed to attached the power domain -2
[    1.098777] mipi_csi0_i2c0_clk: failed to attached the power domain -2
[    1.105278] mipi_csi0_pwm0_clk: failed to attached the power domain -2
[    1.115744] imx8qm-pinctrl scu:pinctrl: initialized IMX pinctrl driver
[    1.123923] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[    1.130276] gpio-mxc 5d090000.gpio: IRQ index 1 not found

I see similar messages also with your older working patches, only the
last two lines are new errors.

Best regards,

Oliver

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Oliver Graute <oliver.graute@gmail.com>
To: Dong Aisheng <aisheng.dong@nxp.com>
Cc: devicetree@vger.kernel.org, dongas86@gmail.com,
	catalin.marinas@arm.com, will.deacon@arm.com, robh+dt@kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, fabio.estevam@nxp.com,
	shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Fri, 13 Sep 2019 14:16:08 +0200	[thread overview]
Message-ID: <20190913121608.GD16292@optiplex> (raw)
In-Reply-To: <1568302252-28066-1-git-send-email-aisheng.dong@nxp.com>

On 12/09/19, Dong Aisheng wrote:
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
> (Subsystems), those SS may be shared between different SoCs while most of them
> can be reused like Devices Resources, Clocks, Power domains and etc.
> 
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better
> maintainability and scalability in the future.
> 
> This patch series depends on another clk new binding series:
> https://patchwork.kernel.org/cover/11046287/

Thx for your update of this patch series. I'am running into the issue
that my linux next-20190904 unfortunately is not booting with it on my
imx8QM board. Kernel is just stuck during boot see below.

I applied your v5 of your clock binding patches series and applied this
series in v3. Your former two patch series worked well with next-20190716.

The last messages from the kernel are:

[    1.019208] imx-scu scu: mbox_request_channel_byname() could not locate channel named "gip3"
[    1.027316] imx-scu scu: failed to request mbox chan gip3, ret -22
[    1.033480] imx-scu scu: failed to enable general irq channel: -22
[    1.039646] imx-scu scu: NXP i.MX SCU Initialized
[    1.047414] a35_clk: failed to get clock rate -22
[    1.058682]  lcd0-pwm0: failed to power up resource 188 ret -22
[    1.064314] imx-scu-clk: probe of pwm_clk failed with error -22
[    1.070538]  lcd0: failed to power up resource 187 ret -22
[    1.075690] imx-scu-clk: probe of lcd_clk failed with error -22
[    1.085965] mipi_csi0_core_clk: failed to attached the power domain -2
[    1.092359] mipi_csi0_esc_clk: failed to attached the power domain -2
[    1.098777] mipi_csi0_i2c0_clk: failed to attached the power domain -2
[    1.105278] mipi_csi0_pwm0_clk: failed to attached the power domain -2
[    1.115744] imx8qm-pinctrl scu:pinctrl: initialized IMX pinctrl driver
[    1.123923] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[    1.130276] gpio-mxc 5d090000.gpio: IRQ index 1 not found

I see similar messages also with your older working patches, only the
last two lines are new errors.

Best regards,

Oliver

  parent reply	other threads:[~2019-09-13 12:18 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-12 15:30 [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2019-09-12 15:30 ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 03/15] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 04/15] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 05/15] arm64: dts: imx8: add conn " Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 06/15] arm64: dts: imx8: add adma " Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 07/15] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 08/15] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 09/15] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 10/15] arm64: dts: imx8qm: add conn " Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 11/15] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 12/15] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 13/15] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 14/15] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 15/15] arm64: defconfig: " Dong Aisheng
2019-09-12 15:30   ` Dong Aisheng
2019-09-13 12:16 ` Oliver Graute [this message]
2019-09-13 12:16   ` [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Oliver Graute
2019-09-13 16:43   ` Aisheng Dong
2019-09-13 16:43     ` Aisheng Dong
2019-09-16 11:22     ` Oliver Graute
2019-09-16 11:22       ` Oliver Graute

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913121608.GD16292@optiplex \
    --to=oliver.graute@gmail.com \
    --cc=aisheng.dong@nxp.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dongas86@gmail.com \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.