From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>
Subject: [RFC PATCH 14/27] powerpc/64s/exception: remove the SPR saving patch code macros
Date: Sun, 15 Sep 2019 11:28:00 +1000 [thread overview]
Message-ID: <20190915012813.29317-15-npiggin@gmail.com> (raw)
In-Reply-To: <20190915012813.29317-1-npiggin@gmail.com>
These are used infrequently enough they don't provide much help, so
inline them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------
1 file changed, 28 insertions(+), 54 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 716a95ba814f..abf26db36427 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -110,46 +110,6 @@ name:
#define EXC_HV 1
#define EXC_STD 0
-/*
- * PPR save/restore macros used in exceptions-64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra) \
-BEGIN_FTR_SECTION_NESTED(940) \
- ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \
- std ra,_PPR(r1); \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra) \
-BEGIN_FTR_SECTION_NESTED(941) \
- ld ra,area+EX_PPR(r13); \
- mtspr SPRN_PPR,ra; \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mfspr ra,spr; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mtspr spr,ra; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- std ra,offset(r13); \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
/*
* Branch to label using its 0xC000 address. This results in instruction
* address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n
cmpwi r10,KVM_GUEST_MODE_SKIP
beq 89f
.else
-BEGIN_FTR_SECTION_NESTED(947)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
.endif
ld r10,PACA_EXGEN+EX_CTR(r13)
mtctr r10
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_PPR(r13)
std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r11,IAREA+EX_R11(r13)
ld r12,IAREA+EX_R12(r13)
std r12,HSTATE_SCRATCH0(r13)
@@ -386,10 +346,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
SET_SCRATCH0(r13) /* save r13 */
GET_PACA(r13)
std r9,IAREA+EX_R9(r13) /* save r9 */
- OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+ mfspr r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
HMT_MEDIUM
std r10,IAREA+EX_R10(r13) /* save r10 - r12 */
- OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
.if \ool
.if !\virt
b tramp_real_\name
@@ -402,8 +366,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
.endif
.endif
- OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR)
- OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ std r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+ std r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
INTERRUPT_TO_KERNEL
mfctr r10
std r10,IAREA+EX_CTR(r13)
@@ -558,7 +526,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
.endif
beq 101f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
- SAVE_PPR(IAREA, r9)
+BEGIN_FTR_SECTION
+ ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */
+ std r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
101:
.else
.if IKUAP
@@ -598,10 +569,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
std r10,_DSISR(r1)
.endif
-BEGIN_FTR_SECTION_NESTED(66)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,ORIG_GPR3(r1)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r10,IAREA+EX_CTR(r13)
std r10,_CTR(r1)
std r2,GPR2(r1) /* save r2 in stackframe */
@@ -1696,10 +1667,10 @@ TRAMP_REAL_BEGIN(system_call_kvm)
* HMT_MEDIUM. That allows the KVM code to save that value into the
* guest state (it is the guest's PPR value).
*/
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
mfspr r10,SPRN_PPR
std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
HMT_MEDIUM
mfctr r10
SET_SCRATCH0(r10)
@@ -2254,7 +2225,10 @@ denorm_done:
mtspr SPRN_HSRR0,r11
mtcrf 0x80,r9
ld r9,PACA_EXGEN+EX_R9(r13)
- RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+ ld r10,PACA_EXGEN+EX_PPR(r13)
+ mtspr SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
BEGIN_FTR_SECTION
ld r10,PACA_EXGEN+EX_CFAR(r13)
mtspr SPRN_CFAR,r10
--
2.23.0
next prev parent reply other threads:[~2019-09-15 1:57 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-15 1:27 [RFC PATCH 00/27] current interrupt series plus scv syscall Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 01/27] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 02/27] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 03/27] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 04/27] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 05/27] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 06/27] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 07/27] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 08/27] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 09/27] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 10/27] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 11/27] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 12/27] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 13/27] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-15 1:28 ` Nicholas Piggin [this message]
2019-09-15 1:28 ` [RFC PATCH 15/27] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 16/27] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 17/27] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 18/27] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 19/27] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 20/27] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 21/27] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 22/27] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 23/27] powerpc/64: system call implement the bulk of the logic in C Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 3:10 ` Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 24/27] powerpc/64s: interrupt return " Nicholas Piggin
2019-10-02 8:20 ` Michal Suchánek
2019-09-15 1:28 ` [RFC PATCH 25/27] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 26/27] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 27/27] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 8:20 ` [RFC PATCH 00/27] current interrupt series plus scv syscall Michal Suchánek
2019-10-02 3:13 ` Nicholas Piggin
2019-10-30 12:55 ` Michal Suchánek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190915012813.29317-15-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=tuliom@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.