From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>
Subject: [RFC PATCH 07/27] powerpc/64s/exception: Remove old INT_COMMON macro
Date: Sun, 15 Sep 2019 11:27:53 +1000 [thread overview]
Message-ID: <20190915012813.29317-8-npiggin@gmail.com> (raw)
In-Reply-To: <20190915012813.29317-1-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 51 +++++++++++++---------------
1 file changed, 24 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index ba2dcd91aaaf..f318869607db 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -591,8 +591,8 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
* If stack=0, then the stack is already set in r1, and r1 is saved in r10.
* PPR save and CPU accounting is not done for the !stack case (XXX why not?)
*/
-.macro INT_COMMON vec, area, stack, kaup, reconcile, dar, dsisr
- .if \stack
+.macro GEN_COMMON name
+ .if ISTACK
andi. r10,r12,MSR_PR /* See if coming from user */
mr r10,r1 /* Save r1 */
subi r1,r1,INT_FRAME_SIZE /* alloc frame on kernel stack */
@@ -609,54 +609,54 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
std r0,GPR0(r1) /* save r0 in stackframe */
std r10,GPR1(r1) /* save r1 in stackframe */
- .if \stack
- .if \kaup
+ .if ISTACK
+ .if IKUAP
kuap_save_amr_and_lock r9, r10, cr1, cr0
.endif
beq 101f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
- SAVE_PPR(\area, r9)
+ SAVE_PPR(IAREA, r9)
101:
.else
- .if \kaup
+ .if IKUAP
kuap_save_amr_and_lock r9, r10, cr1
.endif
.endif
/* Save original regs values from save area to stack frame. */
- ld r9,\area+EX_R9(r13) /* move r9, r10 to stackframe */
- ld r10,\area+EX_R10(r13)
+ ld r9,IAREA+EX_R9(r13) /* move r9, r10 to stackframe */
+ ld r10,IAREA+EX_R10(r13)
std r9,GPR9(r1)
std r10,GPR10(r1)
- ld r9,\area+EX_R11(r13) /* move r11 - r13 to stackframe */
- ld r10,\area+EX_R12(r13)
- ld r11,\area+EX_R13(r13)
+ ld r9,IAREA+EX_R11(r13) /* move r11 - r13 to stackframe */
+ ld r10,IAREA+EX_R12(r13)
+ ld r11,IAREA+EX_R13(r13)
std r9,GPR11(r1)
std r10,GPR12(r1)
std r11,GPR13(r1)
- .if \dar
- .if \dar == 2
+ .if IDAR
+ .if IDAR == 2
ld r10,_NIP(r1)
.else
- ld r10,\area+EX_DAR(r13)
+ ld r10,IAREA+EX_DAR(r13)
.endif
std r10,_DAR(r1)
.endif
- .if \dsisr
- .if \dsisr == 2
+ .if IDSISR
+ .if IDSISR == 2
ld r10,_MSR(r1)
lis r11,DSISR_SRR1_MATCH_64S@h
and r10,r10,r11
.else
- lwz r10,\area+EX_DSISR(r13)
+ lwz r10,IAREA+EX_DSISR(r13)
.endif
std r10,_DSISR(r1)
.endif
BEGIN_FTR_SECTION_NESTED(66)
- ld r10,\area+EX_CFAR(r13)
+ ld r10,IAREA+EX_CFAR(r13)
std r10,ORIG_GPR3(r1)
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
- GET_CTR(r10, \area)
+ GET_CTR(r10, IAREA)
std r10,_CTR(r1)
std r2,GPR2(r1) /* save r2 in stackframe */
SAVE_4GPRS(3, r1) /* save r3 - r6 in stackframe */
@@ -668,26 +668,22 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
mfspr r11,SPRN_XER /* save XER in stackframe */
std r10,SOFTE(r1)
std r11,_XER(r1)
- li r9,(\vec)+1
+ li r9,(IVEC)+1
std r9,_TRAP(r1) /* set trap number */
li r10,0
ld r11,exception_marker@toc(r2)
std r10,RESULT(r1) /* clear regs->result */
std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */
- .if \stack
+ .if ISTACK
ACCOUNT_STOLEN_TIME
.endif
- .if \reconcile
+ .if IRECONCILE
RECONCILE_IRQ_STATE(r10, r11)
.endif
.endm
-.macro GEN_COMMON name
- INT_COMMON IVEC, IAREA, ISTACK, IKUAP, IRECONCILE, IDAR, IDSISR
-.endm
-
/*
* Restore all registers including H/SRR0/1 saved in a stack frame of a
* standard exception.
@@ -2400,7 +2396,8 @@ EXC_COMMON_BEGIN(soft_nmi_common)
mr r10,r1
ld r1,PACAEMERGSP(r13)
subi r1,r1,INT_FRAME_SIZE
- INT_COMMON 0x900, PACA_EXGEN, 0, 1, 1, 0, 0
+ __ISTACK(decrementer)=0
+ GEN_COMMON decrementer
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl soft_nmi_interrupt
--
2.23.0
next prev parent reply other threads:[~2019-09-15 1:43 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-15 1:27 [RFC PATCH 00/27] current interrupt series plus scv syscall Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 01/27] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 02/27] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 03/27] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 04/27] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 05/27] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 06/27] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-15 1:27 ` Nicholas Piggin [this message]
2019-09-15 1:27 ` [RFC PATCH 08/27] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 09/27] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 10/27] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 11/27] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 12/27] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 13/27] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 14/27] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 15/27] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 16/27] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 17/27] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 18/27] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 19/27] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 20/27] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 21/27] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 22/27] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 23/27] powerpc/64: system call implement the bulk of the logic in C Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 3:10 ` Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 24/27] powerpc/64s: interrupt return " Nicholas Piggin
2019-10-02 8:20 ` Michal Suchánek
2019-09-15 1:28 ` [RFC PATCH 25/27] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 26/27] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 27/27] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 8:20 ` [RFC PATCH 00/27] current interrupt series plus scv syscall Michal Suchánek
2019-10-02 3:13 ` Nicholas Piggin
2019-10-30 12:55 ` Michal Suchánek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190915012813.29317-8-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=tuliom@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.