From: Vinod Koul <vkoul@kernel.org>
To: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] clk: qcom: gcc: Add missing clocks in SM8150
Date: Tue, 17 Sep 2019 14:46:23 +0530 [thread overview]
Message-ID: <20190917091623.3453-1-vkoul@kernel.org> (raw)
The initial upstreaming of SM8150 GCC driver missed few clock so add
them up now.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/clk/qcom/gcc-sm8150.c | 172 ++++++++++++++++++++++++++++++++++
1 file changed, 172 insertions(+)
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 12ca2d14797f..13d4d14a5744 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -1616,6 +1616,38 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
},
};
+static struct clk_branch gcc_gpu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(16),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gpu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_gpu_iref_clk = {
.halt_reg = 0x8c010,
.halt_check = BRANCH_HALT,
@@ -1698,6 +1730,38 @@ static struct clk_branch gcc_npu_cfg_ahb_clk = {
},
};
+static struct clk_branch gcc_npu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(18),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(19),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_npu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_npu_trig_clk = {
.halt_reg = 0x4d00c,
.halt_check = BRANCH_VOTED,
@@ -2812,6 +2876,42 @@ static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = {
},
};
+static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x7501c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_rx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x750ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_rx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x75018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_tx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_card_unipro_core_clk = {
.halt_reg = 0x75058,
.halt_check = BRANCH_HALT,
@@ -2992,6 +3092,42 @@ static struct clk_branch gcc_ufs_phy_phy_aux_hw_ctl_clk = {
},
};
+static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x7701c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_rx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x770ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_rx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x77018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_tx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
.halt_reg = 0x77058,
.halt_check = BRANCH_HALT,
@@ -3171,6 +3307,18 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
},
};
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0xf058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_phy_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb3_sec_clkref_clk = {
.halt_reg = 0x8c028,
.halt_check = BRANCH_HALT,
@@ -3201,6 +3349,18 @@ static struct clk_branch gcc_usb3_sec_phy_aux_clk = {
},
};
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x10058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_phy_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
.halt_reg = 0x10054,
.halt_check = BRANCH_HALT,
@@ -3332,12 +3492,16 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
[GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
+ [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
+ [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
[GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
[GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr,
[GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
[GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+ [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
+ [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
[GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr,
[GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
[GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
@@ -3442,6 +3606,9 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
[GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] =
&gcc_ufs_card_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr,
+ [GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr,
+ [GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr,
[GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
[GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
&gcc_ufs_card_unipro_core_clk_src.clkr,
@@ -3459,6 +3626,9 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
[GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
[GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr,
+ [GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr,
+ [GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr,
[GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
[GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
&gcc_ufs_phy_unipro_core_clk_src.clkr,
@@ -3480,10 +3650,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+ [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
[GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+ [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
[GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
--
2.20.1
next reply other threads:[~2019-09-17 9:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 9:16 Vinod Koul [this message]
2019-09-17 16:09 ` [PATCH] clk: qcom: gcc: Add missing clocks in SM8150 Stephen Boyd
2019-10-16 12:23 ` Vinod Koul
2019-10-17 17:48 ` Stephen Boyd
2019-10-21 10:54 ` Vinod Koul
2019-10-27 21:25 ` Stephen Boyd
2019-10-28 7:23 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917091623.3453-1-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.