From: Krzysztof Kozlowski <krzk@kernel.org>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-samsung-soc@vger.kernel.org, ckeepax@opensource.cirrus.com,
b.zolnierkie@samsung.com, sbkim73@samsung.com,
patches@opensource.cirrus.com, lgirdwood@gmail.com,
robh+dt@kernel.org, broonie@kernel.org,
linux-arm-kernel@lists.infradead.org, m.szyprowski@samsung.com
Subject: Re: [alsa-devel] [PATCH v1 9/9] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
Date: Thu, 19 Sep 2019 10:26:21 +0200 [thread overview]
Message-ID: <20190919082621.GG13195@pi3> (raw)
In-Reply-To: <20190918104634.15216-10-s.nawrocki@samsung.com>
On Wed, Sep 18, 2019 at 12:46:34PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daugther board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index dc6fa6fe83f1..62aa6720aa88 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -11,6 +11,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/sound/samsung-i2s.h>
> #include "exynos5250.dtsi"
>
> / {
> @@ -135,6 +136,12 @@
> };
> };
>
> + sound {
> + compatible = "samsung,arndale-wm1811";
> + samsung,audio-cpu = <&i2s0>;
> + samsung,audio-codec = <&wm1811>;
> + };
> +
> fixed-rate-clocks {
> xxti {
> compatible = "samsung,clock-xxti";
> @@ -499,12 +506,24 @@
> };
> };
>
> +&clock {
> + assigned-clocks = <&clock CLK_FOUT_EPLL>;
> + assigned-clock-rates = <49152000>;
> +};
> +
> +&clock_audss {
> + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
> + assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
> +};
Put them before "cpu" so alphabetical order is preserved.
Best regards,
Krzysztof
> +
> &i2c_3 {
> status = "okay";
>
> - wm1811a@1a {
> + wm1811: codec@1a {
> compatible = "wlf,wm1811";
> reg = <0x1a>;
> + clocks = <&i2s0 CLK_I2S_CDCLK>;
> + clock-names = "MCLK1";
>
> AVDD2-supply = <&main_dc_reg>;
> CPVDD-supply = <&main_dc_reg>;
> @@ -540,9 +559,15 @@
> };
>
> &i2s0 {
> + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
> + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
> status = "okay";
> };
>
> +&i2s0_bus {
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
> +};
> +
> &mixer {
> status = "okay";
> };
> --
> 2.17.1
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-samsung-soc@vger.kernel.org, ckeepax@opensource.cirrus.com,
b.zolnierkie@samsung.com, sbkim73@samsung.com,
patches@opensource.cirrus.com, lgirdwood@gmail.com,
robh+dt@kernel.org, broonie@kernel.org,
linux-arm-kernel@lists.infradead.org, m.szyprowski@samsung.com
Subject: Re: [PATCH v1 9/9] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
Date: Thu, 19 Sep 2019 10:26:21 +0200 [thread overview]
Message-ID: <20190919082621.GG13195@pi3> (raw)
In-Reply-To: <20190918104634.15216-10-s.nawrocki@samsung.com>
On Wed, Sep 18, 2019 at 12:46:34PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daugther board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index dc6fa6fe83f1..62aa6720aa88 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -11,6 +11,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/sound/samsung-i2s.h>
> #include "exynos5250.dtsi"
>
> / {
> @@ -135,6 +136,12 @@
> };
> };
>
> + sound {
> + compatible = "samsung,arndale-wm1811";
> + samsung,audio-cpu = <&i2s0>;
> + samsung,audio-codec = <&wm1811>;
> + };
> +
> fixed-rate-clocks {
> xxti {
> compatible = "samsung,clock-xxti";
> @@ -499,12 +506,24 @@
> };
> };
>
> +&clock {
> + assigned-clocks = <&clock CLK_FOUT_EPLL>;
> + assigned-clock-rates = <49152000>;
> +};
> +
> +&clock_audss {
> + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
> + assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
> +};
Put them before "cpu" so alphabetical order is preserved.
Best regards,
Krzysztof
> +
> &i2c_3 {
> status = "okay";
>
> - wm1811a@1a {
> + wm1811: codec@1a {
> compatible = "wlf,wm1811";
> reg = <0x1a>;
> + clocks = <&i2s0 CLK_I2S_CDCLK>;
> + clock-names = "MCLK1";
>
> AVDD2-supply = <&main_dc_reg>;
> CPVDD-supply = <&main_dc_reg>;
> @@ -540,9 +559,15 @@
> };
>
> &i2s0 {
> + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
> + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
> status = "okay";
> };
>
> +&i2s0_bus {
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
> +};
> +
> &mixer {
> status = "okay";
> };
> --
> 2.17.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-samsung-soc@vger.kernel.org, ckeepax@opensource.cirrus.com,
b.zolnierkie@samsung.com, sbkim73@samsung.com,
patches@opensource.cirrus.com, lgirdwood@gmail.com,
robh+dt@kernel.org, broonie@kernel.org,
linux-arm-kernel@lists.infradead.org, m.szyprowski@samsung.com
Subject: Re: [PATCH v1 9/9] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
Date: Thu, 19 Sep 2019 10:26:21 +0200 [thread overview]
Message-ID: <20190919082621.GG13195@pi3> (raw)
In-Reply-To: <20190918104634.15216-10-s.nawrocki@samsung.com>
On Wed, Sep 18, 2019 at 12:46:34PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daugther board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index dc6fa6fe83f1..62aa6720aa88 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -11,6 +11,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/sound/samsung-i2s.h>
> #include "exynos5250.dtsi"
>
> / {
> @@ -135,6 +136,12 @@
> };
> };
>
> + sound {
> + compatible = "samsung,arndale-wm1811";
> + samsung,audio-cpu = <&i2s0>;
> + samsung,audio-codec = <&wm1811>;
> + };
> +
> fixed-rate-clocks {
> xxti {
> compatible = "samsung,clock-xxti";
> @@ -499,12 +506,24 @@
> };
> };
>
> +&clock {
> + assigned-clocks = <&clock CLK_FOUT_EPLL>;
> + assigned-clock-rates = <49152000>;
> +};
> +
> +&clock_audss {
> + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
> + assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
> +};
Put them before "cpu" so alphabetical order is preserved.
Best regards,
Krzysztof
> +
> &i2c_3 {
> status = "okay";
>
> - wm1811a@1a {
> + wm1811: codec@1a {
> compatible = "wlf,wm1811";
> reg = <0x1a>;
> + clocks = <&i2s0 CLK_I2S_CDCLK>;
> + clock-names = "MCLK1";
>
> AVDD2-supply = <&main_dc_reg>;
> CPVDD-supply = <&main_dc_reg>;
> @@ -540,9 +559,15 @@
> };
>
> &i2s0 {
> + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
> + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
> status = "okay";
> };
>
> +&i2s0_bus {
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
> +};
> +
> &mixer {
> status = "okay";
> };
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-19 8:27 UTC|newest]
Thread overview: 109+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190918104650eucas1p2288b0b7e8081e872c4f181cb5ca8ba0d@eucas1p2.samsung.com>
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 0/9] Basic sound support for Arndale board / wm8994 updates Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 1/9] ASoC: wm8994: Do not register inapplicable controls for WM1811 Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 12:51 ` [alsa-devel] " Charles Keepax
2019-09-18 12:51 ` Charles Keepax
2019-09-18 12:51 ` Charles Keepax
2019-09-19 7:38 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 7:38 ` Krzysztof Kozlowski
2019-09-19 7:38 ` Krzysztof Kozlowski
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 2/9] mfd: wm8994: Add support for MCLKn clock control Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:59 ` [alsa-devel] " Sylwester Nawrocki
2019-09-18 10:59 ` Sylwester Nawrocki
2019-09-18 10:59 ` Sylwester Nawrocki
2019-09-18 12:54 ` [alsa-devel] " Charles Keepax
2019-09-18 12:54 ` Charles Keepax
2019-09-18 12:54 ` Charles Keepax
2019-09-18 13:36 ` [alsa-devel] " Sylwester Nawrocki
2019-09-18 13:36 ` Sylwester Nawrocki
2019-09-18 13:36 ` Sylwester Nawrocki
2019-09-19 7:59 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 7:59 ` Krzysztof Kozlowski
2019-09-19 7:59 ` Krzysztof Kozlowski
2019-09-19 12:48 ` [alsa-devel] " Sylwester Nawrocki
2019-09-19 12:48 ` Sylwester Nawrocki
2019-09-19 12:48 ` Sylwester Nawrocki
2019-09-19 13:07 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 13:07 ` Krzysztof Kozlowski
2019-09-19 13:07 ` Krzysztof Kozlowski
2019-09-19 12:50 ` [alsa-devel] " Mark Brown
2019-09-19 12:50 ` Mark Brown
2019-09-19 14:31 ` [alsa-devel] " Charles Keepax
2019-09-19 14:31 ` Charles Keepax
2019-09-19 14:31 ` Charles Keepax
2019-09-19 14:33 ` [alsa-devel] " Mark Brown
2019-09-19 14:33 ` Mark Brown
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 3/9] ASoC: wm8994: Add support for setting MCLKn clock rate Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 13:51 ` [alsa-devel] " Charles Keepax
2019-09-18 13:51 ` Charles Keepax
2019-09-18 13:51 ` Charles Keepax
2019-09-19 8:00 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 8:00 ` Krzysztof Kozlowski
2019-09-19 8:00 ` Krzysztof Kozlowski
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 4/9] ASoC: wm8994: Add support for MCLKn clock gating Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 14:31 ` [alsa-devel] " Charles Keepax
2019-09-18 14:31 ` Charles Keepax
2019-09-18 14:31 ` Charles Keepax
2019-09-19 11:58 ` [alsa-devel] " Sylwester Nawrocki
2019-09-19 11:58 ` Sylwester Nawrocki
2019-09-19 11:58 ` Sylwester Nawrocki
2019-09-19 14:33 ` [alsa-devel] " Charles Keepax
2019-09-19 14:33 ` Charles Keepax
2019-09-19 14:33 ` Charles Keepax
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 5/9] ASoC: samsung: arndale: Simplify DAI link initialization Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 14:33 ` [alsa-devel] " Charles Keepax
2019-09-18 14:33 ` Charles Keepax
2019-09-18 14:33 ` Charles Keepax
2019-09-19 8:01 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 8:01 ` Krzysztof Kozlowski
2019-09-19 8:01 ` Krzysztof Kozlowski
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 6/9] ASoC: dt-bindings: Document "samsung, arndale-wm1811" compatible Sylwester Nawrocki
2019-09-18 10:46 ` [PATCH v1 6/9] ASoC: dt-bindings: Document "samsung,arndale-wm1811" compatible Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-19 8:02 ` [alsa-devel] [PATCH v1 6/9] ASoC: dt-bindings: Document "samsung, arndale-wm1811" compatible Krzysztof Kozlowski
2019-09-19 8:02 ` [PATCH v1 6/9] ASoC: dt-bindings: Document "samsung,arndale-wm1811" compatible Krzysztof Kozlowski
2019-09-19 8:02 ` Krzysztof Kozlowski
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 7/9] ASoC: samsung: arndale: Add support for WM1811 CODEC Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 14:45 ` [alsa-devel] " Charles Keepax
2019-09-18 14:45 ` Charles Keepax
2019-09-18 14:45 ` Charles Keepax
2019-09-19 12:00 ` [alsa-devel] " Sylwester Nawrocki
2019-09-19 12:00 ` Sylwester Nawrocki
2019-09-19 12:00 ` Sylwester Nawrocki
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 8/9] ASoC: samsung: arndale: Add missing OF node dereferencing Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 14:51 ` [alsa-devel] " Charles Keepax
2019-09-18 14:51 ` Charles Keepax
2019-09-18 14:51 ` Charles Keepax
2019-09-19 8:22 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 8:22 ` Krzysztof Kozlowski
2019-09-19 8:22 ` Krzysztof Kozlowski
2019-09-19 12:49 ` [alsa-devel] " Sylwester Nawrocki
2019-09-19 12:49 ` Sylwester Nawrocki
2019-09-19 12:49 ` Sylwester Nawrocki
2019-09-19 12:58 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-19 12:58 ` Krzysztof Kozlowski
2019-09-19 12:58 ` Krzysztof Kozlowski
2019-09-19 13:31 ` [alsa-devel] " Sylwester Nawrocki
2019-09-19 13:31 ` Sylwester Nawrocki
2019-09-19 13:31 ` Sylwester Nawrocki
2019-09-18 10:46 ` [alsa-devel] [PATCH v1 9/9] ARM: dts: arndale: Add audio support (WM1811 CODEC boards) Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-18 10:46 ` Sylwester Nawrocki
2019-09-19 8:26 ` Krzysztof Kozlowski [this message]
2019-09-19 8:26 ` Krzysztof Kozlowski
2019-09-19 8:26 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919082621.GG13195@pi3 \
--to=krzk@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=patches@opensource.cirrus.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.