All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Greg KH <greg@kroah.com>
Cc: Tokunori Ikegami <ikegami.t@gmail.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Hauke Mehrtens <hauke@hauke-m.de>,
	stable@vger.kernel.org,
	Joakim Tjernlund <Joakim.Tjernlund@infinera.com>,
	Chris Packham <chris.packham@alliedtelesis.co.nz>,
	linux-mtd@lists.infradead.org, Felix Fietkau <nbd@nbd.name>
Subject: [PATCH for 5.2.y] mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()
Date: Mon, 23 Sep 2019 11:32:51 +0900	[thread overview]
Message-ID: <20190923023251.20180-1-ikegami.t@gmail.com> (raw)

As reported by the OpenWRT team, write requests sometimes fail on some
platforms.
Currently to check the state chip_ready() is used correctly as described by
the flash memory S29GL256P11TFI01 datasheet.
Also chip_good() is used to check if the write is succeeded and it was
implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error
checking").
But actually the write failure is caused on some platforms and also it can
be fixed by using chip_good() to check the state and retry instead.
Also it seems that it is caused after repeated about 1,000 times to retry
the write one word with the reset command.
By using chip_good() to check the state to be done it can be reduced the
retry with reset.
It is depended on the actual flash chip behavior so the root cause is
unknown.

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Reported-by: Fabio Bettoni <fbettoni@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
[vigneshr@ti.com: Fix a checkpatch warning]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 drivers/mtd/chips/cfi_cmdset_0002.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index c8fa5906bdf9..ed3e640eb03a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1628,29 +1628,35 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 			continue;
 		}
 
-		if (time_after(jiffies, timeo) && !chip_ready(map, adr)){
+		/*
+		 * We check "time_after" and "!chip_good" before checking
+		 * "chip_good" to avoid the failure due to scheduling.
+		 */
+		if (time_after(jiffies, timeo) && !chip_good(map, adr, datum)) {
 			xip_enable(map, chip, adr);
 			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
 			xip_disable(map, chip, adr);
+			ret = -EIO;
 			break;
 		}
 
-		if (chip_ready(map, adr))
+		if (chip_good(map, adr, datum))
 			break;
 
 		/* Latency issues. Drop the lock, wait a while and retry */
 		UDELAY(map, chip, adr, 1);
 	}
+
 	/* Did we succeed? */
-	if (!chip_good(map, adr, datum)) {
+	if (ret) {
 		/* reset on all failures. */
 		map_write(map, CMD(0xF0), chip->start);
 		/* FIXME - should have reset delay before continuing */
 
-		if (++retry_cnt <= MAX_RETRIES)
+		if (++retry_cnt <= MAX_RETRIES) {
+			ret = 0;
 			goto retry;
-
-		ret = -EIO;
+		}
 	}
 	xip_enable(map, chip, adr);
  op_done:
-- 
2.11.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Greg KH <greg@kroah.com>
Cc: Tokunori Ikegami <ikegami.t@gmail.com>,
	Chris Packham <chris.packham@alliedtelesis.co.nz>,
	Joakim Tjernlund <Joakim.Tjernlund@infinera.com>,
	linux-mtd@lists.infradead.org, stable@vger.kernel.org,
	Felix Fietkau <nbd@nbd.name>, Hauke Mehrtens <hauke@hauke-m.de>,
	Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH for 5.2.y] mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()
Date: Mon, 23 Sep 2019 11:32:51 +0900	[thread overview]
Message-ID: <20190923023251.20180-1-ikegami.t@gmail.com> (raw)

As reported by the OpenWRT team, write requests sometimes fail on some
platforms.
Currently to check the state chip_ready() is used correctly as described by
the flash memory S29GL256P11TFI01 datasheet.
Also chip_good() is used to check if the write is succeeded and it was
implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error
checking").
But actually the write failure is caused on some platforms and also it can
be fixed by using chip_good() to check the state and retry instead.
Also it seems that it is caused after repeated about 1,000 times to retry
the write one word with the reset command.
By using chip_good() to check the state to be done it can be reduced the
retry with reset.
It is depended on the actual flash chip behavior so the root cause is
unknown.

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Reported-by: Fabio Bettoni <fbettoni@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
[vigneshr@ti.com: Fix a checkpatch warning]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 drivers/mtd/chips/cfi_cmdset_0002.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index c8fa5906bdf9..ed3e640eb03a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1628,29 +1628,35 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 			continue;
 		}
 
-		if (time_after(jiffies, timeo) && !chip_ready(map, adr)){
+		/*
+		 * We check "time_after" and "!chip_good" before checking
+		 * "chip_good" to avoid the failure due to scheduling.
+		 */
+		if (time_after(jiffies, timeo) && !chip_good(map, adr, datum)) {
 			xip_enable(map, chip, adr);
 			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
 			xip_disable(map, chip, adr);
+			ret = -EIO;
 			break;
 		}
 
-		if (chip_ready(map, adr))
+		if (chip_good(map, adr, datum))
 			break;
 
 		/* Latency issues. Drop the lock, wait a while and retry */
 		UDELAY(map, chip, adr, 1);
 	}
+
 	/* Did we succeed? */
-	if (!chip_good(map, adr, datum)) {
+	if (ret) {
 		/* reset on all failures. */
 		map_write(map, CMD(0xF0), chip->start);
 		/* FIXME - should have reset delay before continuing */
 
-		if (++retry_cnt <= MAX_RETRIES)
+		if (++retry_cnt <= MAX_RETRIES) {
+			ret = 0;
 			goto retry;
-
-		ret = -EIO;
+		}
 	}
 	xip_enable(map, chip, adr);
  op_done:
-- 
2.11.0


             reply	other threads:[~2019-09-23  2:33 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23  2:32 Tokunori Ikegami [this message]
2019-09-23  2:32 ` [PATCH for 5.2.y] mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword() Tokunori Ikegami
2019-09-23  7:13 ` Greg KH
2019-09-23  7:13   ` Greg KH
  -- strict thread matches above, loose matches on Subject: below --
2019-09-17 17:50 Tokunori Ikegami
2019-09-17 17:50 ` Tokunori Ikegami
2019-09-17 18:11 ` Greg KH
2019-09-17 18:11   ` Greg KH
2019-09-17 22:32   ` Tokunori Ikegami
2019-09-17 22:32     ` Tokunori Ikegami
2019-09-18  5:52     ` Greg KH
2019-09-18  5:52       ` Greg KH
2019-09-18 13:59       ` Tokunori Ikegami
2019-09-18 13:59         ` Tokunori Ikegami

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190923023251.20180-1-ikegami.t@gmail.com \
    --to=ikegami.t@gmail.com \
    --cc=Joakim.Tjernlund@infinera.com \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=greg@kroah.com \
    --cc=hauke@hauke-m.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=nbd@nbd.name \
    --cc=stable@vger.kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.