From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Jason Cooper <jason@lakedaemon.net>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 00/35] irqchip/gic-v4: GICv4.1 architecture support
Date: Mon, 23 Sep 2019 19:25:31 +0100 [thread overview]
Message-ID: <20190923182606.32100-1-maz@kernel.org> (raw)
[Apologies for posting this during the merge window, I'm fighting against
another deadline which is incompatible with the -rc1 time frame]
This rather long series expands the existing GICv4 support to deal with the
new GICv4.1 architecture, which comes with a set of major improvements
compared to v4.0:
- One architectural doorbell per vcpu, instead of one doorbell per VLPI
- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor
- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)
- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care)
On the other hand, public documentation is not available yet, so that's a
bit annoying..
The series is roughly organised in 5 parts:
(1) A bunch of reworks to make the checking of some features more
straightforward,
(2) VPE table allocation, new flavours of VMAPP/VMOVP commands
(3) v4.1 doorbell management
(4) Virtual SGI support
(5) Plumbing of virtual SGIs in KVM
Note that patch #1 has been previously posted, and forms the base of this
work. This has had *very little* testing on a fairly early model, and some
behaviours are unexpected (the VSGI feature clearly misbehaves). But it is
in a shape that should make it possible to review and even debug. Consider
this an opportunity to influence the shape of this code at an early stage!
;-)
Marc Zyngier (35):
KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by
vcpu_load/put
irqchip/gic-v3-its: Factor out wait_for_syncr primitive
irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface
irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
irqchip/gic-v3: Add GICv4.1 VPEID size discovery
irqchip/gic-v3-its: Make is_v4 use a TYPER copy
irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead
irqchip/gic-v3-its: Kill its->device_ids and use TYPER copy instead
irqchip/gic-v3-its: Add get_vlpi_map() helper
irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
irqchip/gic-v4.1: Plumb skeletal VPE irqchip
irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
irqchip/gic-v4.1: Add VPE residency callback
irqchip/gic-v4.1: Add VPE eviction callback
irqchip/gic-v4.1: Add VPE INVALL callback
irqchip/gic-v4.1: Suppress per-VLPI doorbell
irqchip/gic-v4.1: Allow direct invalidation of VLPIs
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Configure SGIs as HW interrupts
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
arch/arm/include/asm/arch_gicv3.h | 2 +
arch/arm64/include/asm/arch_gicv3.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 1099 +++++++++++++++++++++---
drivers/irqchip/irq-gic-v3.c | 25 +-
drivers/irqchip/irq-gic-v4.c | 143 ++-
include/kvm/arm_vgic.h | 5 +-
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 75 +-
include/linux/irqchip/arm-gic-v4.h | 45 +-
virt/kvm/arm/arm.c | 12 +-
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 15 +-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +-
virt/kvm/arm/vgic/vgic-v3.c | 5 +
virt/kvm/arm/vgic/vgic-v4.c | 106 ++-
virt/kvm/arm/vgic/vgic.c | 4 -
virt/kvm/arm/vgic/vgic.h | 2 -
17 files changed, 1466 insertions(+), 177 deletions(-)
--
2.20.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Eric Auger <eric.auger@redhat.com>,
James Morse <james.morse@arm.com>,
Julien Thierry <julien.thierry.kdev@gmail.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <Andrew.Murray@arm.com>
Subject: [PATCH 00/35] irqchip/gic-v4: GICv4.1 architecture support
Date: Mon, 23 Sep 2019 19:25:31 +0100 [thread overview]
Message-ID: <20190923182606.32100-1-maz@kernel.org> (raw)
[Apologies for posting this during the merge window, I'm fighting against
another deadline which is incompatible with the -rc1 time frame]
This rather long series expands the existing GICv4 support to deal with the
new GICv4.1 architecture, which comes with a set of major improvements
compared to v4.0:
- One architectural doorbell per vcpu, instead of one doorbell per VLPI
- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor
- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)
- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care)
On the other hand, public documentation is not available yet, so that's a
bit annoying..
The series is roughly organised in 5 parts:
(1) A bunch of reworks to make the checking of some features more
straightforward,
(2) VPE table allocation, new flavours of VMAPP/VMOVP commands
(3) v4.1 doorbell management
(4) Virtual SGI support
(5) Plumbing of virtual SGIs in KVM
Note that patch #1 has been previously posted, and forms the base of this
work. This has had *very little* testing on a fairly early model, and some
behaviours are unexpected (the VSGI feature clearly misbehaves). But it is
in a shape that should make it possible to review and even debug. Consider
this an opportunity to influence the shape of this code at an early stage!
;-)
Marc Zyngier (35):
KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by
vcpu_load/put
irqchip/gic-v3-its: Factor out wait_for_syncr primitive
irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface
irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
irqchip/gic-v3: Add GICv4.1 VPEID size discovery
irqchip/gic-v3-its: Make is_v4 use a TYPER copy
irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead
irqchip/gic-v3-its: Kill its->device_ids and use TYPER copy instead
irqchip/gic-v3-its: Add get_vlpi_map() helper
irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
irqchip/gic-v4.1: Plumb skeletal VPE irqchip
irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
irqchip/gic-v4.1: Add VPE residency callback
irqchip/gic-v4.1: Add VPE eviction callback
irqchip/gic-v4.1: Add VPE INVALL callback
irqchip/gic-v4.1: Suppress per-VLPI doorbell
irqchip/gic-v4.1: Allow direct invalidation of VLPIs
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Configure SGIs as HW interrupts
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
arch/arm/include/asm/arch_gicv3.h | 2 +
arch/arm64/include/asm/arch_gicv3.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 1099 +++++++++++++++++++++---
drivers/irqchip/irq-gic-v3.c | 25 +-
drivers/irqchip/irq-gic-v4.c | 143 ++-
include/kvm/arm_vgic.h | 5 +-
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 75 +-
include/linux/irqchip/arm-gic-v4.h | 45 +-
virt/kvm/arm/arm.c | 12 +-
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 15 +-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +-
virt/kvm/arm/vgic/vgic-v3.c | 5 +
virt/kvm/arm/vgic/vgic-v4.c | 106 ++-
virt/kvm/arm/vgic/vgic.c | 4 -
virt/kvm/arm/vgic/vgic.h | 2 -
17 files changed, 1466 insertions(+), 177 deletions(-)
--
2.20.1
next reply other threads:[~2019-09-23 18:26 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 18:25 Marc Zyngier [this message]
2019-09-23 18:25 ` [PATCH 00/35] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-09-23 18:25 ` [PATCH 01/35] KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 02/35] irqchip/gic-v3-its: Factor out wait_for_syncr primitive Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-24 8:58 ` Andrew Murray
2019-09-24 8:58 ` Andrew Murray
2019-09-23 18:25 ` [PATCH 03/35] irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-26 14:57 ` Zenghui Yu
2019-09-26 14:57 ` Zenghui Yu
2019-09-26 15:34 ` Marc Zyngier
2019-09-26 15:34 ` Marc Zyngier
2019-09-26 16:17 ` Marc Zyngier
2019-09-26 16:17 ` Marc Zyngier
2019-09-27 6:59 ` Zenghui Yu
2019-09-27 6:59 ` Zenghui Yu
2019-09-23 18:25 ` [PATCH 04/35] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-24 10:24 ` Andrew Murray
2019-09-24 10:24 ` Andrew Murray
2019-09-24 10:49 ` Marc Zyngier
2019-09-24 10:49 ` Marc Zyngier
2019-09-24 11:00 ` Andrew Murray
2019-09-24 11:00 ` Andrew Murray
2019-09-24 11:18 ` Marc Zyngier
2019-09-24 11:18 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 05/35] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-24 10:49 ` Andrew Murray
2019-09-24 10:49 ` Andrew Murray
2019-09-24 11:00 ` Marc Zyngier
2019-09-24 11:00 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 06/35] irqchip/gic-v3-its: Make is_v4 use a TYPER copy Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 07/35] irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 08/35] irqchip/gic-v3-its: Kill its->device_ids " Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 09/35] irqchip/gic-v3-its: Add get_vlpi_map() helper Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 10/35] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-25 13:04 ` Zenghui Yu
2019-09-25 13:04 ` Zenghui Yu
2019-09-25 14:41 ` Marc Zyngier
2019-09-25 14:41 ` Marc Zyngier
2019-09-25 17:14 ` Marc Zyngier
2019-09-25 17:14 ` Marc Zyngier
2019-09-26 15:19 ` Zenghui Yu
2019-09-26 15:19 ` Zenghui Yu
2019-09-26 15:57 ` Marc Zyngier
2019-09-26 15:57 ` Marc Zyngier
2019-09-26 16:27 ` Marc Zyngier
2019-09-26 16:27 ` Marc Zyngier
2019-09-27 2:01 ` Zenghui Yu
2019-09-27 2:01 ` Zenghui Yu
2019-09-27 1:59 ` Zenghui Yu
2019-09-27 1:59 ` Zenghui Yu
2019-09-23 18:25 ` [PATCH 11/35] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 12/35] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 13/35] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 14/35] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 15/35] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 16/35] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 17/35] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 18/35] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 19/35] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 20/35] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-28 2:02 ` Zenghui Yu
2019-09-28 2:02 ` Zenghui Yu
2019-09-30 9:20 ` Marc Zyngier
2019-09-30 9:20 ` Marc Zyngier
2019-09-30 9:40 ` Zenghui Yu
2019-09-30 9:40 ` Zenghui Yu
2019-09-23 18:25 ` [PATCH 21/35] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 22/35] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 23/35] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 24/35] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-28 2:20 ` Zenghui Yu
2019-09-28 2:20 ` Zenghui Yu
2019-09-28 3:07 ` Zenghui Yu
2019-09-28 3:07 ` Zenghui Yu
2019-09-23 18:25 ` [PATCH 25/35] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 26/35] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 27/35] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:25 ` [PATCH 28/35] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-09-23 18:25 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 29/35] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 30/35] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 31/35] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-28 3:11 ` Zenghui Yu
2019-09-28 3:11 ` Zenghui Yu
2019-09-30 9:23 ` Marc Zyngier
2019-09-30 9:23 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 32/35] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 33/35] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 34/35] KVM: arm64: GICv4.1: Configure SGIs as HW interrupts Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
2019-09-23 18:26 ` [PATCH 35/35] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier
2019-09-23 18:26 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190923182606.32100-1-maz@kernel.org \
--to=maz@kernel.org \
--cc=jason@lakedaemon.net \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.