* [alsa-devel] [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema [not found] <CGME20190924150230eucas1p295da8f6aa018aec4acabc068f6e1afa1@eucas1p2.samsung.com> @ 2019-09-24 15:01 ` Marek Szyprowski 0 siblings, 0 replies; 8+ messages in thread From: Marek Szyprowski @ 2019-09-24 15:01 UTC (permalink / raw) To: devicetree, alsa-devel, linux-kernel, linux-samsung-soc Cc: Mark Rutland, Maciej Falkowski, Liam Girdwood, Rob Herring, Mark Brown, Krzysztof Kozlowski, Sylwester Nawrocki, Marek Szyprowski From: Maciej Falkowski <m.falkowski@samsung.com> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ 2 files changed, 83 insertions(+), 42 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt deleted file mode 100644 index f5ccc12ddc00..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt +++ /dev/null @@ -1,42 +0,0 @@ -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec - -Required properties: - - - compatible : "samsung,tm2-audio" - - model : the user-visible name of this sound complex - - audio-codec : the first entry should be phandle of the wm5110 audio - codec node, as described in ../mfd/arizona.txt; - the second entry should be phandle of the HDMI - transmitter node - - i2s-controller : the list of phandle and argument tuples pointing to - I2S controllers, the first entry should be I2S0 and - the second one I2S1 - - audio-amplifier : the phandle of the MAX98504 amplifier - - samsung,audio-routing : a list of the connections between audio components; - each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source; valid names for sources and sinks are the - WM5110's and MAX98504's pins and the jacks on the - board: HP, SPK, Main Mic, Sub Mic, Third Mic, - Headset Mic - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator - - -Example: - -sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>, <&hdmi>; - i2s-controller = <&i2s0 0>, <&i2s1 0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 0>; - model = "wm5110"; - samsung,audio-routing = - "HP", "HPOUT1L", - "HP", "HPOUT1R", - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - "Main Mic", "MICBIAS2", - "IN1R", "Main Mic"; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml new file mode 100644 index 000000000000..377f8cbe17b8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,tm2-audio + + model: + maxItems: 1 + + audio-codec: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: | + phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt; + - description: phandle of the HDMI transmitter node. + + i2s-controller: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: phandle of the I2S0. + - description: phandle of the I2S1. + + audio-amplifier: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of the MAX98504 amplifier. + + samsung,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + List of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names for sources and sinks are + the WM5110's and MAX98504's pins and the jacks on the + board: HP, SPK, Main Mic, Sub Mic, Third Mic, Headset Mic. + + mic-bias-gpios: + description: GPIO pin that enables the Main Mic bias regulator. + maxItems: 1 + +required: + - compatible + - model + - audio-codec + - i2s-controller + - audio-amplifier + - samsung,audio-routing + - mic-bias-gpios + +additionalProperties: false + +examples: + - | + sound { + compatible = "samsung,tm2-audio"; + model = "wm5110"; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3>; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; + }; + -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema @ 2019-09-24 15:01 ` Marek Szyprowski 0 siblings, 0 replies; 8+ messages in thread From: Marek Szyprowski @ 2019-09-24 15:01 UTC (permalink / raw) To: devicetree, alsa-devel, linux-kernel, linux-samsung-soc Cc: Rob Herring, Mark Rutland, Krzysztof Kozlowski, Mark Brown, Sylwester Nawrocki, Liam Girdwood, Maciej Falkowski, Marek Szyprowski From: Maciej Falkowski <m.falkowski@samsung.com> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ 2 files changed, 83 insertions(+), 42 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt deleted file mode 100644 index f5ccc12ddc00..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt +++ /dev/null @@ -1,42 +0,0 @@ -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec - -Required properties: - - - compatible : "samsung,tm2-audio" - - model : the user-visible name of this sound complex - - audio-codec : the first entry should be phandle of the wm5110 audio - codec node, as described in ../mfd/arizona.txt; - the second entry should be phandle of the HDMI - transmitter node - - i2s-controller : the list of phandle and argument tuples pointing to - I2S controllers, the first entry should be I2S0 and - the second one I2S1 - - audio-amplifier : the phandle of the MAX98504 amplifier - - samsung,audio-routing : a list of the connections between audio components; - each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source; valid names for sources and sinks are the - WM5110's and MAX98504's pins and the jacks on the - board: HP, SPK, Main Mic, Sub Mic, Third Mic, - Headset Mic - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator - - -Example: - -sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>, <&hdmi>; - i2s-controller = <&i2s0 0>, <&i2s1 0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 0>; - model = "wm5110"; - samsung,audio-routing = - "HP", "HPOUT1L", - "HP", "HPOUT1R", - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - "Main Mic", "MICBIAS2", - "IN1R", "Main Mic"; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml new file mode 100644 index 000000000000..377f8cbe17b8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,tm2-audio + + model: + maxItems: 1 + + audio-codec: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: | + phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt; + - description: phandle of the HDMI transmitter node. + + i2s-controller: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: phandle of the I2S0. + - description: phandle of the I2S1. + + audio-amplifier: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of the MAX98504 amplifier. + + samsung,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + List of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names for sources and sinks are + the WM5110's and MAX98504's pins and the jacks on the + board: HP, SPK, Main Mic, Sub Mic, Third Mic, Headset Mic. + + mic-bias-gpios: + description: GPIO pin that enables the Main Mic bias regulator. + maxItems: 1 + +required: + - compatible + - model + - audio-codec + - i2s-controller + - audio-amplifier + - samsung,audio-routing + - mic-bias-gpios + +additionalProperties: false + +examples: + - | + sound { + compatible = "samsung,tm2-audio"; + model = "wm5110"; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3>; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; + }; + -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [alsa-devel] [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema 2019-09-24 15:01 ` Marek Szyprowski @ 2019-09-24 15:20 ` Krzysztof Kozlowski -1 siblings, 0 replies; 8+ messages in thread From: Krzysztof Kozlowski @ 2019-09-24 15:20 UTC (permalink / raw) To: Marek Szyprowski Cc: Mark Rutland, devicetree, alsa-devel, linux-samsung-soc, Maciej Falkowski, Mark Brown, linux-kernel, Liam Girdwood, Rob Herring, Sylwester Nawrocki On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: > From: Maciej Falkowski <m.falkowski@samsung.com> > > Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. > > Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- > .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ > 2 files changed, 83 insertions(+), 42 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > deleted file mode 100644 > index f5ccc12ddc00..000000000000 > --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > +++ /dev/null > @@ -1,42 +0,0 @@ > -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec > - > -Required properties: > - > - - compatible : "samsung,tm2-audio" > - - model : the user-visible name of this sound complex > - - audio-codec : the first entry should be phandle of the wm5110 audio > - codec node, as described in ../mfd/arizona.txt; > - the second entry should be phandle of the HDMI > - transmitter node > - - i2s-controller : the list of phandle and argument tuples pointing to > - I2S controllers, the first entry should be I2S0 and > - the second one I2S1 > - - audio-amplifier : the phandle of the MAX98504 amplifier > - - samsung,audio-routing : a list of the connections between audio components; > - each entry is a pair of strings, the first being the > - connection's sink, the second being the connection's > - source; valid names for sources and sinks are the > - WM5110's and MAX98504's pins and the jacks on the > - board: HP, SPK, Main Mic, Sub Mic, Third Mic, > - Headset Mic > - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator > - > - > -Example: > - > -sound { > - compatible = "samsung,tm2-audio"; > - audio-codec = <&wm5110>, <&hdmi>; > - i2s-controller = <&i2s0 0>, <&i2s1 0>; > - audio-amplifier = <&max98504>; > - mic-bias-gpios = <&gpr3 2 0>; > - model = "wm5110"; > - samsung,audio-routing = > - "HP", "HPOUT1L", > - "HP", "HPOUT1R", > - "SPK", "SPKOUT", > - "SPKOUT", "HPOUT2L", > - "SPKOUT", "HPOUT2R", > - "Main Mic", "MICBIAS2", > - "IN1R", "Main Mic"; > -}; > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > new file mode 100644 > index 000000000000..377f8cbe17b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec > + > +maintainers: > + - Krzysztof Kozlowski <krzk@kernel.org> > + - Sylwester Nawrocki <s.nawrocki@samsung.com> > + > +properties: > + compatible: > + const: samsung,tm2-audio > + > + model: > + maxItems: 1 $ref to string, then maxItems are not needed. Add description (copy-paste). > + > + audio-codec: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: | > + phandle of the wm5110 audio codec node, > + as described in ../mfd/arizona.txt; > + - description: phandle of the HDMI transmitter node. > + > + i2s-controller: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: phandle of the I2S0. > + - description: phandle of the I2S1. > + > + audio-amplifier: Can you order the nodes here and in required section by name (except compatible which should be first)? Best regards, Krzysztof _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema @ 2019-09-24 15:20 ` Krzysztof Kozlowski 0 siblings, 0 replies; 8+ messages in thread From: Krzysztof Kozlowski @ 2019-09-24 15:20 UTC (permalink / raw) To: Marek Szyprowski Cc: devicetree, alsa-devel, linux-kernel, linux-samsung-soc, Rob Herring, Mark Rutland, Mark Brown, Sylwester Nawrocki, Liam Girdwood, Maciej Falkowski On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: > From: Maciej Falkowski <m.falkowski@samsung.com> > > Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. > > Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- > .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ > 2 files changed, 83 insertions(+), 42 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > deleted file mode 100644 > index f5ccc12ddc00..000000000000 > --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > +++ /dev/null > @@ -1,42 +0,0 @@ > -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec > - > -Required properties: > - > - - compatible : "samsung,tm2-audio" > - - model : the user-visible name of this sound complex > - - audio-codec : the first entry should be phandle of the wm5110 audio > - codec node, as described in ../mfd/arizona.txt; > - the second entry should be phandle of the HDMI > - transmitter node > - - i2s-controller : the list of phandle and argument tuples pointing to > - I2S controllers, the first entry should be I2S0 and > - the second one I2S1 > - - audio-amplifier : the phandle of the MAX98504 amplifier > - - samsung,audio-routing : a list of the connections between audio components; > - each entry is a pair of strings, the first being the > - connection's sink, the second being the connection's > - source; valid names for sources and sinks are the > - WM5110's and MAX98504's pins and the jacks on the > - board: HP, SPK, Main Mic, Sub Mic, Third Mic, > - Headset Mic > - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator > - > - > -Example: > - > -sound { > - compatible = "samsung,tm2-audio"; > - audio-codec = <&wm5110>, <&hdmi>; > - i2s-controller = <&i2s0 0>, <&i2s1 0>; > - audio-amplifier = <&max98504>; > - mic-bias-gpios = <&gpr3 2 0>; > - model = "wm5110"; > - samsung,audio-routing = > - "HP", "HPOUT1L", > - "HP", "HPOUT1R", > - "SPK", "SPKOUT", > - "SPKOUT", "HPOUT2L", > - "SPKOUT", "HPOUT2R", > - "Main Mic", "MICBIAS2", > - "IN1R", "Main Mic"; > -}; > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > new file mode 100644 > index 000000000000..377f8cbe17b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec > + > +maintainers: > + - Krzysztof Kozlowski <krzk@kernel.org> > + - Sylwester Nawrocki <s.nawrocki@samsung.com> > + > +properties: > + compatible: > + const: samsung,tm2-audio > + > + model: > + maxItems: 1 $ref to string, then maxItems are not needed. Add description (copy-paste). > + > + audio-codec: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: | > + phandle of the wm5110 audio codec node, > + as described in ../mfd/arizona.txt; > + - description: phandle of the HDMI transmitter node. > + > + i2s-controller: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: phandle of the I2S0. > + - description: phandle of the I2S1. > + > + audio-amplifier: Can you order the nodes here and in required section by name (except compatible which should be first)? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [alsa-devel] [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema 2019-09-24 15:20 ` Krzysztof Kozlowski @ 2019-09-26 11:49 ` Maciej Falkowski -1 siblings, 0 replies; 8+ messages in thread From: Maciej Falkowski @ 2019-09-26 11:49 UTC (permalink / raw) To: Krzysztof Kozlowski, Marek Szyprowski Cc: Mark Rutland, devicetree, alsa-devel, linux-samsung-soc, Mark Brown, linux-kernel, Liam Girdwood, Rob Herring, Sylwester Nawrocki On 9/24/19 5:20 PM, Krzysztof Kozlowski wrote: > On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: >> From: Maciej Falkowski <m.falkowski@samsung.com> >> >> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. >> >> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- >> .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ >> 2 files changed, 83 insertions(+), 42 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> deleted file mode 100644 >> index f5ccc12ddc00..000000000000 >> --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> +++ /dev/null >> @@ -1,42 +0,0 @@ >> -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec >> - >> -Required properties: >> - >> - - compatible : "samsung,tm2-audio" >> - - model : the user-visible name of this sound complex >> - - audio-codec : the first entry should be phandle of the wm5110 audio >> - codec node, as described in ../mfd/arizona.txt; >> - the second entry should be phandle of the HDMI >> - transmitter node >> - - i2s-controller : the list of phandle and argument tuples pointing to >> - I2S controllers, the first entry should be I2S0 and >> - the second one I2S1 >> - - audio-amplifier : the phandle of the MAX98504 amplifier >> - - samsung,audio-routing : a list of the connections between audio components; >> - each entry is a pair of strings, the first being the >> - connection's sink, the second being the connection's >> - source; valid names for sources and sinks are the >> - WM5110's and MAX98504's pins and the jacks on the >> - board: HP, SPK, Main Mic, Sub Mic, Third Mic, >> - Headset Mic >> - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator >> - >> - >> -Example: >> - >> -sound { >> - compatible = "samsung,tm2-audio"; >> - audio-codec = <&wm5110>, <&hdmi>; >> - i2s-controller = <&i2s0 0>, <&i2s1 0>; >> - audio-amplifier = <&max98504>; >> - mic-bias-gpios = <&gpr3 2 0>; >> - model = "wm5110"; >> - samsung,audio-routing = >> - "HP", "HPOUT1L", >> - "HP", "HPOUT1R", >> - "SPK", "SPKOUT", >> - "SPKOUT", "HPOUT2L", >> - "SPKOUT", "HPOUT2R", >> - "Main Mic", "MICBIAS2", >> - "IN1R", "Main Mic"; >> -}; >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> new file mode 100644 >> index 000000000000..377f8cbe17b8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> @@ -0,0 +1,83 @@ >> +# SPDX-License-Identifier: GPL-2.0 >> +%YAML 1.2 >> +--- >> +$id: https://protect2.fireeye.com/url?k=ccb9abe11b8a2745.ccb820ae-a91cd712f01d248e&u=http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec >> + >> +maintainers: >> + - Krzysztof Kozlowski <krzk@kernel.org> >> + - Sylwester Nawrocki <s.nawrocki@samsung.com> >> + >> +properties: >> + compatible: >> + const: samsung,tm2-audio >> + >> + model: >> + maxItems: 1 > $ref to string, then maxItems are not needed. > Add description (copy-paste). Hi Krzysztof, You're right, model is not a standard property. >> + >> + audio-codec: >> + allOf: >> + - $ref: /schemas/types.yaml#/definitions/phandle-array >> + - items: >> + - description: | >> + phandle of the wm5110 audio codec node, >> + as described in ../mfd/arizona.txt; >> + - description: phandle of the HDMI transmitter node. >> + >> + i2s-controller: >> + allOf: >> + - $ref: /schemas/types.yaml#/definitions/phandle-array >> + - items: >> + - description: phandle of the I2S0. >> + - description: phandle of the I2S1. >> + >> + audio-amplifier: > Can you order the nodes here and in required section by name (except > compatible which should be first)? Current order is already well-established across bindings (even example). I think that sorted properties are undesired with that. Best regards, Maciej Falkowski > > Best regards, > Krzysztof > > > _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema @ 2019-09-26 11:49 ` Maciej Falkowski 0 siblings, 0 replies; 8+ messages in thread From: Maciej Falkowski @ 2019-09-26 11:49 UTC (permalink / raw) To: Krzysztof Kozlowski, Marek Szyprowski Cc: devicetree, alsa-devel, linux-kernel, linux-samsung-soc, Rob Herring, Mark Rutland, Mark Brown, Sylwester Nawrocki, Liam Girdwood On 9/24/19 5:20 PM, Krzysztof Kozlowski wrote: > On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: >> From: Maciej Falkowski <m.falkowski@samsung.com> >> >> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. >> >> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- >> .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ >> 2 files changed, 83 insertions(+), 42 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> deleted file mode 100644 >> index f5ccc12ddc00..000000000000 >> --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt >> +++ /dev/null >> @@ -1,42 +0,0 @@ >> -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec >> - >> -Required properties: >> - >> - - compatible : "samsung,tm2-audio" >> - - model : the user-visible name of this sound complex >> - - audio-codec : the first entry should be phandle of the wm5110 audio >> - codec node, as described in ../mfd/arizona.txt; >> - the second entry should be phandle of the HDMI >> - transmitter node >> - - i2s-controller : the list of phandle and argument tuples pointing to >> - I2S controllers, the first entry should be I2S0 and >> - the second one I2S1 >> - - audio-amplifier : the phandle of the MAX98504 amplifier >> - - samsung,audio-routing : a list of the connections between audio components; >> - each entry is a pair of strings, the first being the >> - connection's sink, the second being the connection's >> - source; valid names for sources and sinks are the >> - WM5110's and MAX98504's pins and the jacks on the >> - board: HP, SPK, Main Mic, Sub Mic, Third Mic, >> - Headset Mic >> - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator >> - >> - >> -Example: >> - >> -sound { >> - compatible = "samsung,tm2-audio"; >> - audio-codec = <&wm5110>, <&hdmi>; >> - i2s-controller = <&i2s0 0>, <&i2s1 0>; >> - audio-amplifier = <&max98504>; >> - mic-bias-gpios = <&gpr3 2 0>; >> - model = "wm5110"; >> - samsung,audio-routing = >> - "HP", "HPOUT1L", >> - "HP", "HPOUT1R", >> - "SPK", "SPKOUT", >> - "SPKOUT", "HPOUT2L", >> - "SPKOUT", "HPOUT2R", >> - "Main Mic", "MICBIAS2", >> - "IN1R", "Main Mic"; >> -}; >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> new file mode 100644 >> index 000000000000..377f8cbe17b8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml >> @@ -0,0 +1,83 @@ >> +# SPDX-License-Identifier: GPL-2.0 >> +%YAML 1.2 >> +--- >> +$id: https://protect2.fireeye.com/url?k=ccb9abe11b8a2745.ccb820ae-a91cd712f01d248e&u=http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec >> + >> +maintainers: >> + - Krzysztof Kozlowski <krzk@kernel.org> >> + - Sylwester Nawrocki <s.nawrocki@samsung.com> >> + >> +properties: >> + compatible: >> + const: samsung,tm2-audio >> + >> + model: >> + maxItems: 1 > $ref to string, then maxItems are not needed. > Add description (copy-paste). Hi Krzysztof, You're right, model is not a standard property. >> + >> + audio-codec: >> + allOf: >> + - $ref: /schemas/types.yaml#/definitions/phandle-array >> + - items: >> + - description: | >> + phandle of the wm5110 audio codec node, >> + as described in ../mfd/arizona.txt; >> + - description: phandle of the HDMI transmitter node. >> + >> + i2s-controller: >> + allOf: >> + - $ref: /schemas/types.yaml#/definitions/phandle-array >> + - items: >> + - description: phandle of the I2S0. >> + - description: phandle of the I2S1. >> + >> + audio-amplifier: > Can you order the nodes here and in required section by name (except > compatible which should be first)? Current order is already well-established across bindings (even example). I think that sorted properties are undesired with that. Best regards, Maciej Falkowski > > Best regards, > Krzysztof > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [alsa-devel] [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema 2019-09-26 11:49 ` Maciej Falkowski @ 2019-09-26 12:43 ` Krzysztof Kozlowski -1 siblings, 0 replies; 8+ messages in thread From: Krzysztof Kozlowski @ 2019-09-26 12:43 UTC (permalink / raw) To: Maciej Falkowski Cc: Mark Rutland, devicetree, alsa-devel, linux-samsung-soc, Mark Brown, linux-kernel, Liam Girdwood, Rob Herring, Sylwester Nawrocki, Marek Szyprowski On Thu, Sep 26, 2019 at 01:49:09PM +0200, Maciej Falkowski wrote: > > On 9/24/19 5:20 PM, Krzysztof Kozlowski wrote: > > On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: > >> From: Maciej Falkowski <m.falkowski@samsung.com> > >> > >> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. > >> > >> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> > >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > >> --- > >> .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- > >> .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ > >> 2 files changed, 83 insertions(+), 42 deletions(-) > >> delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> deleted file mode 100644 > >> index f5ccc12ddc00..000000000000 > >> --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> +++ /dev/null > >> @@ -1,42 +0,0 @@ > >> -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec > >> - > >> -Required properties: > >> - > >> - - compatible : "samsung,tm2-audio" > >> - - model : the user-visible name of this sound complex > >> - - audio-codec : the first entry should be phandle of the wm5110 audio > >> - codec node, as described in ../mfd/arizona.txt; > >> - the second entry should be phandle of the HDMI > >> - transmitter node > >> - - i2s-controller : the list of phandle and argument tuples pointing to > >> - I2S controllers, the first entry should be I2S0 and > >> - the second one I2S1 > >> - - audio-amplifier : the phandle of the MAX98504 amplifier > >> - - samsung,audio-routing : a list of the connections between audio components; > >> - each entry is a pair of strings, the first being the > >> - connection's sink, the second being the connection's > >> - source; valid names for sources and sinks are the > >> - WM5110's and MAX98504's pins and the jacks on the > >> - board: HP, SPK, Main Mic, Sub Mic, Third Mic, > >> - Headset Mic > >> - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator > >> - > >> - > >> -Example: > >> - > >> -sound { > >> - compatible = "samsung,tm2-audio"; > >> - audio-codec = <&wm5110>, <&hdmi>; > >> - i2s-controller = <&i2s0 0>, <&i2s1 0>; > >> - audio-amplifier = <&max98504>; > >> - mic-bias-gpios = <&gpr3 2 0>; > >> - model = "wm5110"; > >> - samsung,audio-routing = > >> - "HP", "HPOUT1L", > >> - "HP", "HPOUT1R", > >> - "SPK", "SPKOUT", > >> - "SPKOUT", "HPOUT2L", > >> - "SPKOUT", "HPOUT2R", > >> - "Main Mic", "MICBIAS2", > >> - "IN1R", "Main Mic"; > >> -}; > >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> new file mode 100644 > >> index 000000000000..377f8cbe17b8 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> @@ -0,0 +1,83 @@ > >> +# SPDX-License-Identifier: GPL-2.0 > >> +%YAML 1.2 > >> +--- > >> +$id: https://protect2.fireeye.com/url?k=ccb9abe11b8a2745.ccb820ae-a91cd712f01d248e&u=http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec > >> + > >> +maintainers: > >> + - Krzysztof Kozlowski <krzk@kernel.org> > >> + - Sylwester Nawrocki <s.nawrocki@samsung.com> > >> + > >> +properties: > >> + compatible: > >> + const: samsung,tm2-audio > >> + > >> + model: > >> + maxItems: 1 > > $ref to string, then maxItems are not needed. > > Add description (copy-paste). > > Hi Krzysztof, > > You're right, model is not a standard property. > > >> + > >> + audio-codec: > >> + allOf: > >> + - $ref: /schemas/types.yaml#/definitions/phandle-array > >> + - items: > >> + - description: | > >> + phandle of the wm5110 audio codec node, > >> + as described in ../mfd/arizona.txt; > >> + - description: phandle of the HDMI transmitter node. > >> + > >> + i2s-controller: > >> + allOf: > >> + - $ref: /schemas/types.yaml#/definitions/phandle-array > >> + - items: > >> + - description: phandle of the I2S0. > >> + - description: phandle of the I2S1. > >> + > >> + audio-amplifier: > > Can you order the nodes here and in required section by name (except > > compatible which should be first)? > > Current order is already well-established across bindings (even example). > I think that sorted properties are undesired with that. OK, good point, so leave the standard properties in order matching example-bindings. However order the reset because "audio-codec", then "i2s-controler" and then again "audio-...". So bring some order here. Best regards, Krzysztof _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema @ 2019-09-26 12:43 ` Krzysztof Kozlowski 0 siblings, 0 replies; 8+ messages in thread From: Krzysztof Kozlowski @ 2019-09-26 12:43 UTC (permalink / raw) To: Maciej Falkowski Cc: Marek Szyprowski, devicetree, alsa-devel, linux-kernel, linux-samsung-soc, Rob Herring, Mark Rutland, Mark Brown, Sylwester Nawrocki, Liam Girdwood On Thu, Sep 26, 2019 at 01:49:09PM +0200, Maciej Falkowski wrote: > > On 9/24/19 5:20 PM, Krzysztof Kozlowski wrote: > > On Tue, Sep 24, 2019 at 05:01:46PM +0200, Marek Szyprowski wrote: > >> From: Maciej Falkowski <m.falkowski@samsung.com> > >> > >> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. > >> > >> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> > >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > >> --- > >> .../bindings/sound/samsung,tm2-audio.txt | 42 ---------- > >> .../bindings/sound/samsung,tm2-audio.yaml | 83 +++++++++++++++++++ > >> 2 files changed, 83 insertions(+), 42 deletions(-) > >> delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> deleted file mode 100644 > >> index f5ccc12ddc00..000000000000 > >> --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > >> +++ /dev/null > >> @@ -1,42 +0,0 @@ > >> -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec > >> - > >> -Required properties: > >> - > >> - - compatible : "samsung,tm2-audio" > >> - - model : the user-visible name of this sound complex > >> - - audio-codec : the first entry should be phandle of the wm5110 audio > >> - codec node, as described in ../mfd/arizona.txt; > >> - the second entry should be phandle of the HDMI > >> - transmitter node > >> - - i2s-controller : the list of phandle and argument tuples pointing to > >> - I2S controllers, the first entry should be I2S0 and > >> - the second one I2S1 > >> - - audio-amplifier : the phandle of the MAX98504 amplifier > >> - - samsung,audio-routing : a list of the connections between audio components; > >> - each entry is a pair of strings, the first being the > >> - connection's sink, the second being the connection's > >> - source; valid names for sources and sinks are the > >> - WM5110's and MAX98504's pins and the jacks on the > >> - board: HP, SPK, Main Mic, Sub Mic, Third Mic, > >> - Headset Mic > >> - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator > >> - > >> - > >> -Example: > >> - > >> -sound { > >> - compatible = "samsung,tm2-audio"; > >> - audio-codec = <&wm5110>, <&hdmi>; > >> - i2s-controller = <&i2s0 0>, <&i2s1 0>; > >> - audio-amplifier = <&max98504>; > >> - mic-bias-gpios = <&gpr3 2 0>; > >> - model = "wm5110"; > >> - samsung,audio-routing = > >> - "HP", "HPOUT1L", > >> - "HP", "HPOUT1R", > >> - "SPK", "SPKOUT", > >> - "SPKOUT", "HPOUT2L", > >> - "SPKOUT", "HPOUT2R", > >> - "Main Mic", "MICBIAS2", > >> - "IN1R", "Main Mic"; > >> -}; > >> diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> new file mode 100644 > >> index 000000000000..377f8cbe17b8 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > >> @@ -0,0 +1,83 @@ > >> +# SPDX-License-Identifier: GPL-2.0 > >> +%YAML 1.2 > >> +--- > >> +$id: https://protect2.fireeye.com/url?k=ccb9abe11b8a2745.ccb820ae-a91cd712f01d248e&u=http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec > >> + > >> +maintainers: > >> + - Krzysztof Kozlowski <krzk@kernel.org> > >> + - Sylwester Nawrocki <s.nawrocki@samsung.com> > >> + > >> +properties: > >> + compatible: > >> + const: samsung,tm2-audio > >> + > >> + model: > >> + maxItems: 1 > > $ref to string, then maxItems are not needed. > > Add description (copy-paste). > > Hi Krzysztof, > > You're right, model is not a standard property. > > >> + > >> + audio-codec: > >> + allOf: > >> + - $ref: /schemas/types.yaml#/definitions/phandle-array > >> + - items: > >> + - description: | > >> + phandle of the wm5110 audio codec node, > >> + as described in ../mfd/arizona.txt; > >> + - description: phandle of the HDMI transmitter node. > >> + > >> + i2s-controller: > >> + allOf: > >> + - $ref: /schemas/types.yaml#/definitions/phandle-array > >> + - items: > >> + - description: phandle of the I2S0. > >> + - description: phandle of the I2S1. > >> + > >> + audio-amplifier: > > Can you order the nodes here and in required section by name (except > > compatible which should be first)? > > Current order is already well-established across bindings (even example). > I think that sorted properties are undesired with that. OK, good point, so leave the standard properties in order matching example-bindings. However order the reset because "audio-codec", then "i2s-controler" and then again "audio-...". So bring some order here. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-09-26 12:44 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20190924150230eucas1p295da8f6aa018aec4acabc068f6e1afa1@eucas1p2.samsung.com>
2019-09-24 15:01 ` [alsa-devel] [PATCH] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema Marek Szyprowski
2019-09-24 15:01 ` Marek Szyprowski
2019-09-24 15:20 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-24 15:20 ` Krzysztof Kozlowski
2019-09-26 11:49 ` [alsa-devel] " Maciej Falkowski
2019-09-26 11:49 ` Maciej Falkowski
2019-09-26 12:43 ` [alsa-devel] " Krzysztof Kozlowski
2019-09-26 12:43 ` Krzysztof Kozlowski
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.