[PATCH] dt-bindings: timer: Use defines instead of numbers in Exynos MCT examples

[Krzysztof Kozlowski <krzk@kernel.org>]

Make the examples in Exynos Multi Core Timer bindings more readable and
bring them closer to real DTS by using defines for interrupt flags.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Rebased on top of:
https://patchwork.kernel.org/project/linux-samsung-soc/list/?series=177667&state=*
---
 .../timer/samsung,exynos4210-mct.yaml         | 37 ++++++++++++++-----
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index bff3f54a398f..c4d152009f76 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -75,51 +75,68 @@ examples:
     // In this example, the IP contains two local timers, using separate
     // interrupts, so two local timer interrupts have been specified,
     // in addition to four global timer interrupts.
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x10050000 0x800>;
-        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
-                     <0 42 0>, <0 48 0>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
     };
 
   - |
     // In this example, the timer interrupts are connected to two separate
     // interrupt controllers. Hence, an interrupts-extended is needed.
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@101c0000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x101C0000 0x800>;
-        interrupts-extended = <&gic 0 57 0>,
-                              <&gic 0 69 0>,
+        interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                              <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
                               <&combiner 12 6>,
                               <&combiner 12 7>,
-                              <&gic 0 42 0>,
-                              <&gic 0 48 0>;
+                              <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                              <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
     };
 
   - |
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. Only one first local
     // interrupt is specified.
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
 
-        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
-                     <0 42 0>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
     };
 
   - |
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. All the local timer
     // interrupts are specified.
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
 
-        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
-                     <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
     };
-- 
2.17.1