Re: [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device()

[Bjorn Helgaas <helgaas@kernel.org>]

On Fri, Aug 16, 2019 at 07:50:39PM +0300, Sergey Miroshnichenko wrote:
> This is a yet another approach to fix an old [1-2] concurrency issue, when:
>  - two or more devices are being hot-added into a bridge which was
>    initially empty;
>  - a bridge with two or more devices is being hot-added;
>  - during boot, if BIOS/bootloader/firmware doesn't pre-enable bridges.
> 
> The problem is that a bridge is reported as enabled before the MEM/IO bits
> are actually written to the PCI_COMMAND register, so another driver thread
> starts memory requests through the not-yet-enabled bridge:
> 
>  CPU0                                        CPU1
> 
>  pci_enable_device_mem()                     pci_enable_device_mem()
>    pci_enable_bridge()                         pci_enable_bridge()
>      pci_is_enabled()
>        return false;
>      atomic_inc_return(enable_cnt)
>      Start actual enabling the bridge
>      ...                                         pci_is_enabled()
>      ...                                           return true;
>      ...                                     Start memory requests <-- FAIL
>      ...
>      Set the PCI_COMMAND_MEMORY bit <-- Must wait for this
> 
> Protect the pci_enable/disable_device() and pci_enable_bridge(), which is
> similar to the previous solution from commit 40f11adc7cd9 ("PCI: Avoid race
> while enabling upstream bridges"), but adding a per-device mutexes and
> preventing the dev->enable_cnt from from incrementing early.

This isn't directly related to the movable BARs functionality; is it
here because you see the problem more frequently when moving BARs?