Re: [PATCH v3 1/1] ARM: dts: colibri: introduce dts with UHS-I support enabled

[Shawn Guo <shawnguo@kernel.org>]

On Wed, Sep 04, 2019 at 02:09:18PM +0300, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
> 
> Introduce DTS for Colibri iMX6S/DL V1.1x re-design, where UHS-I support was
> added. Provide proper configuration for VGEN3, which allows that rail to
> be automatically switched to 1.8 volts for proper UHS-I operation mode.
> 
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
> 
> v3:
> - change hierarchy according to Marco's suggestions [Marco Felsch]
> - adjust compatible string adding v1.1 [Stefan Agner]
> 
> v2:
> - rework hierarchy of dts files, and a separate dtsi for Colibri
>   iMX6S/DL V1.1x re-design, where UHS-I was added [Marcel Ziswiler]
> - add comments about vgen3 power rail [Marcel Ziswiler]
> - fix other minor issues, addressing Marcel's comments. [Marcel Ziswiler]
> 
>  arch/arm/boot/dts/Makefile                    |  1 +
>  .../boot/dts/imx6dl-colibri-v1_1-eval-v3.dts  | 59 +++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-colibri.dtsi        | 11 +++-
>  3 files changed, 70 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9159fa2cea90..87dfc3db4343 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -401,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6dl-aristainetos2_4.dtb \
>  	imx6dl-aristainetos2_7.dtb \
>  	imx6dl-colibri-eval-v3.dtb \
> +	imx6dl-colibri-v1_1-eval-v3.dtb \
>  	imx6dl-cubox-i.dtb \
>  	imx6dl-cubox-i-emmc-som-v15.dtb \
>  	imx6dl-cubox-i-som-v15.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
> new file mode 100644
> index 000000000000..92fcf4e62ba2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +/*
> + * Copyright 2019 Toradex AG
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6dl-colibri-eval-v3.dts"
> +
> +/ {
> +	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
> +	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
> +		     "toradex,colibri_imx6dl-v1_1",
> +		     "toradex,colibri_imx6dl-eval-v3",
> +		     "toradex,colibri_imx6dl",

Please make sure these compatibles are documented.

> +		     "fsl,imx6dl";
> +};
> +
> +&iomuxc {
> +	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
> +			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
> +			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
> +			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
> +			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
> +			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
> +			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
> +			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
> +			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
> +			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
> +			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
> +		>;
> +	};
> +};
> +
> +/* Colibri MMC */
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
> +	vmmc-supply = <&reg_module_3v3>;
> +	vqmmc-supply = <&vgen3_reg>;
> +	enable-sdio-wakeup;

Check out Documentation/devicetree/bindings/power/wakeup-source.txt

Shawn

> +	keep-power-in-suspend;
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	status = "okay";
> +	/delete-property/no-1-8-v;
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 1beac22266ed..27097ab5eaab 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -215,7 +215,16 @@
>  				regulator-always-on;
>  			};
>  
> -			/* vgen3: unused */
> +			/*
> +			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
> +			 * the i.MX 6 NVCC_SD1.
> +			 */
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
>  
>  			vgen4_reg: vgen4 {
>  				regulator-min-microvolt = <1800000>;
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel