[PATCH 0/7] irqchip/irq-bcm283x update for BCM7211

[PATCH 0/7] irqchip/irq-bcm283x update for BCM7211

[Florian Fainelli]

Hi Marc, Jason, Thomas,

This patch series updates the BCM2835 and BCM2836 interrupt controller
drivers to support BCM7211 which can make use of those drivers in some
configurations where the ARM GIC is muxed out and the legacy ARM
interrupt controller is used instead.

Thank you!

Florian Fainelli (7):
  irqchip: Introduce Kconfig symbol to build irq-bcm283x.c
  dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding
  irqchip/irq-bcm2835: Add support for 7211 interrupt controller
  dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding
  irqchip/irq-bcm2836: Add support for the 7211 interrupt controller
  irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB
  irqchip/irq-bcm283x: Add registration prints

 .../brcm,bcm2835-armctrl-ic.txt               |  6 +-
 .../brcm,bcm2836-l1-intc.txt                  |  4 +-
 drivers/irqchip/Kconfig                       |  5 +
 drivers/irqchip/Makefile                      |  4 +-
 drivers/irqchip/irq-bcm2835.c                 | 95 ++++++++++++++++---
 drivers/irqchip/irq-bcm2836.c                 | 27 +++++-
 6 files changed, 119 insertions(+), 22 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/7] irqchip/irq-bcm283x update for BCM7211

[Florian Fainelli]

Hi Marc, Jason, Thomas,

This patch series updates the BCM2835 and BCM2836 interrupt controller
drivers to support BCM7211 which can make use of those drivers in some
configurations where the ARM GIC is muxed out and the legacy ARM
interrupt controller is used instead.

Thank you!

Florian Fainelli (7):
  irqchip: Introduce Kconfig symbol to build irq-bcm283x.c
  dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding
  irqchip/irq-bcm2835: Add support for 7211 interrupt controller
  dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding
  irqchip/irq-bcm2836: Add support for the 7211 interrupt controller
  irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB
  irqchip/irq-bcm283x: Add registration prints

 .../brcm,bcm2835-armctrl-ic.txt               |  6 +-
 .../brcm,bcm2836-l1-intc.txt                  |  4 +-
 drivers/irqchip/Kconfig                       |  5 +
 drivers/irqchip/Makefile                      |  4 +-
 drivers/irqchip/irq-bcm2835.c                 | 95 ++++++++++++++++---
 drivers/irqchip/irq-bcm2836.c                 | 27 +++++-
 6 files changed, 119 insertions(+), 22 deletions(-)

-- 
2.17.1

[PATCH 0/7] irqchip/irq-bcm283x update for BCM7211

[Florian Fainelli]

Hi Marc, Jason, Thomas,

This patch series updates the BCM2835 and BCM2836 interrupt controller
drivers to support BCM7211 which can make use of those drivers in some
configurations where the ARM GIC is muxed out and the legacy ARM
interrupt controller is used instead.

Thank you!

Florian Fainelli (7):
  irqchip: Introduce Kconfig symbol to build irq-bcm283x.c
  dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding
  irqchip/irq-bcm2835: Add support for 7211 interrupt controller
  dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding
  irqchip/irq-bcm2836: Add support for the 7211 interrupt controller
  irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB
  irqchip/irq-bcm283x: Add registration prints

 .../brcm,bcm2835-armctrl-ic.txt               |  6 +-
 .../brcm,bcm2836-l1-intc.txt                  |  4 +-
 drivers/irqchip/Kconfig                       |  5 +
 drivers/irqchip/Makefile                      |  4 +-
 drivers/irqchip/irq-bcm2835.c                 | 95 ++++++++++++++++---
 drivers/irqchip/irq-bcm2836.c                 | 27 +++++-
 6 files changed, 119 insertions(+), 22 deletions(-)

-- 
2.17.1

[PATCH 1/7] irqchip: Introduce Kconfig symbol to build irq-bcm283x.c

[Florian Fainelli]

Both irq-bcm2835.c and irq-bcm2836.c are currently used with
ARCH_BCM2835 but are soon going to be used with ARCH_BRCMSTB, introduce
a Kconfig symbol to make that those drivers selected/built by other
platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig  | 5 +++++
 drivers/irqchip/Makefile | 4 ++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 80e10f4e213a..d1bb20d23d27 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -113,6 +113,11 @@ config I8259
 	bool
 	select IRQ_DOMAIN
 
+config BCM283X_IRQ
+	bool
+	select IRQ_DOMAIN
+	default ARCH_BCM2835
+
 config BCM6345_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 8d0fcec6ab23..9cf14c7945f6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -5,8 +5,8 @@ obj-$(CONFIG_AL_FIC)			+= irq-al-fic.o
 obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2835.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2836.o
 obj-$(CONFIG_DAVINCI_AINTC)		+= irq-davinci-aintc.o
 obj-$(CONFIG_DAVINCI_CP_INTC)		+= irq-davinci-cp-intc.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/7] irqchip: Introduce Kconfig symbol to build irq-bcm283x.c

[Florian Fainelli]

Both irq-bcm2835.c and irq-bcm2836.c are currently used with
ARCH_BCM2835 but are soon going to be used with ARCH_BRCMSTB, introduce
a Kconfig symbol to make that those drivers selected/built by other
platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig  | 5 +++++
 drivers/irqchip/Makefile | 4 ++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 80e10f4e213a..d1bb20d23d27 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -113,6 +113,11 @@ config I8259
 	bool
 	select IRQ_DOMAIN
 
+config BCM283X_IRQ
+	bool
+	select IRQ_DOMAIN
+	default ARCH_BCM2835
+
 config BCM6345_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 8d0fcec6ab23..9cf14c7945f6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -5,8 +5,8 @@ obj-$(CONFIG_AL_FIC)			+= irq-al-fic.o
 obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2835.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2836.o
 obj-$(CONFIG_DAVINCI_AINTC)		+= irq-davinci-aintc.o
 obj-$(CONFIG_DAVINCI_CP_INTC)		+= irq-davinci-cp-intc.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
-- 
2.17.1

[PATCH 1/7] irqchip: Introduce Kconfig symbol to build irq-bcm283x.c

[Florian Fainelli]

Both irq-bcm2835.c and irq-bcm2836.c are currently used with
ARCH_BCM2835 but are soon going to be used with ARCH_BRCMSTB, introduce
a Kconfig symbol to make that those drivers selected/built by other
platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig  | 5 +++++
 drivers/irqchip/Makefile | 4 ++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 80e10f4e213a..d1bb20d23d27 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -113,6 +113,11 @@ config I8259
 	bool
 	select IRQ_DOMAIN
 
+config BCM283X_IRQ
+	bool
+	select IRQ_DOMAIN
+	default ARCH_BCM2835
+
 config BCM6345_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 8d0fcec6ab23..9cf14c7945f6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -5,8 +5,8 @@ obj-$(CONFIG_AL_FIC)			+= irq-al-fic.o
 obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2835.o
+obj-$(CONFIG_BCM283X_IRQ)		+= irq-bcm2836.o
 obj-$(CONFIG_DAVINCI_AINTC)		+= irq-davinci-aintc.o
 obj-$(CONFIG_DAVINCI_CP_INTC)		+= irq-davinci-cp-intc.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
-- 
2.17.1

[PATCH 2/7] dt-bindings: interrupt-controller: Add brcm, bcm7211-armctrl-ic binding

[Florian Fainelli]

BCM7211 features a second level interrupt controller similar in nature
to BCM2836, with a few modifications to the register offsets, document
that specific compatible string.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 0f1af5a1c12e..0b07845b46e4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -12,7 +12,8 @@ interrupt there indicates that the ARMCTRL has an interrupt to handle.
 Required properties:
 
 - compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
+                 "brcm,bcm2836-armctrl-ic" or
+		 "brcm,bcm7211-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -25,7 +26,8 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
-Additional required properties for brcm,bcm2836-armctrl-ic:
+Additional required properties for brcm,bcm2836-armctrl-ic and
+brcm,bcm7211-armctrl-ic:
 - interrupts : Specifies the interrupt on the parent for this interrupt
   controller to handle.
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding

[Florian Fainelli]

BCM7211 features a second level interrupt controller similar in nature
to BCM2836, with a few modifications to the register offsets, document
that specific compatible string.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 0f1af5a1c12e..0b07845b46e4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -12,7 +12,8 @@ interrupt there indicates that the ARMCTRL has an interrupt to handle.
 Required properties:
 
 - compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
+                 "brcm,bcm2836-armctrl-ic" or
+		 "brcm,bcm7211-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -25,7 +26,8 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
-Additional required properties for brcm,bcm2836-armctrl-ic:
+Additional required properties for brcm,bcm2836-armctrl-ic and
+brcm,bcm7211-armctrl-ic:
 - interrupts : Specifies the interrupt on the parent for this interrupt
   controller to handle.
 
-- 
2.17.1

[PATCH 2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding

[Florian Fainelli]

BCM7211 features a second level interrupt controller similar in nature
to BCM2836, with a few modifications to the register offsets, document
that specific compatible string.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 0f1af5a1c12e..0b07845b46e4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -12,7 +12,8 @@ interrupt there indicates that the ARMCTRL has an interrupt to handle.
 Required properties:
 
 - compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
+                 "brcm,bcm2836-armctrl-ic" or
+		 "brcm,bcm7211-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -25,7 +26,8 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
-Additional required properties for brcm,bcm2836-armctrl-ic:
+Additional required properties for brcm,bcm2836-armctrl-ic and
+brcm,bcm7211-armctrl-ic:
 - interrupts : Specifies the interrupt on the parent for this interrupt
   controller to handle.
 
-- 
2.17.1

Re: [PATCH 2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding

[Rob Herring]

On Tue,  1 Oct 2019 15:48:37 -0700, Florian Fainelli wrote:
> BCM7211 features a second level interrupt controller similar in nature
> to BCM2836, with a few modifications to the register offsets, document
> that specific compatible string.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding

[Rob Herring]

On Tue,  1 Oct 2019 15:48:37 -0700, Florian Fainelli wrote:
> BCM7211 features a second level interrupt controller similar in nature
> to BCM2836, with a few modifications to the register offsets, document
> that specific compatible string.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 3/7] irqchip/irq-bcm2835: Add support for 7211 interrupt controller

[Florian Fainelli]

BCM7211 has a number of similarities with BCM2836, except the register
offsets are different and the bank bits are also different, account for
all of these differences.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 86 +++++++++++++++++++++++++++++------
 1 file changed, 72 insertions(+), 14 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 418245d31921..55afc3487723 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -57,19 +57,34 @@
 #define SHORTCUT_SHIFT		10
 #define BANK1_HWIRQ		BIT(8)
 #define BANK2_HWIRQ		BIT(9)
+#define BANK1_HWIRQ_BCM7211	BIT(24)
+#define BANK2_HWIRQ_BCM7211	BIT(25)
 #define BANK0_VALID_MASK	(BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
+#define BANK0_VALID_MASK_BCM7211 (BANK0_HWIRQ_MASK | BANK1_HWIRQ_BCM7211 | \
+				  BANK2_HWIRQ_BCM7211 | SHORTCUT1_MASK | \
+				  SHORTCUT2_MASK)
 
 #define REG_FIQ_CONTROL		0x0c
 
 #define NR_BANKS		3
 #define IRQS_PER_BANK		32
 
+enum armctrl_type {
+	ARMCTRL_BCM2835 = 0,
+	ARMCTRL_BCM2836,
+	ARMCTRL_BCM7211
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
 static const int bank_irqs[] __initconst = { 8, 32, 32 };
 
+static const int reg_pending_bcm7211[] __initconst = { 0x08, 0x00, 0x04 };
+static const int reg_enable_bcm7211[] __initconst = { 0x18, 0x10, 0x14 };
+static const int reg_disable_bcm7211[] __initconst = { 0x28, 0x20, 0x24 };
+
 static const int shortcuts[] = {
 	7, 9, 10, 18, 19,		/* Bank 1 */
 	21, 22, 23, 24, 25, 30		/* Bank 2 */
@@ -87,6 +102,7 @@ static struct armctrl_ic intc __read_mostly;
 static void __exception_irq_entry bcm2835_handle_irq(
 	struct pt_regs *regs);
 static void bcm2836_chained_handle_irq(struct irq_desc *desc);
+static void bcm7211_chained_handle_irq(struct irq_desc *desc);
 
 static void armctrl_mask_irq(struct irq_data *d)
 {
@@ -131,11 +147,14 @@ static const struct irq_domain_ops armctrl_ops = {
 
 static int __init armctrl_of_init(struct device_node *node,
 				  struct device_node *parent,
-				  bool is_2836)
+				  enum armctrl_type type)
 {
 	void __iomem *base;
 	int irq, b, i;
 
+	if (type > ARMCTRL_BCM7211)
+		return -EINVAL;
+
 	base = of_iomap(node, 0);
 	if (!base)
 		panic("%pOF: unable to map IC registers\n", node);
@@ -146,9 +165,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		panic("%pOF: unable to create IRQ domain\n", node);
 
 	for (b = 0; b < NR_BANKS; b++) {
-		intc.pending[b] = base + reg_pending[b];
-		intc.enable[b] = base + reg_enable[b];
-		intc.disable[b] = base + reg_disable[b];
+		if (type <= ARMCTRL_BCM2836) {
+			intc.pending[b] = base + reg_pending[b];
+			intc.enable[b] = base + reg_enable[b];
+			intc.disable[b] = base + reg_disable[b];
+		} else {
+			intc.pending[b] = base + reg_pending_bcm7211[b];
+			intc.enable[b] = base + reg_enable_bcm7211[b];
+			intc.disable[b] = base + reg_disable_bcm7211[b];
+		}
+
+		if (type == ARMCTRL_BCM7211)
+			armctrl_chip.flags |= IRQCHIP_MASK_ON_SUSPEND |
+					      IRQCHIP_SKIP_SET_WAKE;
 
 		for (i = 0; i < bank_irqs[b]; i++) {
 			irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
@@ -159,14 +188,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		}
 	}
 
-	if (is_2836) {
+	if (type >= ARMCTRL_BCM2836) {
 		int parent_irq = irq_of_parse_and_map(node, 0);
 
 		if (!parent_irq) {
 			panic("%pOF: unable to get parent interrupt.\n",
 			      node);
 		}
-		irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
+		if (type == ARMCTRL_BCM2836)
+			irq_set_chained_handler(parent_irq,
+						bcm2836_chained_handle_irq);
+		else
+			irq_set_chained_handler(parent_irq,
+						bcm7211_chained_handle_irq);
 	} else {
 		set_handle_irq(bcm2835_handle_irq);
 	}
@@ -177,13 +211,19 @@ static int __init armctrl_of_init(struct device_node *node,
 static int __init bcm2835_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, false);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2835);
 }
 
 static int __init bcm2836_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, true);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2836);
+}
+
+static int __init bcm7211_armctrl_of_init(struct device_node *node,
+					  struct device_node *parent)
+{
+	return armctrl_of_init(node, parent, ARMCTRL_BCM7211);
 }
 
 
@@ -205,9 +245,11 @@ static u32 armctrl_translate_shortcut(int bank, u32 stat)
 	return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
 }
 
-static u32 get_next_armctrl_hwirq(void)
+static u32 get_next_armctrl_hwirq(u32 valid_mask,
+				  u32 bank1_mask,
+				  u32 bank2_mask)
 {
-	u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
+	u32 stat = readl_relaxed(intc.pending[0]) & valid_mask;
 
 	if (stat == 0)
 		return ~0;
@@ -217,9 +259,9 @@ static u32 get_next_armctrl_hwirq(void)
 		return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
 	else if (stat & SHORTCUT2_MASK)
 		return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
-	else if (stat & BANK1_HWIRQ)
+	else if (stat & bank1_mask)
 		return armctrl_translate_bank(1);
-	else if (stat & BANK2_HWIRQ)
+	else if (stat & bank2_mask)
 		return armctrl_translate_bank(2);
 	else
 		BUG();
@@ -230,7 +272,9 @@ static void __exception_irq_entry bcm2835_handle_irq(
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
 		handle_domain_irq(intc.domain, hwirq, regs);
 }
 
@@ -238,7 +282,19 @@ static void bcm2836_chained_handle_irq(struct irq_desc *desc)
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
+		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
+}
+
+static void bcm7211_chained_handle_irq(struct irq_desc *desc)
+{
+	u32 hwirq;
+
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK_BCM7211,
+					       BANK1_HWIRQ_BCM7211,
+					       BANK2_HWIRQ_BCM7211)) != ~0)
 		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
 }
 
@@ -246,3 +302,5 @@ IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
 		bcm2835_armctrl_of_init);
 IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
 		bcm2836_armctrl_of_init);
+IRQCHIP_DECLARE(bcm7211_armctrl_ic, "brcm,bcm7211-armctrl-ic",
+		bcm7211_armctrl_of_init);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/7] irqchip/irq-bcm2835: Add support for 7211 interrupt controller

[Florian Fainelli]

BCM7211 has a number of similarities with BCM2836, except the register
offsets are different and the bank bits are also different, account for
all of these differences.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 86 +++++++++++++++++++++++++++++------
 1 file changed, 72 insertions(+), 14 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 418245d31921..55afc3487723 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -57,19 +57,34 @@
 #define SHORTCUT_SHIFT		10
 #define BANK1_HWIRQ		BIT(8)
 #define BANK2_HWIRQ		BIT(9)
+#define BANK1_HWIRQ_BCM7211	BIT(24)
+#define BANK2_HWIRQ_BCM7211	BIT(25)
 #define BANK0_VALID_MASK	(BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
+#define BANK0_VALID_MASK_BCM7211 (BANK0_HWIRQ_MASK | BANK1_HWIRQ_BCM7211 | \
+				  BANK2_HWIRQ_BCM7211 | SHORTCUT1_MASK | \
+				  SHORTCUT2_MASK)
 
 #define REG_FIQ_CONTROL		0x0c
 
 #define NR_BANKS		3
 #define IRQS_PER_BANK		32
 
+enum armctrl_type {
+	ARMCTRL_BCM2835 = 0,
+	ARMCTRL_BCM2836,
+	ARMCTRL_BCM7211
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
 static const int bank_irqs[] __initconst = { 8, 32, 32 };
 
+static const int reg_pending_bcm7211[] __initconst = { 0x08, 0x00, 0x04 };
+static const int reg_enable_bcm7211[] __initconst = { 0x18, 0x10, 0x14 };
+static const int reg_disable_bcm7211[] __initconst = { 0x28, 0x20, 0x24 };
+
 static const int shortcuts[] = {
 	7, 9, 10, 18, 19,		/* Bank 1 */
 	21, 22, 23, 24, 25, 30		/* Bank 2 */
@@ -87,6 +102,7 @@ static struct armctrl_ic intc __read_mostly;
 static void __exception_irq_entry bcm2835_handle_irq(
 	struct pt_regs *regs);
 static void bcm2836_chained_handle_irq(struct irq_desc *desc);
+static void bcm7211_chained_handle_irq(struct irq_desc *desc);
 
 static void armctrl_mask_irq(struct irq_data *d)
 {
@@ -131,11 +147,14 @@ static const struct irq_domain_ops armctrl_ops = {
 
 static int __init armctrl_of_init(struct device_node *node,
 				  struct device_node *parent,
-				  bool is_2836)
+				  enum armctrl_type type)
 {
 	void __iomem *base;
 	int irq, b, i;
 
+	if (type > ARMCTRL_BCM7211)
+		return -EINVAL;
+
 	base = of_iomap(node, 0);
 	if (!base)
 		panic("%pOF: unable to map IC registers\n", node);
@@ -146,9 +165,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		panic("%pOF: unable to create IRQ domain\n", node);
 
 	for (b = 0; b < NR_BANKS; b++) {
-		intc.pending[b] = base + reg_pending[b];
-		intc.enable[b] = base + reg_enable[b];
-		intc.disable[b] = base + reg_disable[b];
+		if (type <= ARMCTRL_BCM2836) {
+			intc.pending[b] = base + reg_pending[b];
+			intc.enable[b] = base + reg_enable[b];
+			intc.disable[b] = base + reg_disable[b];
+		} else {
+			intc.pending[b] = base + reg_pending_bcm7211[b];
+			intc.enable[b] = base + reg_enable_bcm7211[b];
+			intc.disable[b] = base + reg_disable_bcm7211[b];
+		}
+
+		if (type == ARMCTRL_BCM7211)
+			armctrl_chip.flags |= IRQCHIP_MASK_ON_SUSPEND |
+					      IRQCHIP_SKIP_SET_WAKE;
 
 		for (i = 0; i < bank_irqs[b]; i++) {
 			irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
@@ -159,14 +188,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		}
 	}
 
-	if (is_2836) {
+	if (type >= ARMCTRL_BCM2836) {
 		int parent_irq = irq_of_parse_and_map(node, 0);
 
 		if (!parent_irq) {
 			panic("%pOF: unable to get parent interrupt.\n",
 			      node);
 		}
-		irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
+		if (type == ARMCTRL_BCM2836)
+			irq_set_chained_handler(parent_irq,
+						bcm2836_chained_handle_irq);
+		else
+			irq_set_chained_handler(parent_irq,
+						bcm7211_chained_handle_irq);
 	} else {
 		set_handle_irq(bcm2835_handle_irq);
 	}
@@ -177,13 +211,19 @@ static int __init armctrl_of_init(struct device_node *node,
 static int __init bcm2835_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, false);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2835);
 }
 
 static int __init bcm2836_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, true);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2836);
+}
+
+static int __init bcm7211_armctrl_of_init(struct device_node *node,
+					  struct device_node *parent)
+{
+	return armctrl_of_init(node, parent, ARMCTRL_BCM7211);
 }
 
 
@@ -205,9 +245,11 @@ static u32 armctrl_translate_shortcut(int bank, u32 stat)
 	return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
 }
 
-static u32 get_next_armctrl_hwirq(void)
+static u32 get_next_armctrl_hwirq(u32 valid_mask,
+				  u32 bank1_mask,
+				  u32 bank2_mask)
 {
-	u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
+	u32 stat = readl_relaxed(intc.pending[0]) & valid_mask;
 
 	if (stat == 0)
 		return ~0;
@@ -217,9 +259,9 @@ static u32 get_next_armctrl_hwirq(void)
 		return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
 	else if (stat & SHORTCUT2_MASK)
 		return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
-	else if (stat & BANK1_HWIRQ)
+	else if (stat & bank1_mask)
 		return armctrl_translate_bank(1);
-	else if (stat & BANK2_HWIRQ)
+	else if (stat & bank2_mask)
 		return armctrl_translate_bank(2);
 	else
 		BUG();
@@ -230,7 +272,9 @@ static void __exception_irq_entry bcm2835_handle_irq(
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
 		handle_domain_irq(intc.domain, hwirq, regs);
 }
 
@@ -238,7 +282,19 @@ static void bcm2836_chained_handle_irq(struct irq_desc *desc)
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
+		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
+}
+
+static void bcm7211_chained_handle_irq(struct irq_desc *desc)
+{
+	u32 hwirq;
+
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK_BCM7211,
+					       BANK1_HWIRQ_BCM7211,
+					       BANK2_HWIRQ_BCM7211)) != ~0)
 		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
 }
 
@@ -246,3 +302,5 @@ IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
 		bcm2835_armctrl_of_init);
 IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
 		bcm2836_armctrl_of_init);
+IRQCHIP_DECLARE(bcm7211_armctrl_ic, "brcm,bcm7211-armctrl-ic",
+		bcm7211_armctrl_of_init);
-- 
2.17.1

[PATCH 3/7] irqchip/irq-bcm2835: Add support for 7211 interrupt controller

[Florian Fainelli]

BCM7211 has a number of similarities with BCM2836, except the register
offsets are different and the bank bits are also different, account for
all of these differences.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 86 +++++++++++++++++++++++++++++------
 1 file changed, 72 insertions(+), 14 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 418245d31921..55afc3487723 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -57,19 +57,34 @@
 #define SHORTCUT_SHIFT		10
 #define BANK1_HWIRQ		BIT(8)
 #define BANK2_HWIRQ		BIT(9)
+#define BANK1_HWIRQ_BCM7211	BIT(24)
+#define BANK2_HWIRQ_BCM7211	BIT(25)
 #define BANK0_VALID_MASK	(BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
+#define BANK0_VALID_MASK_BCM7211 (BANK0_HWIRQ_MASK | BANK1_HWIRQ_BCM7211 | \
+				  BANK2_HWIRQ_BCM7211 | SHORTCUT1_MASK | \
+				  SHORTCUT2_MASK)
 
 #define REG_FIQ_CONTROL		0x0c
 
 #define NR_BANKS		3
 #define IRQS_PER_BANK		32
 
+enum armctrl_type {
+	ARMCTRL_BCM2835 = 0,
+	ARMCTRL_BCM2836,
+	ARMCTRL_BCM7211
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
 static const int bank_irqs[] __initconst = { 8, 32, 32 };
 
+static const int reg_pending_bcm7211[] __initconst = { 0x08, 0x00, 0x04 };
+static const int reg_enable_bcm7211[] __initconst = { 0x18, 0x10, 0x14 };
+static const int reg_disable_bcm7211[] __initconst = { 0x28, 0x20, 0x24 };
+
 static const int shortcuts[] = {
 	7, 9, 10, 18, 19,		/* Bank 1 */
 	21, 22, 23, 24, 25, 30		/* Bank 2 */
@@ -87,6 +102,7 @@ static struct armctrl_ic intc __read_mostly;
 static void __exception_irq_entry bcm2835_handle_irq(
 	struct pt_regs *regs);
 static void bcm2836_chained_handle_irq(struct irq_desc *desc);
+static void bcm7211_chained_handle_irq(struct irq_desc *desc);
 
 static void armctrl_mask_irq(struct irq_data *d)
 {
@@ -131,11 +147,14 @@ static const struct irq_domain_ops armctrl_ops = {
 
 static int __init armctrl_of_init(struct device_node *node,
 				  struct device_node *parent,
-				  bool is_2836)
+				  enum armctrl_type type)
 {
 	void __iomem *base;
 	int irq, b, i;
 
+	if (type > ARMCTRL_BCM7211)
+		return -EINVAL;
+
 	base = of_iomap(node, 0);
 	if (!base)
 		panic("%pOF: unable to map IC registers\n", node);
@@ -146,9 +165,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		panic("%pOF: unable to create IRQ domain\n", node);
 
 	for (b = 0; b < NR_BANKS; b++) {
-		intc.pending[b] = base + reg_pending[b];
-		intc.enable[b] = base + reg_enable[b];
-		intc.disable[b] = base + reg_disable[b];
+		if (type <= ARMCTRL_BCM2836) {
+			intc.pending[b] = base + reg_pending[b];
+			intc.enable[b] = base + reg_enable[b];
+			intc.disable[b] = base + reg_disable[b];
+		} else {
+			intc.pending[b] = base + reg_pending_bcm7211[b];
+			intc.enable[b] = base + reg_enable_bcm7211[b];
+			intc.disable[b] = base + reg_disable_bcm7211[b];
+		}
+
+		if (type == ARMCTRL_BCM7211)
+			armctrl_chip.flags |= IRQCHIP_MASK_ON_SUSPEND |
+					      IRQCHIP_SKIP_SET_WAKE;
 
 		for (i = 0; i < bank_irqs[b]; i++) {
 			irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
@@ -159,14 +188,19 @@ static int __init armctrl_of_init(struct device_node *node,
 		}
 	}
 
-	if (is_2836) {
+	if (type >= ARMCTRL_BCM2836) {
 		int parent_irq = irq_of_parse_and_map(node, 0);
 
 		if (!parent_irq) {
 			panic("%pOF: unable to get parent interrupt.\n",
 			      node);
 		}
-		irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
+		if (type == ARMCTRL_BCM2836)
+			irq_set_chained_handler(parent_irq,
+						bcm2836_chained_handle_irq);
+		else
+			irq_set_chained_handler(parent_irq,
+						bcm7211_chained_handle_irq);
 	} else {
 		set_handle_irq(bcm2835_handle_irq);
 	}
@@ -177,13 +211,19 @@ static int __init armctrl_of_init(struct device_node *node,
 static int __init bcm2835_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, false);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2835);
 }
 
 static int __init bcm2836_armctrl_of_init(struct device_node *node,
 					  struct device_node *parent)
 {
-	return armctrl_of_init(node, parent, true);
+	return armctrl_of_init(node, parent, ARMCTRL_BCM2836);
+}
+
+static int __init bcm7211_armctrl_of_init(struct device_node *node,
+					  struct device_node *parent)
+{
+	return armctrl_of_init(node, parent, ARMCTRL_BCM7211);
 }
 
 
@@ -205,9 +245,11 @@ static u32 armctrl_translate_shortcut(int bank, u32 stat)
 	return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
 }
 
-static u32 get_next_armctrl_hwirq(void)
+static u32 get_next_armctrl_hwirq(u32 valid_mask,
+				  u32 bank1_mask,
+				  u32 bank2_mask)
 {
-	u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
+	u32 stat = readl_relaxed(intc.pending[0]) & valid_mask;
 
 	if (stat == 0)
 		return ~0;
@@ -217,9 +259,9 @@ static u32 get_next_armctrl_hwirq(void)
 		return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
 	else if (stat & SHORTCUT2_MASK)
 		return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
-	else if (stat & BANK1_HWIRQ)
+	else if (stat & bank1_mask)
 		return armctrl_translate_bank(1);
-	else if (stat & BANK2_HWIRQ)
+	else if (stat & bank2_mask)
 		return armctrl_translate_bank(2);
 	else
 		BUG();
@@ -230,7 +272,9 @@ static void __exception_irq_entry bcm2835_handle_irq(
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
 		handle_domain_irq(intc.domain, hwirq, regs);
 }
 
@@ -238,7 +282,19 @@ static void bcm2836_chained_handle_irq(struct irq_desc *desc)
 {
 	u32 hwirq;
 
-	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK,
+					       BANK1_HWIRQ,
+					       BANK2_HWIRQ)) != ~0)
+		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
+}
+
+static void bcm7211_chained_handle_irq(struct irq_desc *desc)
+{
+	u32 hwirq;
+
+	while ((hwirq = get_next_armctrl_hwirq(BANK0_VALID_MASK_BCM7211,
+					       BANK1_HWIRQ_BCM7211,
+					       BANK2_HWIRQ_BCM7211)) != ~0)
 		generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
 }
 
@@ -246,3 +302,5 @@ IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
 		bcm2835_armctrl_of_init);
 IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
 		bcm2836_armctrl_of_init);
+IRQCHIP_DECLARE(bcm7211_armctrl_ic, "brcm,bcm7211-armctrl-ic",
+		bcm7211_armctrl_of_init);
-- 
2.17.1

[PATCH 4/7] dt-bindings: interrupt-controller: Add brcm, bcm7211-l1-intc binding

[Florian Fainelli]

BCM7211 uses a very similar root interrupt controller than what exists on
BCM2836, define a specific compatible string to key off specific
behavior.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index 8ced1696c325..13bef028d6ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -7,7 +7,9 @@ controller.
 
 Required properties:
 
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- compatible:	 	Should be one of
+			"brcm,bcm2836-l1-intc"
+			"brcm,bcm7211-l1-intc"
 - reg:			Specifies base physical address and size of the
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding

[Florian Fainelli]

BCM7211 uses a very similar root interrupt controller than what exists on
BCM2836, define a specific compatible string to key off specific
behavior.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index 8ced1696c325..13bef028d6ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -7,7 +7,9 @@ controller.
 
 Required properties:
 
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- compatible:	 	Should be one of
+			"brcm,bcm2836-l1-intc"
+			"brcm,bcm7211-l1-intc"
 - reg:			Specifies base physical address and size of the
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
-- 
2.17.1

[PATCH 4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding

[Florian Fainelli]

BCM7211 uses a very similar root interrupt controller than what exists on
BCM2836, define a specific compatible string to key off specific
behavior.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index 8ced1696c325..13bef028d6ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -7,7 +7,9 @@ controller.
 
 Required properties:
 
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- compatible:	 	Should be one of
+			"brcm,bcm2836-l1-intc"
+			"brcm,bcm7211-l1-intc"
 - reg:			Specifies base physical address and size of the
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
-- 
2.17.1

Re: [PATCH 4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding

[Rob Herring]

On Tue,  1 Oct 2019 15:48:39 -0700, Florian Fainelli wrote:
> BCM7211 uses a very similar root interrupt controller than what exists on
> BCM2836, define a specific compatible string to key off specific
> behavior.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding

[Rob Herring]

On Tue,  1 Oct 2019 15:48:39 -0700, Florian Fainelli wrote:
> BCM7211 uses a very similar root interrupt controller than what exists on
> BCM2836, define a specific compatible string to key off specific
> behavior.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Florian Fainelli]

The root interrupt controller on 7211 is about identical to the one
existing on BCM2836, except that the SMP cross call are done through the
standard ARM GIC-400 interrupt controller. This interrupt controller is
used for side band wake-up signals though.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 2038693f074c..77fa395c8f6b 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
 		return -EINVAL;
 	}
 
+	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
 	irq_set_percpu_devid(irq);
 	irq_domain_set_info(d, irq, hw, chip, d->host_data,
 			    handle_percpu_devid_irq, NULL, NULL);
@@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
 	writel(0x80000000, intc.base + LOCAL_PRESCALER);
 }
 
-static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
-						      struct device_node *parent)
+static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
+						  struct device_node *parent,
+						  bool smp_init)
 {
 	intc.base = of_iomap(node, 0);
 	if (!intc.base) {
@@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
 	if (!intc.domain)
 		panic("%pOF: unable to create IRQ domain\n", node);
 
-	bcm2836_arm_irqchip_smp_init();
+	if (smp_init)
+		bcm2836_arm_irqchip_smp_init();
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
+
 	return 0;
 }
 
+static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
+}
+
+static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
+}
+
 IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
 		bcm2836_arm_irqchip_l1_intc_of_init);
+IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
+		bcm7211_arm_irqchip_l1_intc_of_init);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Florian Fainelli]

The root interrupt controller on 7211 is about identical to the one
existing on BCM2836, except that the SMP cross call are done through the
standard ARM GIC-400 interrupt controller. This interrupt controller is
used for side band wake-up signals though.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 2038693f074c..77fa395c8f6b 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
 		return -EINVAL;
 	}
 
+	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
 	irq_set_percpu_devid(irq);
 	irq_domain_set_info(d, irq, hw, chip, d->host_data,
 			    handle_percpu_devid_irq, NULL, NULL);
@@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
 	writel(0x80000000, intc.base + LOCAL_PRESCALER);
 }
 
-static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
-						      struct device_node *parent)
+static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
+						  struct device_node *parent,
+						  bool smp_init)
 {
 	intc.base = of_iomap(node, 0);
 	if (!intc.base) {
@@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
 	if (!intc.domain)
 		panic("%pOF: unable to create IRQ domain\n", node);
 
-	bcm2836_arm_irqchip_smp_init();
+	if (smp_init)
+		bcm2836_arm_irqchip_smp_init();
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
+
 	return 0;
 }
 
+static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
+}
+
+static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
+}
+
 IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
 		bcm2836_arm_irqchip_l1_intc_of_init);
+IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
+		bcm7211_arm_irqchip_l1_intc_of_init);
-- 
2.17.1

[PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Florian Fainelli]

The root interrupt controller on 7211 is about identical to the one
existing on BCM2836, except that the SMP cross call are done through the
standard ARM GIC-400 interrupt controller. This interrupt controller is
used for side band wake-up signals though.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 2038693f074c..77fa395c8f6b 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
 		return -EINVAL;
 	}
 
+	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
 	irq_set_percpu_devid(irq);
 	irq_domain_set_info(d, irq, hw, chip, d->host_data,
 			    handle_percpu_devid_irq, NULL, NULL);
@@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
 	writel(0x80000000, intc.base + LOCAL_PRESCALER);
 }
 
-static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
-						      struct device_node *parent)
+static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
+						  struct device_node *parent,
+						  bool smp_init)
 {
 	intc.base = of_iomap(node, 0);
 	if (!intc.base) {
@@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
 	if (!intc.domain)
 		panic("%pOF: unable to create IRQ domain\n", node);
 
-	bcm2836_arm_irqchip_smp_init();
+	if (smp_init)
+		bcm2836_arm_irqchip_smp_init();
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
+
 	return 0;
 }
 
+static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
+}
+
+static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
+						      struct device_node *parent)
+{
+	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
+}
+
 IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
 		bcm2836_arm_irqchip_l1_intc_of_init);
+IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
+		bcm7211_arm_irqchip_l1_intc_of_init);
-- 
2.17.1

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Marc Zyngier]

On Tue,  1 Oct 2019 15:48:40 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> The root interrupt controller on 7211 is about identical to the one
> existing on BCM2836, except that the SMP cross call are done through the
> standard ARM GIC-400 interrupt controller. This interrupt controller is
> used for side band wake-up signals though.

I don't fully grasp how this thing works.

If the 7211 interrupt controller is root and the GIC is used for SGIs,
this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
connected to individual inputs to the 7211 controller. Seems totally
braindead, and unexpectedly so.

If the GIC is root and the 7211 outputs into the GIC all of its
interrupts as a secondary irqchip, it would at least match an existing
(and pretty bad) pattern.

So which one of the two is it?

> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
> index 2038693f074c..77fa395c8f6b 100644
> --- a/drivers/irqchip/irq-bcm2836.c
> +++ b/drivers/irqchip/irq-bcm2836.c
> @@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
>  		return -EINVAL;
>  	}
>  
> +	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
> +
>  	irq_set_percpu_devid(irq);
>  	irq_domain_set_info(d, irq, hw, chip, d->host_data,
>  			    handle_percpu_devid_irq, NULL, NULL);
> @@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
>  	writel(0x80000000, intc.base + LOCAL_PRESCALER);
>  }
>  
> -static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> -						      struct device_node *parent)
> +static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
> +						  struct device_node *parent,
> +						  bool smp_init)
>  {
>  	intc.base = of_iomap(node, 0);
>  	if (!intc.base) {
> @@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>  	if (!intc.domain)
>  		panic("%pOF: unable to create IRQ domain\n", node);
>  
> -	bcm2836_arm_irqchip_smp_init();
> +	if (smp_init)
> +		bcm2836_arm_irqchip_smp_init();

Instead of the additional parameter and this check, why don't you just
move the smp_init() call to bcm2836_arm_irqchip_l1_intc_of_init()
instead?

>  
>  	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
> +
>  	return 0;
>  }
>  
> +static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
> +}
> +
> +static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
> +}
> +
>  IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
>  		bcm2836_arm_irqchip_l1_intc_of_init);
> +IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
> +		bcm7211_arm_irqchip_l1_intc_of_init);


Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Marc Zyngier]

On Tue,  1 Oct 2019 15:48:40 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> The root interrupt controller on 7211 is about identical to the one
> existing on BCM2836, except that the SMP cross call are done through the
> standard ARM GIC-400 interrupt controller. This interrupt controller is
> used for side band wake-up signals though.

I don't fully grasp how this thing works.

If the 7211 interrupt controller is root and the GIC is used for SGIs,
this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
connected to individual inputs to the 7211 controller. Seems totally
braindead, and unexpectedly so.

If the GIC is root and the 7211 outputs into the GIC all of its
interrupts as a secondary irqchip, it would at least match an existing
(and pretty bad) pattern.

So which one of the two is it?

> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
> index 2038693f074c..77fa395c8f6b 100644
> --- a/drivers/irqchip/irq-bcm2836.c
> +++ b/drivers/irqchip/irq-bcm2836.c
> @@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
>  		return -EINVAL;
>  	}
>  
> +	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
> +
>  	irq_set_percpu_devid(irq);
>  	irq_domain_set_info(d, irq, hw, chip, d->host_data,
>  			    handle_percpu_devid_irq, NULL, NULL);
> @@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
>  	writel(0x80000000, intc.base + LOCAL_PRESCALER);
>  }
>  
> -static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> -						      struct device_node *parent)
> +static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
> +						  struct device_node *parent,
> +						  bool smp_init)
>  {
>  	intc.base = of_iomap(node, 0);
>  	if (!intc.base) {
> @@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>  	if (!intc.domain)
>  		panic("%pOF: unable to create IRQ domain\n", node);
>  
> -	bcm2836_arm_irqchip_smp_init();
> +	if (smp_init)
> +		bcm2836_arm_irqchip_smp_init();

Instead of the additional parameter and this check, why don't you just
move the smp_init() call to bcm2836_arm_irqchip_l1_intc_of_init()
instead?

>  
>  	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
> +
>  	return 0;
>  }
>  
> +static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
> +}
> +
> +static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
> +}
> +
>  IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
>  		bcm2836_arm_irqchip_l1_intc_of_init);
> +IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
> +		bcm7211_arm_irqchip_l1_intc_of_init);


Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Marc Zyngier]

On Tue,  1 Oct 2019 15:48:40 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> The root interrupt controller on 7211 is about identical to the one
> existing on BCM2836, except that the SMP cross call are done through the
> standard ARM GIC-400 interrupt controller. This interrupt controller is
> used for side band wake-up signals though.

I don't fully grasp how this thing works.

If the 7211 interrupt controller is root and the GIC is used for SGIs,
this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
connected to individual inputs to the 7211 controller. Seems totally
braindead, and unexpectedly so.

If the GIC is root and the 7211 outputs into the GIC all of its
interrupts as a secondary irqchip, it would at least match an existing
(and pretty bad) pattern.

So which one of the two is it?

> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
> index 2038693f074c..77fa395c8f6b 100644
> --- a/drivers/irqchip/irq-bcm2836.c
> +++ b/drivers/irqchip/irq-bcm2836.c
> @@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
>  		return -EINVAL;
>  	}
>  
> +	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
> +
>  	irq_set_percpu_devid(irq);
>  	irq_domain_set_info(d, irq, hw, chip, d->host_data,
>  			    handle_percpu_devid_irq, NULL, NULL);
> @@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
>  	writel(0x80000000, intc.base + LOCAL_PRESCALER);
>  }
>  
> -static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> -						      struct device_node *parent)
> +static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
> +						  struct device_node *parent,
> +						  bool smp_init)
>  {
>  	intc.base = of_iomap(node, 0);
>  	if (!intc.base) {
> @@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>  	if (!intc.domain)
>  		panic("%pOF: unable to create IRQ domain\n", node);
>  
> -	bcm2836_arm_irqchip_smp_init();
> +	if (smp_init)
> +		bcm2836_arm_irqchip_smp_init();

Instead of the additional parameter and this check, why don't you just
move the smp_init() call to bcm2836_arm_irqchip_l1_intc_of_init()
instead?

>  
>  	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
> +
>  	return 0;
>  }
>  
> +static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, true);
> +}
> +
> +static int __init bcm7211_arm_irqchip_l1_intc_of_init(struct device_node *node,
> +						      struct device_node *parent)
> +{
> +	return arm_irqchip_l1_intc_of_init_smp(node, parent, false);
> +}
> +
>  IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
>  		bcm2836_arm_irqchip_l1_intc_of_init);
> +IRQCHIP_DECLARE(bcm7211_arm_irqchip_l1_intc, "brcm,bcm7211-l1-intc",
> +		bcm7211_arm_irqchip_l1_intc_of_init);


Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Florian Fainelli]

On 10/2/19 5:40 AM, Marc Zyngier wrote:
> On Tue,  1 Oct 2019 15:48:40 -0700
> Florian Fainelli <f.fainelli@gmail.com> wrote:
> 
>> The root interrupt controller on 7211 is about identical to the one
>> existing on BCM2836, except that the SMP cross call are done through the
>> standard ARM GIC-400 interrupt controller. This interrupt controller is
>> used for side band wake-up signals though.
> 
> I don't fully grasp how this thing works.
> 
> If the 7211 interrupt controller is root and the GIC is used for SGIs,
> this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
> connected to individual inputs to the 7211 controller. Seems totally
> braindead, and unexpectedly so.
> 
> If the GIC is root and the 7211 outputs into the GIC all of its
> interrupts as a secondary irqchip, it would at least match an existing
> (and pretty bad) pattern.
> 
> So which one of the two is it?

The nominal configuration on 7211 is to have all interrupts go through
the ARM GIC. It is possible however, to fallback to the legacy 2836 mode
whereby the root interrupt controller for peripheral interrupts is this
ARMCTL IC. There is a mux that the firmware can control which will
dictate which root interrupt controller is used for peripherals.

I have used this mostly for silicon verification and since those are
fairly harmless patches, just decided to send them out to avoid
maintaining them out of tree.

We have a plan to use those as an "alternate" interrupt domain for low
power modes and use the fact that peripheral interrupts could be active
in both domains (GIC and ARMCTRL IC) to help support configuring and
identifying wake-up sources fro m within Linux.

Thanks!

> 
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>  drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
>>  1 file changed, 22 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
>> index 2038693f074c..77fa395c8f6b 100644
>> --- a/drivers/irqchip/irq-bcm2836.c
>> +++ b/drivers/irqchip/irq-bcm2836.c
>> @@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
>>  		return -EINVAL;
>>  	}
>>  
>> +	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
>> +
>>  	irq_set_percpu_devid(irq);
>>  	irq_domain_set_info(d, irq, hw, chip, d->host_data,
>>  			    handle_percpu_devid_irq, NULL, NULL);
>> @@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
>>  	writel(0x80000000, intc.base + LOCAL_PRESCALER);
>>  }
>>  
>> -static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>> -						      struct device_node *parent)
>> +static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
>> +						  struct device_node *parent,
>> +						  bool smp_init)
>>  {
>>  	intc.base = of_iomap(node, 0);
>>  	if (!intc.base) {
>> @@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>>  	if (!intc.domain)
>>  		panic("%pOF: unable to create IRQ domain\n", node);
>>  
>> -	bcm2836_arm_irqchip_smp_init();
>> +	if (smp_init)
>> +		bcm2836_arm_irqchip_smp_init();
> 
> Instead of the additional parameter and this check, why don't you just
> move the smp_init() call to bcm2836_arm_irqchip_l1_intc_of_init()
> instead?

Good idea, will do.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Florian Fainelli]

On 10/2/19 5:40 AM, Marc Zyngier wrote:
> On Tue,  1 Oct 2019 15:48:40 -0700
> Florian Fainelli <f.fainelli@gmail.com> wrote:
> 
>> The root interrupt controller on 7211 is about identical to the one
>> existing on BCM2836, except that the SMP cross call are done through the
>> standard ARM GIC-400 interrupt controller. This interrupt controller is
>> used for side band wake-up signals though.
> 
> I don't fully grasp how this thing works.
> 
> If the 7211 interrupt controller is root and the GIC is used for SGIs,
> this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
> connected to individual inputs to the 7211 controller. Seems totally
> braindead, and unexpectedly so.
> 
> If the GIC is root and the 7211 outputs into the GIC all of its
> interrupts as a secondary irqchip, it would at least match an existing
> (and pretty bad) pattern.
> 
> So which one of the two is it?

The nominal configuration on 7211 is to have all interrupts go through
the ARM GIC. It is possible however, to fallback to the legacy 2836 mode
whereby the root interrupt controller for peripheral interrupts is this
ARMCTL IC. There is a mux that the firmware can control which will
dictate which root interrupt controller is used for peripherals.

I have used this mostly for silicon verification and since those are
fairly harmless patches, just decided to send them out to avoid
maintaining them out of tree.

We have a plan to use those as an "alternate" interrupt domain for low
power modes and use the fact that peripheral interrupts could be active
in both domains (GIC and ARMCTRL IC) to help support configuring and
identifying wake-up sources fro m within Linux.

Thanks!

> 
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>  drivers/irqchip/irq-bcm2836.c | 25 ++++++++++++++++++++++---
>>  1 file changed, 22 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
>> index 2038693f074c..77fa395c8f6b 100644
>> --- a/drivers/irqchip/irq-bcm2836.c
>> +++ b/drivers/irqchip/irq-bcm2836.c
>> @@ -112,6 +112,8 @@ static int bcm2836_map(struct irq_domain *d, unsigned int irq,
>>  		return -EINVAL;
>>  	}
>>  
>> +	chip->flags |= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
>> +
>>  	irq_set_percpu_devid(irq);
>>  	irq_domain_set_info(d, irq, hw, chip, d->host_data,
>>  			    handle_percpu_devid_irq, NULL, NULL);
>> @@ -216,8 +218,9 @@ static void bcm2835_init_local_timer_frequency(void)
>>  	writel(0x80000000, intc.base + LOCAL_PRESCALER);
>>  }
>>  
>> -static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>> -						      struct device_node *parent)
>> +static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
>> +						  struct device_node *parent,
>> +						  bool smp_init)
>>  {
>>  	intc.base = of_iomap(node, 0);
>>  	if (!intc.base) {
>> @@ -232,11 +235,27 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
>>  	if (!intc.domain)
>>  		panic("%pOF: unable to create IRQ domain\n", node);
>>  
>> -	bcm2836_arm_irqchip_smp_init();
>> +	if (smp_init)
>> +		bcm2836_arm_irqchip_smp_init();
> 
> Instead of the additional parameter and this check, why don't you just
> move the smp_init() call to bcm2836_arm_irqchip_l1_intc_of_init()
> instead?

Good idea, will do.
-- 
Florian

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Marc Zyngier]

On Wed, 2 Oct 2019 10:06:31 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> On 10/2/19 5:40 AM, Marc Zyngier wrote:
> > On Tue,  1 Oct 2019 15:48:40 -0700
> > Florian Fainelli <f.fainelli@gmail.com> wrote:
> >   
> >> The root interrupt controller on 7211 is about identical to the one
> >> existing on BCM2836, except that the SMP cross call are done through the
> >> standard ARM GIC-400 interrupt controller. This interrupt controller is
> >> used for side band wake-up signals though.  
> > 
> > I don't fully grasp how this thing works.
> > 
> > If the 7211 interrupt controller is root and the GIC is used for SGIs,
> > this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
> > connected to individual inputs to the 7211 controller. Seems totally
> > braindead, and unexpectedly so.
> > 
> > If the GIC is root and the 7211 outputs into the GIC all of its
> > interrupts as a secondary irqchip, it would at least match an existing
> > (and pretty bad) pattern.
> > 
> > So which one of the two is it?  
> 
> The nominal configuration on 7211 is to have all interrupts go through
> the ARM GIC. It is possible however, to fallback to the legacy 2836 mode
> whereby the root interrupt controller for peripheral interrupts is this
> ARMCTL IC. There is a mux that the firmware can control which will
> dictate which root interrupt controller is used for peripherals.
> 
> I have used this mostly for silicon verification and since those are
> fairly harmless patches, just decided to send them out to avoid
> maintaining them out of tree.

This doesn't really answer my question. What I understand is that your
system is laid out like this:

     DEVICES -> ARMCTL -> CPUs
                  ^
                 GIC

How are the various GIC outputs mapped into the ARMCTL? It has 4 of
them per CPU (IRQ/FIQ + vIRQ/vFIQ), which the ARMCTL must somehow map
to its own interrupts, specially if you want to signal IPIs using the
GIC's SGIs (to which you hint in the commit log).

There is a link I'm missing here.

> We have a plan to use those as an "alternate" interrupt domain for low
> power modes and use the fact that peripheral interrupts could be active
> in both domains (GIC and ARMCTRL IC) to help support configuring and
> identifying wake-up sources fro m within Linux.

That's usually done with a hierarchy, where the ARMCTL IC would be a
child of the GIC and see all interrupt configuration calls before they
reach the GIC driver. We have plenty of examples in the tree already.

Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller

[Marc Zyngier]

On Wed, 2 Oct 2019 10:06:31 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> On 10/2/19 5:40 AM, Marc Zyngier wrote:
> > On Tue,  1 Oct 2019 15:48:40 -0700
> > Florian Fainelli <f.fainelli@gmail.com> wrote:
> >   
> >> The root interrupt controller on 7211 is about identical to the one
> >> existing on BCM2836, except that the SMP cross call are done through the
> >> standard ARM GIC-400 interrupt controller. This interrupt controller is
> >> used for side band wake-up signals though.  
> > 
> > I don't fully grasp how this thing works.
> > 
> > If the 7211 interrupt controller is root and the GIC is used for SGIs,
> > this means that the GIC outputs (IRQ/FIQ/VIRQ/VFIQ, times eight) are
> > connected to individual inputs to the 7211 controller. Seems totally
> > braindead, and unexpectedly so.
> > 
> > If the GIC is root and the 7211 outputs into the GIC all of its
> > interrupts as a secondary irqchip, it would at least match an existing
> > (and pretty bad) pattern.
> > 
> > So which one of the two is it?  
> 
> The nominal configuration on 7211 is to have all interrupts go through
> the ARM GIC. It is possible however, to fallback to the legacy 2836 mode
> whereby the root interrupt controller for peripheral interrupts is this
> ARMCTL IC. There is a mux that the firmware can control which will
> dictate which root interrupt controller is used for peripherals.
> 
> I have used this mostly for silicon verification and since those are
> fairly harmless patches, just decided to send them out to avoid
> maintaining them out of tree.

This doesn't really answer my question. What I understand is that your
system is laid out like this:

     DEVICES -> ARMCTL -> CPUs
                  ^
                 GIC

How are the various GIC outputs mapped into the ARMCTL? It has 4 of
them per CPU (IRQ/FIQ + vIRQ/vFIQ), which the ARMCTL must somehow map
to its own interrupts, specially if you want to signal IPIs using the
GIC's SGIs (to which you hint in the commit log).

There is a link I'm missing here.

> We have a plan to use those as an "alternate" interrupt domain for low
> power modes and use the fact that peripheral interrupts could be active
> in both domains (GIC and ARMCTRL IC) to help support configuring and
> identifying wake-up sources fro m within Linux.

That's usually done with a hierarchy, where the ARMCTL IC would be a
child of the GIC and see all interrupt configuration calls before they
reach the GIC driver. We have plenty of examples in the tree already.

Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

[PATCH 6/7] irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB

[Florian Fainelli]

Now that irq-bcm2835.c and irq-bcm2836.c have been updated to support
BCM7211 which is under ARCH_BRCMSTB, build both drivers for
ARCH_BRCMSTB.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d1bb20d23d27..ffd5f986172a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -116,7 +116,7 @@ config I8259
 config BCM283X_IRQ
 	bool
 	select IRQ_DOMAIN
-	default ARCH_BCM2835
+	default ARCH_BCM2835 || ARCH_BRCMSTB
 
 config BCM6345_L1_IRQ
 	bool
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/7] irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB

[Florian Fainelli]

Now that irq-bcm2835.c and irq-bcm2836.c have been updated to support
BCM7211 which is under ARCH_BRCMSTB, build both drivers for
ARCH_BRCMSTB.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d1bb20d23d27..ffd5f986172a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -116,7 +116,7 @@ config I8259
 config BCM283X_IRQ
 	bool
 	select IRQ_DOMAIN
-	default ARCH_BCM2835
+	default ARCH_BCM2835 || ARCH_BRCMSTB
 
 config BCM6345_L1_IRQ
 	bool
-- 
2.17.1

[PATCH 6/7] irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB

[Florian Fainelli]

Now that irq-bcm2835.c and irq-bcm2836.c have been updated to support
BCM7211 which is under ARCH_BRCMSTB, build both drivers for
ARCH_BRCMSTB.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d1bb20d23d27..ffd5f986172a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -116,7 +116,7 @@ config I8259
 config BCM283X_IRQ
 	bool
 	select IRQ_DOMAIN
-	default ARCH_BCM2835
+	default ARCH_BCM2835 || ARCH_BRCMSTB
 
 config BCM6345_L1_IRQ
 	bool
-- 
2.17.1

[PATCH 7/7] irqchip/irq-bcm283x: Add registration prints

[Florian Fainelli]

With many different kind of interrupt controllers available and used on
7211, add prints to help determine which ones are registered.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 9 +++++++++
 drivers/irqchip/irq-bcm2836.c | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 55afc3487723..ae23e9ec86d0 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -76,6 +76,12 @@ enum armctrl_type {
 	ARMCTRL_BCM7211
 };
 
+static const char *armctrl_type_str[] = {
+	[ARMCTRL_BCM2835] = "BCM2835",
+	[ARMCTRL_BCM2836] = "BCM2836",
+	[ARMCTRL_BCM7211] = "BCM7211",
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
@@ -205,6 +211,9 @@ static int __init armctrl_of_init(struct device_node *node,
 		set_handle_irq(bcm2835_handle_irq);
 	}
 
+	pr_info("registered %s intc (%pOF)\n", armctrl_type_str[type],
+		node);
+
 	return 0;
 }
 
diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 77fa395c8f6b..b159dc91919d 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -240,6 +240,8 @@ static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
 
+	pr_info("Registered BCM2836 intc (%s)\n", node->full_name);
+
 	return 0;
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/7] irqchip/irq-bcm283x: Add registration prints

[Florian Fainelli]

With many different kind of interrupt controllers available and used on
7211, add prints to help determine which ones are registered.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 9 +++++++++
 drivers/irqchip/irq-bcm2836.c | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 55afc3487723..ae23e9ec86d0 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -76,6 +76,12 @@ enum armctrl_type {
 	ARMCTRL_BCM7211
 };
 
+static const char *armctrl_type_str[] = {
+	[ARMCTRL_BCM2835] = "BCM2835",
+	[ARMCTRL_BCM2836] = "BCM2836",
+	[ARMCTRL_BCM7211] = "BCM7211",
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
@@ -205,6 +211,9 @@ static int __init armctrl_of_init(struct device_node *node,
 		set_handle_irq(bcm2835_handle_irq);
 	}
 
+	pr_info("registered %s intc (%pOF)\n", armctrl_type_str[type],
+		node);
+
 	return 0;
 }
 
diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 77fa395c8f6b..b159dc91919d 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -240,6 +240,8 @@ static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
 
+	pr_info("Registered BCM2836 intc (%s)\n", node->full_name);
+
 	return 0;
 }
 
-- 
2.17.1

[PATCH 7/7] irqchip/irq-bcm283x: Add registration prints

[Florian Fainelli]

With many different kind of interrupt controllers available and used on
7211, add prints to help determine which ones are registered.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm2835.c | 9 +++++++++
 drivers/irqchip/irq-bcm2836.c | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 55afc3487723..ae23e9ec86d0 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -76,6 +76,12 @@ enum armctrl_type {
 	ARMCTRL_BCM7211
 };
 
+static const char *armctrl_type_str[] = {
+	[ARMCTRL_BCM2835] = "BCM2835",
+	[ARMCTRL_BCM2836] = "BCM2836",
+	[ARMCTRL_BCM7211] = "BCM7211",
+};
+
 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
@@ -205,6 +211,9 @@ static int __init armctrl_of_init(struct device_node *node,
 		set_handle_irq(bcm2835_handle_irq);
 	}
 
+	pr_info("registered %s intc (%pOF)\n", armctrl_type_str[type],
+		node);
+
 	return 0;
 }
 
diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 77fa395c8f6b..b159dc91919d 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -240,6 +240,8 @@ static int __init arm_irqchip_l1_intc_of_init_smp(struct device_node *node,
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
 
+	pr_info("Registered BCM2836 intc (%s)\n", node->full_name);
+
 	return 0;
 }
 
-- 
2.17.1

[PATCH 0/7] irqchip/irq-bcm283x update for BCM7211

[Florian Fainelli]

Hi Marc, Jason, Thomas,

This patch series updates the BCM2835 and BCM2836 interrupt controller
drivers to support BCM7211 which can make use of those drivers in some
configurations where the ARM GIC is muxed out and the legacy ARM
interrupt controller is used instead.

Thank you!

Florian Fainelli (7):
  irqchip: Introduce Kconfig symbol to build irq-bcm283x.c
  dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding
  irqchip/irq-bcm2835: Add support for 7211 interrupt controller
  dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding
  irqchip/irq-bcm2836: Add support for the 7211 interrupt controller
  irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB
  irqchip/irq-bcm283x: Add registration prints

 .../brcm,bcm2835-armctrl-ic.txt               |  6 +-
 .../brcm,bcm2836-l1-intc.txt                  |  4 +-
 drivers/irqchip/Kconfig                       |  5 +
 drivers/irqchip/Makefile                      |  4 +-
 drivers/irqchip/irq-bcm2835.c                 | 95 ++++++++++++++++---
 drivers/irqchip/irq-bcm2836.c                 | 27 +++++-
 6 files changed, 119 insertions(+), 22 deletions(-)

-- 
2.17.1

[PATCH 2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding

[Florian Fainelli]

BCM7211 features a second level interrupt controller similar in nature
to BCM2836, with a few modifications to the register offsets, document
that specific compatible string.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../interrupt-controller/brcm,bcm2835-armctrl-ic.txt        | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 0f1af5a1c12e..0b07845b46e4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -12,7 +12,8 @@ interrupt there indicates that the ARMCTRL has an interrupt to handle.
 Required properties:
 
 - compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
+                 "brcm,bcm2836-armctrl-ic" or
+		 "brcm,bcm7211-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -25,7 +26,8 @@ Required properties:
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
-Additional required properties for brcm,bcm2836-armctrl-ic:
+Additional required properties for brcm,bcm2836-armctrl-ic and
+brcm,bcm7211-armctrl-ic:
 - interrupts : Specifies the interrupt on the parent for this interrupt
   controller to handle.
 
-- 
2.17.1