* [PATCH 2/3] ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series
2019-10-22 7:21 [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices yegorslists
@ 2019-10-22 7:21 ` yegorslists
2019-10-22 7:21 ` [PATCH 3/3] ARM: dts: add DTS for NetCom Plus 4xx and 8xx " yegorslists
2019-10-23 16:43 ` [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices Tony Lindgren
2 siblings, 0 replies; 4+ messages in thread
From: yegorslists @ 2019-10-22 7:21 UTC (permalink / raw)
To: linux-omap
Cc: tony, robh+dt, devicetree, mark.rutland, bcousson, Yegor Yefremov
From: Yegor Yefremov <yegorslists@googlemail.com>
This DTS file covers all one and two port NetCom Plus devices.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 95 ++++++++++++++++++++
2 files changed, 96 insertions(+)
create mode 100644 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a92576e17133..05dae516930c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -754,6 +754,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-netcan-plus-1xx.dtb \
+ am335x-netcom-plus-2xx.dtb \
am335x-pdu001.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
new file mode 100644
index 000000000000..9a6cd8ef821f
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <2>;
+ phy-handle = <&phy1>;
+};
--
2.17.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series
2019-10-22 7:21 [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices yegorslists
2019-10-22 7:21 ` [PATCH 2/3] ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series yegorslists
@ 2019-10-22 7:21 ` yegorslists
2019-10-23 16:43 ` [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices Tony Lindgren
2 siblings, 0 replies; 4+ messages in thread
From: yegorslists @ 2019-10-22 7:21 UTC (permalink / raw)
To: linux-omap
Cc: tony, robh+dt, devicetree, mark.rutland, bcousson, Yegor Yefremov
From: Yegor Yefremov <yegorslists@googlemail.com>
This DTS file covers all four and eight port NetCom Plus devices.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 115 +++++++++++++++++++
2 files changed, 116 insertions(+)
create mode 100644 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05dae516930c..5b0232c45a97 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -755,6 +755,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-nano.dtb \
am335x-netcan-plus-1xx.dtb \
am335x-netcom-plus-2xx.dtb \
+ am335x-netcom-plus-8xx.dtb \
am335x-pdu001.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
new file mode 100644
index 000000000000..2298563f7334
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+ model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dip_switches>;
+
+ dip_switches: pinmux_dip_switches {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ tca6416_pins: pinmux_tca6416_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&i2c1 {
+ tca6416a: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416b: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tca6416c: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <2>;
+ phy-handle = <&phy1>;
+};
--
2.17.0
^ permalink raw reply related [flat|nested] 4+ messages in thread