All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535
@ 2019-10-16  9:22 ` Gilles DOFFE
  0 siblings, 0 replies; 4+ messages in thread
From: Gilles DOFFE @ 2019-10-16  9:22 UTC (permalink / raw)
  To: devicetree
  Cc: Mark Rutland, Fabio Estevam, Sascha Hauer, rennes, linux-kernel,
	Rob Herring, NXP Linux Team, Pengutronix Kernel Team,
	jerome.oufella, Shawn Guo, linux-arm-kernel

The pca9535 gpio expander is present on the Rex baseboard, but missing
from the dtsi.
The pca9535 is on i2c2 bus which is common to the three SOM
variants (Basic/Pro/Ultra), thus it is activated by default.

Add also the new gpio controller and the associated interrupt line
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.

Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
---
 arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 97f1659144ea..305b57fadc60 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -132,6 +132,19 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	eeprom@57 {
 		compatible = "atmel,24c02";
 		reg = <0x57>;
@@ -237,6 +250,12 @@
 			>;
 		};
 
+		pinctrl_pca9535: pca9535 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+		   >;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535
@ 2019-10-16  9:22 ` Gilles DOFFE
  0 siblings, 0 replies; 4+ messages in thread
From: Gilles DOFFE @ 2019-10-16  9:22 UTC (permalink / raw)
  To: devicetree
  Cc: jerome.oufella, rennes, Rob Herring, Mark Rutland, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, linux-arm-kernel, linux-kernel

The pca9535 gpio expander is present on the Rex baseboard, but missing
from the dtsi.
The pca9535 is on i2c2 bus which is common to the three SOM
variants (Basic/Pro/Ultra), thus it is activated by default.

Add also the new gpio controller and the associated interrupt line
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.

Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
---
 arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 97f1659144ea..305b57fadc60 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -132,6 +132,19 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	eeprom@57 {
 		compatible = "atmel,24c02";
 		reg = <0x57>;
@@ -237,6 +250,12 @@
 			>;
 		};
 
+		pinctrl_pca9535: pca9535 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+		   >;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535
  2019-10-16  9:22 ` Gilles DOFFE
@ 2019-10-26 12:26   ` Shawn Guo
  -1 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2019-10-26 12:26 UTC (permalink / raw)
  To: Gilles DOFFE
  Cc: Mark Rutland, devicetree, Sascha Hauer, rennes, linux-kernel,
	Rob Herring, NXP Linux Team, Pengutronix Kernel Team,
	jerome.oufella, Fabio Estevam, linux-arm-kernel

On Wed, Oct 16, 2019 at 11:22:55AM +0200, Gilles DOFFE wrote:
> The pca9535 gpio expander is present on the Rex baseboard, but missing
> from the dtsi.
> The pca9535 is on i2c2 bus which is common to the three SOM
> variants (Basic/Pro/Ultra), thus it is activated by default.
> 
> Add also the new gpio controller and the associated interrupt line
> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
> 
> Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
> ---
>  arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> index 97f1659144ea..305b57fadc60 100644
> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> @@ -132,6 +132,19 @@
>  	pinctrl-0 = <&pinctrl_i2c2>;
>  	status = "okay";
>  
> +	pca9535: gpio-expander@27 {
> +		compatible = "nxp,pca9535";
> +		reg = <0x27>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pca9535>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
>  	eeprom@57 {
>  		compatible = "atmel,24c02";
>  		reg = <0x57>;
> @@ -237,6 +250,12 @@
>  			>;
>  		};
>  
> +		pinctrl_pca9535: pca9535 {

For sake of consistency, the node name should be prefixed with 'grp',
which tells this is a pinctrl group node.

I fixed it up and applied the patch.

Shawn

> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
> +		   >;
> +		};
> +
>  		pinctrl_uart1: uart1grp {
>  			fsl,pins = <
>  				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535
@ 2019-10-26 12:26   ` Shawn Guo
  0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2019-10-26 12:26 UTC (permalink / raw)
  To: Gilles DOFFE
  Cc: devicetree, jerome.oufella, rennes, Rob Herring, Mark Rutland,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, linux-arm-kernel, linux-kernel

On Wed, Oct 16, 2019 at 11:22:55AM +0200, Gilles DOFFE wrote:
> The pca9535 gpio expander is present on the Rex baseboard, but missing
> from the dtsi.
> The pca9535 is on i2c2 bus which is common to the three SOM
> variants (Basic/Pro/Ultra), thus it is activated by default.
> 
> Add also the new gpio controller and the associated interrupt line
> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
> 
> Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
> ---
>  arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> index 97f1659144ea..305b57fadc60 100644
> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> @@ -132,6 +132,19 @@
>  	pinctrl-0 = <&pinctrl_i2c2>;
>  	status = "okay";
>  
> +	pca9535: gpio-expander@27 {
> +		compatible = "nxp,pca9535";
> +		reg = <0x27>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pca9535>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
>  	eeprom@57 {
>  		compatible = "atmel,24c02";
>  		reg = <0x57>;
> @@ -237,6 +250,12 @@
>  			>;
>  		};
>  
> +		pinctrl_pca9535: pca9535 {

For sake of consistency, the node name should be prefixed with 'grp',
which tells this is a pinctrl group node.

I fixed it up and applied the patch.

Shawn

> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
> +		   >;
> +		};
> +
>  		pinctrl_uart1: uart1grp {
>  			fsl,pins = <
>  				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
> -- 
> 2.20.1
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-26 12:26 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-16  9:22 [PATCH v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535 Gilles DOFFE
2019-10-16  9:22 ` Gilles DOFFE
2019-10-26 12:26 ` Shawn Guo
2019-10-26 12:26   ` Shawn Guo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.