* [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10
@ 2019-10-26 16:44 Louis Aussedat
2019-10-26 16:44 ` [Buildroot] [PATCH 2/2] configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of uEnv.txt Louis Aussedat
2019-10-26 16:57 ` [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Thomas Petazzoni
0 siblings, 2 replies; 5+ messages in thread
From: Louis Aussedat @ 2019-10-26 16:44 UTC (permalink / raw)
To: buildroot
This updates Linux kernel from 5.0 to 5.3.4 and U-Boot from 2019.01 to 2019.10.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
---
configs/friendlyarm_nanopi_neo_plus2_defconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs/friendlyarm_nanopi_neo_plus2_defconfig b/configs/friendlyarm_nanopi_neo_plus2_defconfig
index 6a5b36b7b1..c807b3100b 100644
--- a/configs/friendlyarm_nanopi_neo_plus2_defconfig
+++ b/configs/friendlyarm_nanopi_neo_plus2_defconfig
@@ -2,7 +2,7 @@ BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV4=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
@@ -18,7 +18,7 @@ R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
@@ -33,7 +33,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo-plus2/boot.cmd
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.4"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of uEnv.txt
2019-10-26 16:44 [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Louis Aussedat
@ 2019-10-26 16:44 ` Louis Aussedat
2019-10-26 16:57 ` Thomas Petazzoni
2019-10-26 16:57 ` [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Thomas Petazzoni
1 sibling, 1 reply; 5+ messages in thread
From: Louis Aussedat @ 2019-10-26 16:44 UTC (permalink / raw)
To: buildroot
This remove the file boot.cmd to use an extlinux.conf instead.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
---
board/friendlyarm/nanopi-neo-plus2/boot.cmd | 6 ------
board/friendlyarm/nanopi-neo-plus2/extlinux.conf | 4 ++++
board/friendlyarm/nanopi-neo-plus2/genimage.cfg | 2 +-
board/friendlyarm/nanopi-neo-plus2/post-build.sh | 4 ++++
configs/friendlyarm_nanopi_neo_plus2_defconfig | 3 +--
5 files changed, 10 insertions(+), 9 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/boot.cmd
create mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
create mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
diff --git a/board/friendlyarm/nanopi-neo-plus2/boot.cmd b/board/friendlyarm/nanopi-neo-plus2/boot.cmd
deleted file mode 100644
index 227604a23d..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo-plus2.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-neo-plus2/extlinux.conf b/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
new file mode 100644
index 0000000000..fcb6f632c1
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
@@ -0,0 +1,4 @@
+label linux
+ kernel /Image
+ devicetree /sun50i-h5-nanopi-neo-plus2.dtb
+ append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
index a4c2a7a894..fb871abd43 100644
--- a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
@@ -3,7 +3,7 @@ image boot.vfat {
files = {
"Image",
"sun50i-h5-nanopi-neo-plus2.dtb",
- "boot.scr"
+ "extlinux"
}
}
size = 64M
diff --git a/board/friendlyarm/nanopi-neo-plus2/post-build.sh b/board/friendlyarm/nanopi-neo-plus2/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo-plus2/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/configs/friendlyarm_nanopi_neo_plus2_defconfig b/configs/friendlyarm_nanopi_neo_plus2_defconfig
index c807b3100b..461e468cb6 100644
--- a/configs/friendlyarm_nanopi_neo_plus2_defconfig
+++ b/configs/friendlyarm_nanopi_neo_plus2_defconfig
@@ -27,8 +27,6 @@ BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_TARGET_UBOOT_BOOT_SCRIPT=y
-BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo-plus2/boot.cmd"
# Kernel
BR2_LINUX_KERNEL=y
@@ -49,6 +47,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo-plus2/post-build.sh"
# wireless firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10
2019-10-26 16:44 [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Louis Aussedat
2019-10-26 16:44 ` [Buildroot] [PATCH 2/2] configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of uEnv.txt Louis Aussedat
@ 2019-10-26 16:57 ` Thomas Petazzoni
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Petazzoni @ 2019-10-26 16:57 UTC (permalink / raw)
To: buildroot
On Sat, 26 Oct 2019 18:44:32 +0200
Louis Aussedat <aussedat.louis@gmail.com> wrote:
> This updates Linux kernel from 5.0 to 5.3.4 and U-Boot from 2019.01 to 2019.10.
>
> Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
> ---
> configs/friendlyarm_nanopi_neo_plus2_defconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-10-26 18:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-26 16:44 [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Louis Aussedat
2019-10-26 16:44 ` [Buildroot] [PATCH 2/2] configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of uEnv.txt Louis Aussedat
2019-10-26 16:57 ` Thomas Petazzoni
[not found] ` <CAHrt+GFuOPm1BtC1vNKOagi-kGrvxBgfcy_dsi-KgPwXT8agow@mail.gmail.com>
2019-10-26 18:07 ` Thomas Petazzoni
2019-10-26 16:57 ` [Buildroot] [PATCH 1/2] configs/friendlyarm_nanopi_neo_plus2: bump Linux kernel to 5.3.4 and U-Boot to 2019.10 Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.