From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>,
Vladimir Oltean <olteanv@gmail.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>
Subject: [PATCH 0/2] ARM: dts: ls1021a: define and use external interrupt lines
Date: Tue, 12 Nov 2019 14:20:08 +0100 [thread overview]
Message-ID: <20191112132010.18274-1-linux@rasmusvillemoes.dk> (raw)
A device tree binding documentation as well as a driver implementing
support for the external interrupt lines on the ls1021a has been
merged into irqchip-next, so will very likely appear in v5.5. See
87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines
present in next-20191112.
These patches simply add the extirq node to the ls1021a.dtsi and make
use of it on the LS1021A-TSN board. I hope these can be picked up so
they also land in v5.5, so we don't have to wait a full extra release
cycle.
Rasmus Villemoes (1):
ARM: dts: ls1021a: add node describing external interrupt lines
Vladimir Oltean (1):
ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs
arch/arm/boot/dts/ls1021a-tsn.dts | 4 ++++
arch/arm/boot/dts/ls1021a.dtsi | 19 +++++++++++++++++++
2 files changed, 23 insertions(+)
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Vladimir Oltean <olteanv@gmail.com>,
Marc Zyngier <maz@kernel.org>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>
Subject: [PATCH 0/2] ARM: dts: ls1021a: define and use external interrupt lines
Date: Tue, 12 Nov 2019 14:20:08 +0100 [thread overview]
Message-ID: <20191112132010.18274-1-linux@rasmusvillemoes.dk> (raw)
A device tree binding documentation as well as a driver implementing
support for the external interrupt lines on the ls1021a has been
merged into irqchip-next, so will very likely appear in v5.5. See
87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines
present in next-20191112.
These patches simply add the extirq node to the ls1021a.dtsi and make
use of it on the LS1021A-TSN board. I hope these can be picked up so
they also land in v5.5, so we don't have to wait a full extra release
cycle.
Rasmus Villemoes (1):
ARM: dts: ls1021a: add node describing external interrupt lines
Vladimir Oltean (1):
ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs
arch/arm/boot/dts/ls1021a-tsn.dts | 4 ++++
arch/arm/boot/dts/ls1021a.dtsi | 19 +++++++++++++++++++
2 files changed, 23 insertions(+)
--
2.23.0
next reply other threads:[~2019-11-12 13:20 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 13:20 Rasmus Villemoes [this message]
2019-11-12 13:20 ` [PATCH 0/2] ARM: dts: ls1021a: define and use external interrupt lines Rasmus Villemoes
2019-11-12 13:20 ` [PATCH 1/2] ARM: dts: ls1021a: add node describing " Rasmus Villemoes
2019-11-12 13:20 ` Rasmus Villemoes
2019-11-12 13:20 ` [PATCH 2/2] ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs Rasmus Villemoes
2019-11-12 13:20 ` Rasmus Villemoes
2019-11-12 13:44 ` Vladimir Oltean
2019-11-12 13:44 ` Vladimir Oltean
2019-11-12 13:49 ` Marc Zyngier
2019-11-12 13:49 ` Marc Zyngier
2019-11-12 13:53 ` Vladimir Oltean
2019-11-12 13:53 ` Vladimir Oltean
2019-11-12 14:01 ` Andrew Lunn
2019-11-12 14:01 ` Andrew Lunn
2019-11-12 14:04 ` Marc Zyngier
2019-11-12 14:04 ` Marc Zyngier
2019-11-12 14:12 ` Vladimir Oltean
2019-11-12 14:12 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191112132010.18274-1-linux@rasmusvillemoes.dk \
--to=linux@rasmusvillemoes.dk \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=olteanv@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.