* [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section @ 2019-11-15 21:07 Michael Trimarchi 2019-11-15 21:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support Michael Trimarchi 2019-11-17 9:12 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Kever Yang 0 siblings, 2 replies; 6+ messages in thread From: Michael Trimarchi @ 2019-11-15 21:07 UTC (permalink / raw) To: u-boot dmc is used to initialize the memory controller. It's needed by u-boot. Move it in the specific section Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Changes: nothing --- arch/arm/dts/rk3288-tinker-u-boot.dtsi | 12 ++++++++++++ arch/arm/dts/rk3288-tinker.dts | 12 ------------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi index f7f9d6dc72..732aa4f91f 100644 --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi @@ -5,6 +5,18 @@ #include "rk3288-u-boot.dtsi" +&dmc { + u-boot,dm-pre-reloc; + rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d + 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 + 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 + 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 + 0x8 0x1f4>; + rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 + 0x0 0xc3 0x6 0x2>; + rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; +}; + &pinctrl { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts index 94c3afe860..4b8405fd82 100644 --- a/arch/arm/dts/rk3288-tinker.dts +++ b/arch/arm/dts/rk3288-tinker.dts @@ -15,18 +15,6 @@ }; }; -&dmc { - rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d - 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 - 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 - 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 - 0x8 0x1f4>; - rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 - 0x0 0xc3 0x6 0x2>; - rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; -}; - - &pinctrl { usb { host_vbus_drv: host-vbus-drv { -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support 2019-11-15 21:07 [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Michael Trimarchi @ 2019-11-15 21:07 ` Michael Trimarchi 2019-11-17 9:12 ` Kever Yang 2019-11-17 9:12 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Kever Yang 1 sibling, 1 reply; 6+ messages in thread From: Michael Trimarchi @ 2019-11-15 21:07 UTC (permalink / raw) To: u-boot Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Changes: v3->v4: Add mantainer and boot from to save the enviroment v2->v3: drop dmc section v1->v2: Add boot configuration for emmc --- arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 +++++++ arch/arm/dts/rk3288-tinker-s.dts | 29 ++++++ board/rockchip/tinker_rk3288/MAINTAINERS | 7 ++ board/rockchip/tinker_rk3288/tinker-rk3288.c | 12 +++ configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++ include/configs/tinker_rk3288.h | 1 + 7 files changed, 183 insertions(+) create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi create mode 100644 arch/arm/dts/rk3288-tinker-s.dts create mode 100644 configs/tinker-s-rk3288_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 85ef00a2bd..dfaeea4a25 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ rk3288-popmetal.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \ + rk3288-tinker-s.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi new file mode 100644 index 0000000000..a177fca73a --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Amarula Solutions SRO + */ + +#include "rk3288-u-boot.dtsi" +#include "rk3288-tinker-u-boot.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = \ + "same-as-spl", &sdmmc, &emmc; + }; +}; + +&emmc { + u-boot,dm-spl; +}; + +&emmc_clk { + u-boot,dm-spl; +}; + +&emmc_cmd { + u-boot,dm-spl; +}; + +&emmc_pwr { + u-boot,dm-spl; +}; + +&emmc_bus8 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts new file mode 100644 index 0000000000..cc7ac5f881 --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rk3288-tinker.dtsi" + +/ { + model = "Rockchip RK3288 Asus Tinker Board S"; + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + max-frequency = <150000000>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; diff --git a/board/rockchip/tinker_rk3288/MAINTAINERS b/board/rockchip/tinker_rk3288/MAINTAINERS index cddceafb6e..ed5de682c9 100644 --- a/board/rockchip/tinker_rk3288/MAINTAINERS +++ b/board/rockchip/tinker_rk3288/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/rockchip/tinker_rk3288 F: include/configs/tinker_rk3288.h F: configs/tinker-rk3288_defconfig + +TINKER-S-RK3288 +M: Michael Trimarchi <michael@amarulasolutions.com> +S: Maintained +F: board/rockchip/tinker_rk3288 +F: include/configs/tinker_rk3288.h +F: configs/tinker-s-rk3288_defconfig diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c index 6c76c3c25c..7a0c3c997d 100644 --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c @@ -8,6 +8,8 @@ #include <env.h> #include <i2c_eeprom.h> #include <netdev.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/io.h> static int get_ethaddr_from_eeprom(u8 *addr) { @@ -33,3 +35,13 @@ int rk3288_board_late_init(void) return 0; } + +int mmc_get_env_dev(void) +{ + u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR); + + if (bootdevice_brom_id == BROM_BOOTSOURCE_EMMC) + return 0; + + return 1; +} diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig new file mode 100644 index 0000000000..c851a93f31 --- /dev/null +++ b/configs/tinker-s-rk3288_defconfig @@ -0,0 +1,99 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_ROCKCHIP_RK3288=y +CONFIG_TARGET_TINKER_RK3288=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_SIZE_LIMIT=307200 +CONFIG_SPL_STACK_R_ADDR=0x800000 +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_USE_PREBOOT=y +CONFIG_SILENT_CONSOLE=y +CONFIG_CONSOLE_MUX=y +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_PARTITION_UUIDS=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +# CONFIG_SPL_SIMPLE_BUS is not set +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_DWC2=y +CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_ERRNO_STR=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y +CONFIG_CONSOLE_SCROLL_LINES=10 diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h index 5adae68c91..f8a55a2cec 100644 --- a/include/configs/tinker_rk3288.h +++ b/include/configs/tinker_rk3288.h @@ -12,6 +12,7 @@ #undef BOOT_TARGET_DEVICES #define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support 2019-11-15 21:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support Michael Trimarchi @ 2019-11-17 9:12 ` Kever Yang 2019-11-18 3:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support【请注意，邮件由u-boot-bounces@lists.denx.de代发】 " Kever Yang 0 siblings, 1 reply; 6+ messages in thread From: Kever Yang @ 2019-11-17 9:12 UTC (permalink / raw) To: u-boot On 2019/11/16 上午5:07, Michael Trimarchi wrote: > Support tinker-s board. The board is equivalent of tinker board > except of emmc. > > TODO: > - support of usb current burst when the board is powered from pc > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes: > v3->v4: Add mantainer and boot from to save the enviroment > v2->v3: drop dmc section > v1->v2: Add boot configuration for emmc > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 +++++++ > arch/arm/dts/rk3288-tinker-s.dts | 29 ++++++ > board/rockchip/tinker_rk3288/MAINTAINERS | 7 ++ > board/rockchip/tinker_rk3288/tinker-rk3288.c | 12 +++ > configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++ > include/configs/tinker_rk3288.h | 1 + > 7 files changed, 183 insertions(+) > create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3288-tinker-s.dts > create mode 100644 configs/tinker-s-rk3288_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 85ef00a2bd..dfaeea4a25 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ > rk3288-popmetal.dtb \ > rk3288-rock2-square.dtb \ > rk3288-tinker.dtb \ > + rk3288-tinker-s.dtb \ > rk3288-veyron-jerry.dtb \ > rk3288-veyron-mickey.dtb \ > rk3288-veyron-minnie.dtb \ > diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi > new file mode 100644 > index 0000000000..a177fca73a > --- /dev/null > +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi > @@ -0,0 +1,34 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Amarula Solutions SRO > + */ > + > +#include "rk3288-u-boot.dtsi" > +#include "rk3288-tinker-u-boot.dtsi" > + > +/ { > + chosen { > + u-boot,spl-boot-order = \ > + "same-as-spl", &sdmmc, &emmc; > + }; > +}; > + > +&emmc { > + u-boot,dm-spl; > +}; > + > +&emmc_clk { > + u-boot,dm-spl; > +}; > + > +&emmc_cmd { > + u-boot,dm-spl; > +}; > + > +&emmc_pwr { > + u-boot,dm-spl; > +}; > + > +&emmc_bus8 { > + u-boot,dm-spl; > +}; > diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts > new file mode 100644 > index 0000000000..cc7ac5f881 > --- /dev/null > +++ b/arch/arm/dts/rk3288-tinker-s.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + */ > + > +/dts-v1/; > + > +#include "rk3288-tinker.dtsi" > + > +/ { > + model = "Rockchip RK3288 Asus Tinker Board S"; > + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; > + > + chosen { > + stdout-path = &uart2; > + }; > +}; > + > +&emmc { > + bus-width = <8>; > + cap-mmc-highspeed; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; > + max-frequency = <150000000>; > + mmc-hs200-1_8v; > + mmc-ddr-1_8v; > + status = "okay"; > +}; > diff --git a/board/rockchip/tinker_rk3288/MAINTAINERS b/board/rockchip/tinker_rk3288/MAINTAINERS > index cddceafb6e..ed5de682c9 100644 > --- a/board/rockchip/tinker_rk3288/MAINTAINERS > +++ b/board/rockchip/tinker_rk3288/MAINTAINERS > @@ -4,3 +4,10 @@ S: Maintained > F: board/rockchip/tinker_rk3288 > F: include/configs/tinker_rk3288.h > F: configs/tinker-rk3288_defconfig > + > +TINKER-S-RK3288 > +M: Michael Trimarchi <michael@amarulasolutions.com> > +S: Maintained > +F: board/rockchip/tinker_rk3288 > +F: include/configs/tinker_rk3288.h > +F: configs/tinker-s-rk3288_defconfig > diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c > index 6c76c3c25c..7a0c3c997d 100644 > --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c > +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c > @@ -8,6 +8,8 @@ > #include <env.h> > #include <i2c_eeprom.h> > #include <netdev.h> > +#include <asm/arch-rockchip/bootrom.h> > +#include <asm/io.h> > > static int get_ethaddr_from_eeprom(u8 *addr) > { > @@ -33,3 +35,13 @@ int rk3288_board_late_init(void) > > return 0; > } > + > +int mmc_get_env_dev(void) > +{ > + u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR); > + > + if (bootdevice_brom_id == BROM_BOOTSOURCE_EMMC) > + return 0; > + > + return 1; > +} > diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig > new file mode 100644 > index 0000000000..c851a93f31 > --- /dev/null > +++ b/configs/tinker-s-rk3288_defconfig > @@ -0,0 +1,99 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x01000000 > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_ROCKCHIP_RK3288=y > +CONFIG_TARGET_TINKER_RK3288=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_SPL_SIZE_LIMIT=307200 > +CONFIG_SPL_STACK_R_ADDR=0x800000 > +CONFIG_DEBUG_UART_BASE=0xff690000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_DEBUG_UART=y > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000 > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > +# CONFIG_ANDROID_BOOT_IMAGE is not set > +CONFIG_USE_PREBOOT=y > +CONFIG_SILENT_CONSOLE=y > +CONFIG_CONSOLE_MUX=y > +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 > +CONFIG_SPL_I2C_SUPPORT=y > +CONFIG_SPL_POWER_SUPPORT=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SPI=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_BMP=y > +CONFIG_CMD_CACHE=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > +# CONFIG_SPL_DOS_PARTITION is not set > +# CONFIG_SPL_EFI_PARTITION is not set > +CONFIG_SPL_PARTITION_UUIDS=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" > +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_REGMAP=y > +CONFIG_SPL_REGMAP=y > +CONFIG_SYSCON=y > +CONFIG_SPL_SYSCON=y > +# CONFIG_SPL_SIMPLE_BUS is not set > +CONFIG_CLK=y > +CONFIG_SPL_CLK=y > +CONFIG_FASTBOOT_FLASH=y > +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 > +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MISC=y > +CONFIG_I2C_EEPROM=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_SPI_FLASH=y > +CONFIG_SF_DEFAULT_SPEED=20000000 > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_DM_PMIC=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_SPL_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_SPL_DM_REGULATOR_FIXED=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_RAM=y > +CONFIG_SPL_RAM=y > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_DWC2=y > +CONFIG_ROCKCHIP_USB2_PHY=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" > +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 > +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a > +CONFIG_USB_GADGET_DWC2_OTG=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_CMD_DHRYSTONE=y > +CONFIG_ERRNO_STR=y > +CONFIG_DM_VIDEO=y > +CONFIG_DISPLAY=y > +CONFIG_VIDEO_ROCKCHIP=y > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y > +CONFIG_CONSOLE_SCROLL_LINES=10 > diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h > index 5adae68c91..f8a55a2cec 100644 > --- a/include/configs/tinker_rk3288.h > +++ b/include/configs/tinker_rk3288.h > @@ -12,6 +12,7 @@ > #undef BOOT_TARGET_DEVICES > > #define BOOT_TARGET_DEVICES(func) \ > + func(MMC, mmc, 0) \ > func(MMC, mmc, 1) \ > func(USB, usb, 0) \ > func(PXE, pxe, na) \ ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support【请注意，邮件由u-boot-bounces@lists.denx.de代发】 board support 2019-11-17 9:12 ` Kever Yang @ 2019-11-18 3:07 ` Kever Yang 0 siblings, 0 replies; 6+ messages in thread From: Kever Yang @ 2019-11-18 3:07 UTC (permalink / raw) To: u-boot On 2019/11/17 下午5:12, Kever Yang wrote: > > On 2019/11/16 上午5:07, Michael Trimarchi wrote: >> Support tinker-s board. The board is equivalent of tinker board >> except of emmc. >> >> TODO: >> - support of usb current burst when the board is powered from pc >> >> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Applied to u-boot-rockchip master. Thanks, - Kever > > Thanks, > - Kever >> --- >> Changes: >> v3->v4: Add mantainer and boot from to save the enviroment >> v2->v3: drop dmc section >> v1->v2: Add boot configuration for emmc >> --- >> arch/arm/dts/Makefile | 1 + >> arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 +++++++ >> arch/arm/dts/rk3288-tinker-s.dts | 29 ++++++ >> board/rockchip/tinker_rk3288/MAINTAINERS | 7 ++ >> board/rockchip/tinker_rk3288/tinker-rk3288.c | 12 +++ >> configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++ >> include/configs/tinker_rk3288.h | 1 + >> 7 files changed, 183 insertions(+) >> create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi >> create mode 100644 arch/arm/dts/rk3288-tinker-s.dts >> create mode 100644 configs/tinker-s-rk3288_defconfig >> >> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile >> index 85ef00a2bd..dfaeea4a25 100644 >> --- a/arch/arm/dts/Makefile >> +++ b/arch/arm/dts/Makefile >> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ >> rk3288-popmetal.dtb \ >> rk3288-rock2-square.dtb \ >> rk3288-tinker.dtb \ >> + rk3288-tinker-s.dtb \ >> rk3288-veyron-jerry.dtb \ >> rk3288-veyron-mickey.dtb \ >> rk3288-veyron-minnie.dtb \ >> diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi >> b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi >> new file mode 100644 >> index 0000000000..a177fca73a >> --- /dev/null >> +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi >> @@ -0,0 +1,34 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright (C) 2019 Amarula Solutions SRO >> + */ >> + >> +#include "rk3288-u-boot.dtsi" >> +#include "rk3288-tinker-u-boot.dtsi" >> + >> +/ { >> + chosen { >> + u-boot,spl-boot-order = \ >> + "same-as-spl", &sdmmc, &emmc; >> + }; >> +}; >> + >> +&emmc { >> + u-boot,dm-spl; >> +}; >> + >> +&emmc_clk { >> + u-boot,dm-spl; >> +}; >> + >> +&emmc_cmd { >> + u-boot,dm-spl; >> +}; >> + >> +&emmc_pwr { >> + u-boot,dm-spl; >> +}; >> + >> +&emmc_bus8 { >> + u-boot,dm-spl; >> +}; >> diff --git a/arch/arm/dts/rk3288-tinker-s.dts >> b/arch/arm/dts/rk3288-tinker-s.dts >> new file mode 100644 >> index 0000000000..cc7ac5f881 >> --- /dev/null >> +++ b/arch/arm/dts/rk3288-tinker-s.dts >> @@ -0,0 +1,29 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. >> + */ >> + >> +/dts-v1/; >> + >> +#include "rk3288-tinker.dtsi" >> + >> +/ { >> + model = "Rockchip RK3288 Asus Tinker Board S"; >> + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; >> + >> + chosen { >> + stdout-path = &uart2; >> + }; >> +}; >> + >> +&emmc { >> + bus-width = <8>; >> + cap-mmc-highspeed; >> + non-removable; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; >> + max-frequency = <150000000>; >> + mmc-hs200-1_8v; >> + mmc-ddr-1_8v; >> + status = "okay"; >> +}; >> diff --git a/board/rockchip/tinker_rk3288/MAINTAINERS >> b/board/rockchip/tinker_rk3288/MAINTAINERS >> index cddceafb6e..ed5de682c9 100644 >> --- a/board/rockchip/tinker_rk3288/MAINTAINERS >> +++ b/board/rockchip/tinker_rk3288/MAINTAINERS >> @@ -4,3 +4,10 @@ S: Maintained >> F: board/rockchip/tinker_rk3288 >> F: include/configs/tinker_rk3288.h >> F: configs/tinker-rk3288_defconfig >> + >> +TINKER-S-RK3288 >> +M: Michael Trimarchi <michael@amarulasolutions.com> >> +S: Maintained >> +F: board/rockchip/tinker_rk3288 >> +F: include/configs/tinker_rk3288.h >> +F: configs/tinker-s-rk3288_defconfig >> diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c >> b/board/rockchip/tinker_rk3288/tinker-rk3288.c >> index 6c76c3c25c..7a0c3c997d 100644 >> --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c >> +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c >> @@ -8,6 +8,8 @@ >> #include <env.h> >> #include <i2c_eeprom.h> >> #include <netdev.h> >> +#include <asm/arch-rockchip/bootrom.h> >> +#include <asm/io.h> >> static int get_ethaddr_from_eeprom(u8 *addr) >> { >> @@ -33,3 +35,13 @@ int rk3288_board_late_init(void) >> return 0; >> } >> + >> +int mmc_get_env_dev(void) >> +{ >> + u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR); >> + >> + if (bootdevice_brom_id == BROM_BOOTSOURCE_EMMC) >> + return 0; >> + >> + return 1; >> +} >> diff --git a/configs/tinker-s-rk3288_defconfig >> b/configs/tinker-s-rk3288_defconfig >> new file mode 100644 >> index 0000000000..c851a93f31 >> --- /dev/null >> +++ b/configs/tinker-s-rk3288_defconfig >> @@ -0,0 +1,99 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_ROCKCHIP=y >> +CONFIG_SYS_TEXT_BASE=0x01000000 >> +CONFIG_SPL_GPIO_SUPPORT=y >> +CONFIG_ROCKCHIP_RK3288=y >> +CONFIG_TARGET_TINKER_RK3288=y >> +CONFIG_NR_DRAM_BANKS=1 >> +CONFIG_SPL_SIZE_LIMIT=307200 >> +CONFIG_SPL_STACK_R_ADDR=0x800000 >> +CONFIG_DEBUG_UART_BASE=0xff690000 >> +CONFIG_DEBUG_UART_CLOCK=24000000 >> +CONFIG_DEBUG_UART=y >> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000 >> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 >> +CONFIG_SYS_MALLOC_F_LEN=0x4000 >> +# CONFIG_ANDROID_BOOT_IMAGE is not set >> +CONFIG_USE_PREBOOT=y >> +CONFIG_SILENT_CONSOLE=y >> +CONFIG_CONSOLE_MUX=y >> +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" >> +# CONFIG_DISPLAY_CPUINFO is not set >> +CONFIG_DISPLAY_BOARDINFO_LATE=y >> +CONFIG_SPL_STACK_R=y >> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 >> +CONFIG_SPL_I2C_SUPPORT=y >> +CONFIG_SPL_POWER_SUPPORT=y >> +CONFIG_CMD_GPIO=y >> +CONFIG_CMD_GPT=y >> +CONFIG_CMD_I2C=y >> +CONFIG_CMD_MMC=y >> +CONFIG_CMD_SF=y >> +CONFIG_CMD_SPI=y >> +CONFIG_CMD_USB=y >> +CONFIG_CMD_USB_MASS_STORAGE=y >> +# CONFIG_CMD_SETEXPR is not set >> +CONFIG_CMD_BMP=y >> +CONFIG_CMD_CACHE=y >> +CONFIG_CMD_TIME=y >> +CONFIG_CMD_PMIC=y >> +CONFIG_CMD_REGULATOR=y >> +# CONFIG_SPL_DOS_PARTITION is not set >> +# CONFIG_SPL_EFI_PARTITION is not set >> +CONFIG_SPL_PARTITION_UUIDS=y >> +CONFIG_SPL_OF_CONTROL=y >> +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" >> +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent >> assigned-clocks assigned-clock-rates assigned-clock-parents" >> +CONFIG_ENV_IS_IN_MMC=y >> +CONFIG_REGMAP=y >> +CONFIG_SPL_REGMAP=y >> +CONFIG_SYSCON=y >> +CONFIG_SPL_SYSCON=y >> +# CONFIG_SPL_SIMPLE_BUS is not set >> +CONFIG_CLK=y >> +CONFIG_SPL_CLK=y >> +CONFIG_FASTBOOT_FLASH=y >> +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 >> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y >> +CONFIG_ROCKCHIP_GPIO=y >> +CONFIG_SYS_I2C_ROCKCHIP=y >> +CONFIG_MISC=y >> +CONFIG_I2C_EEPROM=y >> +CONFIG_MMC_DW=y >> +CONFIG_MMC_DW_ROCKCHIP=y >> +CONFIG_SPI_FLASH=y >> +CONFIG_SF_DEFAULT_SPEED=20000000 >> +CONFIG_DM_ETH=y >> +CONFIG_ETH_DESIGNWARE=y >> +CONFIG_GMAC_ROCKCHIP=y >> +CONFIG_PINCTRL=y >> +CONFIG_SPL_PINCTRL=y >> +CONFIG_DM_PMIC=y >> +CONFIG_PMIC_RK8XX=y >> +CONFIG_SPL_DM_REGULATOR=y >> +CONFIG_DM_REGULATOR_FIXED=y >> +CONFIG_SPL_DM_REGULATOR_FIXED=y >> +CONFIG_REGULATOR_RK8XX=y >> +CONFIG_PWM_ROCKCHIP=y >> +CONFIG_RAM=y >> +CONFIG_SPL_RAM=y >> +CONFIG_DEBUG_UART_SHIFT=2 >> +CONFIG_SYSRESET=y >> +CONFIG_USB=y >> +CONFIG_USB_DWC2=y >> +CONFIG_ROCKCHIP_USB2_PHY=y >> +CONFIG_USB_GADGET=y >> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" >> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 >> +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a >> +CONFIG_USB_GADGET_DWC2_OTG=y >> +CONFIG_USB_HOST_ETHER=y >> +CONFIG_USB_ETHER_ASIX=y >> +CONFIG_USB_ETHER_SMSC95XX=y >> +CONFIG_CMD_DHRYSTONE=y >> +CONFIG_ERRNO_STR=y >> +CONFIG_DM_VIDEO=y >> +CONFIG_DISPLAY=y >> +CONFIG_VIDEO_ROCKCHIP=y >> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y >> +CONFIG_CONSOLE_SCROLL_LINES=10 >> diff --git a/include/configs/tinker_rk3288.h >> b/include/configs/tinker_rk3288.h >> index 5adae68c91..f8a55a2cec 100644 >> --- a/include/configs/tinker_rk3288.h >> +++ b/include/configs/tinker_rk3288.h >> @@ -12,6 +12,7 @@ >> #undef BOOT_TARGET_DEVICES >> #define BOOT_TARGET_DEVICES(func) \ >> + func(MMC, mmc, 0) \ >> func(MMC, mmc, 1) \ >> func(USB, usb, 0) \ >> func(PXE, pxe, na) \ > > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section 2019-11-15 21:07 [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Michael Trimarchi 2019-11-15 21:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support Michael Trimarchi @ 2019-11-17 9:12 ` Kever Yang 2019-11-18 3:07 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section【请注意，邮件由u-boot-bounces@lists.denx.de代发】 Kever Yang 1 sibling, 1 reply; 6+ messages in thread From: Kever Yang @ 2019-11-17 9:12 UTC (permalink / raw) To: u-boot On 2019/11/16 上午5:07, Michael Trimarchi wrote: > dmc is used to initialize the memory controller. It's needed by > u-boot. Move it in the specific section > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes: > nothing > --- > arch/arm/dts/rk3288-tinker-u-boot.dtsi | 12 ++++++++++++ > arch/arm/dts/rk3288-tinker.dts | 12 ------------ > 2 files changed, 12 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi > index f7f9d6dc72..732aa4f91f 100644 > --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi > +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi > @@ -5,6 +5,18 @@ > > #include "rk3288-u-boot.dtsi" > > +&dmc { > + u-boot,dm-pre-reloc; > + rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d > + 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 > + 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 > + 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 > + 0x8 0x1f4>; > + rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 > + 0x0 0xc3 0x6 0x2>; > + rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; > +}; > + > &pinctrl { > u-boot,dm-pre-reloc; > }; > diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts > index 94c3afe860..4b8405fd82 100644 > --- a/arch/arm/dts/rk3288-tinker.dts > +++ b/arch/arm/dts/rk3288-tinker.dts > @@ -15,18 +15,6 @@ > }; > }; > > -&dmc { > - rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d > - 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 > - 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 > - 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 > - 0x8 0x1f4>; > - rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 > - 0x0 0xc3 0x6 0x2>; > - rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; > -}; > - > - > &pinctrl { > usb { > host_vbus_drv: host-vbus-drv { ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section【请注意，邮件由u-boot-bounces@lists.denx.de代发】 2019-11-17 9:12 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Kever Yang @ 2019-11-18 3:07 ` Kever Yang 0 siblings, 0 replies; 6+ messages in thread From: Kever Yang @ 2019-11-18 3:07 UTC (permalink / raw) To: u-boot On 2019/11/17 下午5:12, Kever Yang wrote: > > On 2019/11/16 上午5:07, Michael Trimarchi wrote: >> dmc is used to initialize the memory controller. It's needed by >> u-boot. Move it in the specific section >> >> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Applied to u-boot-rockchip master. Thanks, - Kever > > Thanks, > - Kever >> --- >> Changes: >> nothing >> --- >> arch/arm/dts/rk3288-tinker-u-boot.dtsi | 12 ++++++++++++ >> arch/arm/dts/rk3288-tinker.dts | 12 ------------ >> 2 files changed, 12 insertions(+), 12 deletions(-) >> >> diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi >> b/arch/arm/dts/rk3288-tinker-u-boot.dtsi >> index f7f9d6dc72..732aa4f91f 100644 >> --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi >> +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi >> @@ -5,6 +5,18 @@ >> #include "rk3288-u-boot.dtsi" >> +&dmc { >> + u-boot,dm-pre-reloc; >> + rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d >> + 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 >> + 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 >> + 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 >> + 0x8 0x1f4>; >> + rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 >> + 0x0 0xc3 0x6 0x2>; >> + rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; >> +}; >> + >> &pinctrl { >> u-boot,dm-pre-reloc; >> }; >> diff --git a/arch/arm/dts/rk3288-tinker.dts >> b/arch/arm/dts/rk3288-tinker.dts >> index 94c3afe860..4b8405fd82 100644 >> --- a/arch/arm/dts/rk3288-tinker.dts >> +++ b/arch/arm/dts/rk3288-tinker.dts >> @@ -15,18 +15,6 @@ >> }; >> }; >> -&dmc { >> - rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d >> - 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 >> - 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 >> - 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 >> - 0x8 0x1f4>; >> - rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 >> - 0x0 0xc3 0x6 0x2>; >> - rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; >> -}; >> - >> - >> &pinctrl { >> usb { >> host_vbus_drv: host-vbus-drv { > > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-18 3:07 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-11-15 21:07 [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Michael Trimarchi 2019-11-15 21:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support Michael Trimarchi 2019-11-17 9:12 ` Kever Yang 2019-11-18 3:07 ` [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support【请注意，邮件由u-boot-bounces@lists.denx.de代发】 " Kever Yang 2019-11-17 9:12 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section Kever Yang 2019-11-18 3:07 ` [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section【请注意，邮件由u-boot-bounces@lists.denx.de代发】 Kever Yang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.