[PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC

[PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC

[Beniamin Bia]

From: Paul Cercueil <paul.cercueil@analog.com>

AD7091R5 is 4-Channel, I2C, Ultra Low Power,12-Bit ADC.

This driver will also support AD7091R2/4/8 in the future.

Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
Changes in v5:
-nothing changed

 drivers/iio/adc/Kconfig        |   7 +
 drivers/iio/adc/Makefile       |   1 +
 drivers/iio/adc/ad7091r-base.c | 260 +++++++++++++++++++++++++++++++++
 drivers/iio/adc/ad7091r-base.h |  25 ++++
 drivers/iio/adc/ad7091r5.c     | 108 ++++++++++++++
 5 files changed, 401 insertions(+)
 create mode 100644 drivers/iio/adc/ad7091r-base.c
 create mode 100644 drivers/iio/adc/ad7091r-base.h
 create mode 100644 drivers/iio/adc/ad7091r5.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7e3286265a38..80b1b9551749 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -22,6 +22,13 @@ config AD7124
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7124.
 
+config AD7091R5
+	tristate "Analog Devices AD7091R5 ADC Driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for Analog Devices AD7091R-5 ADC.
+
 config AD7266
 	tristate "Analog Devices AD7265/AD7266 ADC driver"
 	depends on SPI_MASTER
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ef9cc485fb67..55e44735aaac 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7124) += ad7124.o
+obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7298) += ad7298.o
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
new file mode 100644
index 000000000000..854de7c654c2
--- /dev/null
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7091RX Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "ad7091r-base.h"
+
+#define AD7091R_REG_RESULT  0
+#define AD7091R_REG_CHANNEL 1
+#define AD7091R_REG_CONF    2
+#define AD7091R_REG_ALERT   3
+#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
+#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
+#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
+
+/* AD7091R_REG_RESULT */
+#define AD7091R_REG_RESULT_CH_ID(x)	    (((x) >> 13) & 0x3)
+#define AD7091R_REG_RESULT_CONV_RESULT(x)   ((x) & 0xfff)
+
+/* AD7091R_REG_CONF */
+#define AD7091R_REG_CONF_AUTO   BIT(8)
+#define AD7091R_REG_CONF_CMD    BIT(10)
+
+#define AD7091R_REG_CONF_MODE_MASK  \
+	(AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
+
+enum ad7091r_mode {
+	AD7091R_MODE_SAMPLE,
+	AD7091R_MODE_COMMAND,
+	AD7091R_MODE_AUTOCYCLE,
+};
+
+struct ad7091r_state {
+	struct device *dev;
+	struct regmap *map;
+	const struct ad7091r_chip_info *chip_info;
+	enum ad7091r_mode mode;
+	struct mutex lock; /*lock to prevent concurent reads */
+};
+
+static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
+{
+	int ret, conf;
+
+	switch (mode) {
+	case AD7091R_MODE_SAMPLE:
+		conf = 0;
+		break;
+	case AD7091R_MODE_COMMAND:
+		conf = AD7091R_REG_CONF_CMD;
+		break;
+	case AD7091R_MODE_AUTOCYCLE:
+		conf = AD7091R_REG_CONF_AUTO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+				 AD7091R_REG_CONF_MODE_MASK, conf);
+	if (ret)
+		return ret;
+
+	st->mode = mode;
+
+	return 0;
+}
+
+static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
+{
+	unsigned int dummy;
+	int ret;
+
+	/* AD7091R_REG_CHANNEL specified which channels to be converted */
+	ret = regmap_write(st->map, AD7091R_REG_CHANNEL,
+			BIT(channel) | (BIT(channel) << 8));
+	if (ret)
+		return ret;
+
+	/*
+	 * There is a latency of one conversion before the channel conversion
+	 * sequence is updated
+	 */
+	return regmap_read(st->map, AD7091R_REG_RESULT, &dummy);
+}
+
+static int ad7091r_read_one(struct iio_dev *iio_dev,
+		unsigned int channel, unsigned int *read_val)
+{
+	struct ad7091r_state *st = iio_priv(iio_dev);
+	unsigned int val;
+	int ret;
+
+	ret = ad7091r_set_channel(st, channel);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(st->map, AD7091R_REG_RESULT, &val);
+	if (ret)
+		return ret;
+
+	if (AD7091R_REG_RESULT_CH_ID(val) != channel)
+		return -EIO;
+
+	*read_val = AD7091R_REG_RESULT_CONV_RESULT(val);
+
+	return 0;
+}
+
+static int ad7091r_read_raw(struct iio_dev *iio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long m)
+{
+	struct ad7091r_state *st = iio_priv(iio_dev);
+	unsigned int read_val;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		if (st->mode != AD7091R_MODE_COMMAND) {
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		ret = ad7091r_read_one(iio_dev, chan->channel, &read_val);
+		if (ret)
+			goto unlock;
+
+		*val = read_val;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static const struct iio_info ad7091r_info = {
+	.read_raw = ad7091r_read_raw,
+};
+
+static irqreturn_t ad7091r_event_handler(int irq, void *private)
+{
+	struct ad7091r_state *st = (struct ad7091r_state *) private;
+	struct iio_dev *iio_dev = dev_get_drvdata(st->dev);
+	unsigned int i, read_val;
+	int ret;
+	s64 timestamp = iio_get_time_ns(iio_dev);
+
+	ret = regmap_read(st->map, AD7091R_REG_ALERT, &read_val);
+	if (ret)
+		return IRQ_HANDLED;
+
+	for (i = 0; i < st->chip_info->num_channels; i++) {
+		if (read_val & BIT(i * 2))
+			iio_push_event(iio_dev,
+					IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
+						IIO_EV_TYPE_THRESH,
+						IIO_EV_DIR_RISING), timestamp);
+		if (read_val & BIT(i * 2 + 1))
+			iio_push_event(iio_dev,
+					IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
+						IIO_EV_TYPE_THRESH,
+						IIO_EV_DIR_FALLING), timestamp);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int ad7091r_probe(struct device *dev, const char *name,
+		const struct ad7091r_chip_info *chip_info,
+		struct regmap *map, int irq)
+{
+	struct iio_dev *iio_dev;
+	struct ad7091r_state *st;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(iio_dev);
+	st->dev = dev;
+	st->chip_info = chip_info;
+	st->map = map;
+
+	iio_dev->dev.parent = dev;
+	iio_dev->name = name;
+	iio_dev->info = &ad7091r_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	iio_dev->num_channels = chip_info->num_channels;
+	iio_dev->channels = chip_info->channels;
+
+	if (irq) {
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+				ad7091r_event_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st);
+		if (ret)
+			return ret;
+	}
+
+	/* Use command mode by default to convert only desired channels*/
+	ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, iio_dev);
+}
+EXPORT_SYMBOL_GPL(ad7091r_probe);
+
+static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case AD7091R_REG_RESULT:
+	case AD7091R_REG_ALERT:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case AD7091R_REG_RESULT:
+	case AD7091R_REG_ALERT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+const struct regmap_config ad7091r_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.writeable_reg = ad7091r_writeable_reg,
+	.volatile_reg = ad7091r_volatile_reg,
+};
+EXPORT_SYMBOL_GPL(ad7091r_regmap_config);
+
+MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7091Rx multi-channel converters");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
new file mode 100644
index 000000000000..b0b4fe01a681
--- /dev/null
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AD7091RX Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#ifndef __DRIVERS_IIO_ADC_AD7091R_BASE_H__
+#define __DRIVERS_IIO_ADC_AD7091R_BASE_H__
+
+struct device;
+struct ad7091r_state;
+
+struct ad7091r_chip_info {
+	unsigned int num_channels;
+	const struct iio_chan_spec *channels;
+};
+
+extern const struct regmap_config ad7091r_regmap_config;
+
+int ad7091r_probe(struct device *dev, const char *name,
+		const struct ad7091r_chip_info *chip_info,
+		struct regmap *map, int irq);
+
+#endif /* __DRIVERS_IIO_ADC_AD7091R_BASE_H__ */
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
new file mode 100644
index 000000000000..30ff0108a6ed
--- /dev/null
+++ b/drivers/iio/adc/ad7091r5.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7091R5 Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "ad7091r-base.h"
+
+static const struct iio_event_spec ad7091r5_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+	},
+};
+
+#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
+	.type = IIO_VOLTAGE, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.indexed = 1, \
+	.channel = idx, \
+	.event_spec = ev, \
+	.num_event_specs = num_ev, \
+}
+static const struct iio_chan_spec ad7091r5_channels_irq[] = {
+	AD7091R_CHANNEL(0, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+	AD7091R_CHANNEL(1, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+	AD7091R_CHANNEL(2, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+	AD7091R_CHANNEL(3, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+};
+
+static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
+	AD7091R_CHANNEL(0, 12, NULL, 0),
+	AD7091R_CHANNEL(1, 12, NULL, 0),
+	AD7091R_CHANNEL(2, 12, NULL, 0),
+	AD7091R_CHANNEL(3, 12, NULL, 0),
+};
+
+static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
+	.channels = ad7091r5_channels_irq,
+	.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
+};
+
+static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
+	.channels = ad7091r5_channels_noirq,
+	.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
+};
+
+static int ad7091r5_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	const struct ad7091r_chip_info *chip_info;
+	struct regmap *map = devm_regmap_init_i2c(i2c, &ad7091r_regmap_config);
+
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	if (i2c->irq)
+		chip_info = &ad7091r5_chip_info_irq;
+	else
+		chip_info = &ad7091r5_chip_info_noirq;
+
+	return ad7091r_probe(&i2c->dev, id->name, chip_info, map, i2c->irq);
+}
+
+static const struct of_device_id ad7091r5_dt_ids[] = {
+	{ .compatible = "adi,ad7091r5" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ad7091r5_dt_ids);
+
+static const struct i2c_device_id ad7091r5_i2c_ids[] = {
+	{"ad7091r5", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad7091r5_i2c_ids);
+
+static struct i2c_driver ad7091r5_driver = {
+	.driver = {
+		.name = "ad7091r5",
+		.of_match_table = ad7091r5_dt_ids,
+	},
+	.probe = ad7091r5_i2c_probe,
+	.id_table = ad7091r5_i2c_ids,
+};
+module_i2c_driver(ad7091r5_driver);
+
+MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7091R5 multi-channel ADC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

[PATCH v5 2/4] iio: adc: ad7091r5: Add scale and external VREF support

[Beniamin Bia]

From: Paul Cercueil <paul.cercueil@analog.com>

The scale can now be obtained with the "in_voltage_scale" file.
By default, the scale returned corresponds to the internal VREF of 2.5V.

It is possible to use an external VREF (through the REFIN/REFOUT pin of
the chip), by passing a regulator to the driver. The scale will then be
calculated according to the voltage reported by the regulator.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
Changes in v5:
-check if error is -eprobe instead of eprobe
-one bracket aligned

 drivers/iio/adc/ad7091r-base.c | 38 ++++++++++++++++++++++++++++++++++
 drivers/iio/adc/ad7091r-base.h |  1 +
 drivers/iio/adc/ad7091r5.c     |  5 +++++
 3 files changed, 44 insertions(+)

diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index 854de7c654c2..58fcf1ff8c76 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "ad7091r-base.h"
 
@@ -42,6 +43,7 @@ enum ad7091r_mode {
 struct ad7091r_state {
 	struct device *dev;
 	struct regmap *map;
+	struct regulator *vref;
 	const struct ad7091r_chip_info *chip_info;
 	enum ad7091r_mode mode;
 	struct mutex lock; /*lock to prevent concurent reads */
@@ -141,6 +143,21 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev,
 		ret = IIO_VAL_INT;
 		break;
 
+	case IIO_CHAN_INFO_SCALE:
+		if (st->vref) {
+			ret = regulator_get_voltage(st->vref);
+			if (ret < 0)
+				goto unlock;
+
+			*val = ret / 1000;
+		} else {
+			*val = st->chip_info->vref_mV;
+		}
+
+		*val2 = chan->scan_type.realbits;
+		ret = IIO_VAL_FRACTIONAL_LOG2;
+		break;
+
 	default:
 		ret = -EINVAL;
 		break;
@@ -183,6 +200,13 @@ static irqreturn_t ad7091r_event_handler(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+static void ad7091r_remove(void *data)
+{
+	struct ad7091r_state *st = data;
+
+	regulator_disable(st->vref);
+}
+
 int ad7091r_probe(struct device *dev, const char *name,
 		const struct ad7091r_chip_info *chip_info,
 		struct regmap *map, int irq)
@@ -216,6 +240,20 @@ int ad7091r_probe(struct device *dev, const char *name,
 			return ret;
 	}
 
+	st->vref = devm_regulator_get_optional(dev, "vref");
+	if (IS_ERR(st->vref)) {
+		if (PTR_ERR(st->reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		st->vref = NULL;
+	} else {
+		ret = regulator_enable(st->vref);
+		if (ret)
+			return ret;
+		ret = devm_add_action_or_reset(dev, ad7091r_remove, st);
+		if (ret)
+			return ret;
+	}
+
 	/* Use command mode by default to convert only desired channels*/
 	ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
 	if (ret)
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
index b0b4fe01a681..509748aef9b1 100644
--- a/drivers/iio/adc/ad7091r-base.h
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -14,6 +14,7 @@ struct ad7091r_state;
 struct ad7091r_chip_info {
 	unsigned int num_channels;
 	const struct iio_chan_spec *channels;
+	unsigned int vref_mV;
 };
 
 extern const struct regmap_config ad7091r_regmap_config;
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
index 30ff0108a6ed..9665679c3ea6 100644
--- a/drivers/iio/adc/ad7091r5.c
+++ b/drivers/iio/adc/ad7091r5.c
@@ -35,10 +35,13 @@ static const struct iio_event_spec ad7091r5_events[] = {
 #define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
 	.type = IIO_VOLTAGE, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 	.indexed = 1, \
 	.channel = idx, \
 	.event_spec = ev, \
 	.num_event_specs = num_ev, \
+	.scan_type.storagebits = 16, \
+	.scan_type.realbits = bits, \
 }
 static const struct iio_chan_spec ad7091r5_channels_irq[] = {
 	AD7091R_CHANNEL(0, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
@@ -57,11 +60,13 @@ static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
 static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
 	.channels = ad7091r5_channels_irq,
 	.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
+	.vref_mV = 2500,
 };
 
 static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
 	.channels = ad7091r5_channels_noirq,
 	.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
+	.vref_mV = 2500,
 };
 
 static int ad7091r5_i2c_probe(struct i2c_client *i2c,
-- 
2.17.1

Re: [PATCH v5 2/4] iio: adc: ad7091r5: Add scale and external VREF support

[Jonathan Cameron]

On Fri, 15 Nov 2019 15:57:21 +0200
Beniamin Bia <beniamin.bia@analog.com> wrote:

> From: Paul Cercueil <paul.cercueil@analog.com>
> 
> The scale can now be obtained with the "in_voltage_scale" file.
> By default, the scale returned corresponds to the internal VREF of 2.5V.
> 
> It is possible to use an external VREF (through the REFIN/REFOUT pin of
> the chip), by passing a regulator to the driver. The scale will then be
> calculated according to the voltage reported by the regulator.
> 
> Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
> Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>

Doesn't build.  However I've fixed it up and applied
to the togreg branch of iio.git pushed out as testing so the
build bots can run more tests.

Please check the result.

Jonathan

> ---
> Changes in v5:
> -check if error is -eprobe instead of eprobe
> -one bracket aligned
> 
>  drivers/iio/adc/ad7091r-base.c | 38 ++++++++++++++++++++++++++++++++++
>  drivers/iio/adc/ad7091r-base.h |  1 +
>  drivers/iio/adc/ad7091r5.c     |  5 +++++
>  3 files changed, 44 insertions(+)
> 
> diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
> index 854de7c654c2..58fcf1ff8c76 100644
> --- a/drivers/iio/adc/ad7091r-base.c
> +++ b/drivers/iio/adc/ad7091r-base.c
> @@ -11,6 +11,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include "ad7091r-base.h"
>  
> @@ -42,6 +43,7 @@ enum ad7091r_mode {
>  struct ad7091r_state {
>  	struct device *dev;
>  	struct regmap *map;
> +	struct regulator *vref;
>  	const struct ad7091r_chip_info *chip_info;
>  	enum ad7091r_mode mode;
>  	struct mutex lock; /*lock to prevent concurent reads */
> @@ -141,6 +143,21 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev,
>  		ret = IIO_VAL_INT;
>  		break;
>  
> +	case IIO_CHAN_INFO_SCALE:
> +		if (st->vref) {
> +			ret = regulator_get_voltage(st->vref);
> +			if (ret < 0)
> +				goto unlock;
> +
> +			*val = ret / 1000;
> +		} else {
> +			*val = st->chip_info->vref_mV;
> +		}
> +
> +		*val2 = chan->scan_type.realbits;
> +		ret = IIO_VAL_FRACTIONAL_LOG2;
> +		break;
> +
>  	default:
>  		ret = -EINVAL;
>  		break;
> @@ -183,6 +200,13 @@ static irqreturn_t ad7091r_event_handler(int irq, void *private)
>  	return IRQ_HANDLED;
>  }
>  
> +static void ad7091r_remove(void *data)
> +{
> +	struct ad7091r_state *st = data;
> +
> +	regulator_disable(st->vref);
> +}
> +
>  int ad7091r_probe(struct device *dev, const char *name,
>  		const struct ad7091r_chip_info *chip_info,
>  		struct regmap *map, int irq)
> @@ -216,6 +240,20 @@ int ad7091r_probe(struct device *dev, const char *name,
>  			return ret;
>  	}
>  
> +	st->vref = devm_regulator_get_optional(dev, "vref");
> +	if (IS_ERR(st->vref)) {
> +		if (PTR_ERR(st->reg) == -EPROBE_DEFER)

I'm going to optimistically hope this was a last minute edit and
you have tested this driver thoroughly.

st->vref?

> +			return -EPROBE_DEFER;
> +		st->vref = NULL;
> +	} else {
> +		ret = regulator_enable(st->vref);
> +		if (ret)
> +			return ret;
> +		ret = devm_add_action_or_reset(dev, ad7091r_remove, st);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	/* Use command mode by default to convert only desired channels*/
>  	ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
>  	if (ret)
> diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
> index b0b4fe01a681..509748aef9b1 100644
> --- a/drivers/iio/adc/ad7091r-base.h
> +++ b/drivers/iio/adc/ad7091r-base.h
> @@ -14,6 +14,7 @@ struct ad7091r_state;
>  struct ad7091r_chip_info {
>  	unsigned int num_channels;
>  	const struct iio_chan_spec *channels;
> +	unsigned int vref_mV;
>  };
>  
>  extern const struct regmap_config ad7091r_regmap_config;
> diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
> index 30ff0108a6ed..9665679c3ea6 100644
> --- a/drivers/iio/adc/ad7091r5.c
> +++ b/drivers/iio/adc/ad7091r5.c
> @@ -35,10 +35,13 @@ static const struct iio_event_spec ad7091r5_events[] = {
>  #define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
>  	.type = IIO_VOLTAGE, \
>  	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
>  	.indexed = 1, \
>  	.channel = idx, \
>  	.event_spec = ev, \
>  	.num_event_specs = num_ev, \
> +	.scan_type.storagebits = 16, \
> +	.scan_type.realbits = bits, \
>  }
>  static const struct iio_chan_spec ad7091r5_channels_irq[] = {
>  	AD7091R_CHANNEL(0, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
> @@ -57,11 +60,13 @@ static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
>  static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
>  	.channels = ad7091r5_channels_irq,
>  	.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
> +	.vref_mV = 2500,
>  };
>  
>  static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
>  	.channels = ad7091r5_channels_noirq,
>  	.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
> +	.vref_mV = 2500,
>  };
>  
>  static int ad7091r5_i2c_probe(struct i2c_client *i2c,

[PATCH v5 3/4] dt-binding: iio: Add documentation for AD7091R5

[Beniamin Bia]

Documentation for AD7091R5 ADC was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v5:
-nothing changed

 .../bindings/iio/adc/adi,ad7091r5.yaml        | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
new file mode 100644
index 000000000000..31ffa275f5fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+
+maintainers:
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Phandle to the vref power supply
+
+  interrupts:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@2f {
+                compatible = "adi,ad7091r5";
+                reg = <0x2f>;
+
+                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                interrupt-parent = <&gpio>;
+        };
+    };
+...
-- 
2.17.1

Re: [PATCH v5 3/4] dt-binding: iio: Add documentation for AD7091R5

[Jonathan Cameron]

On Fri, 15 Nov 2019 15:57:22 +0200
Beniamin Bia <beniamin.bia@analog.com> wrote:

> Documentation for AD7091R5 ADC was added.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied.

Thanks,

Jonathan

> ---
> Changes in v5:
> -nothing changed
> 
>  .../bindings/iio/adc/adi,ad7091r5.yaml        | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
> new file mode 100644
> index 000000000000..31ffa275f5fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
> +
> +maintainers:
> +  - Beniamin Bia <beniamin.bia@analog.com>
> +
> +description: |
> +  Analog Devices AD7091R5 4-Channel 12-Bit ADC
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7091r5
> +
> +  reg:
> +    maxItems: 1
> +
> +  vref-supply:
> +    description:
> +      Phandle to the vref power supply
> +
> +  interrupts:
> +    maxItems: 1
> +
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@2f {
> +                compatible = "adi,ad7091r5";
> +                reg = <0x2f>;
> +
> +                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> +                interrupt-parent = <&gpio>;
> +        };
> +    };
> +...

[PATCH v5 4/4] MAINTAINERS: add entry for AD7091R5 driver

[Beniamin Bia]

Add Beniamin Bia as a maintainer for AD7091R5 ADC.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
Changes in v5:
-nothing changed

 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2e01d0f0b0e5..7f1e4b88688f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -893,6 +893,14 @@ S:	Supported
 F:	drivers/iio/dac/ad5758.c
 F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
 
+ANALOG DEVICES INC AD7091R5 DRIVER
+M:	Beniamin Bia <beniamin.bia@analog.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/adc/ad7091r5.c
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+
 ANALOG DEVICES INC AD7124 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-iio@vger.kernel.org
-- 
2.17.1

Re: [PATCH v5 4/4] MAINTAINERS: add entry for AD7091R5 driver

[Jonathan Cameron]

On Fri, 15 Nov 2019 15:57:23 +0200
Beniamin Bia <beniamin.bia@analog.com> wrote:

> Add Beniamin Bia as a maintainer for AD7091R5 ADC.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied,

Thanks,

Jonathan

> ---
> Changes in v5:
> -nothing changed
> 
>  MAINTAINERS | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2e01d0f0b0e5..7f1e4b88688f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -893,6 +893,14 @@ S:	Supported
>  F:	drivers/iio/dac/ad5758.c
>  F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
>  
> +ANALOG DEVICES INC AD7091R5 DRIVER
> +M:	Beniamin Bia <beniamin.bia@analog.com>
> +L:	linux-iio@vger.kernel.org
> +W:	http://ez.analog.com/community/linux-device-drivers
> +S:	Supported
> +F:	drivers/iio/adc/ad7091r5.c
> +F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
> +
>  ANALOG DEVICES INC AD7124 DRIVER
>  M:	Stefan Popa <stefan.popa@analog.com>
>  L:	linux-iio@vger.kernel.org

Re: [PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC

[Jonathan Cameron]

On Fri, 15 Nov 2019 15:57:20 +0200
Beniamin Bia <beniamin.bia@analog.com> wrote:

> From: Paul Cercueil <paul.cercueil@analog.com>
> 
> AD7091R5 is 4-Channel, I2C, Ultra Low Power,12-Bit ADC.
> 
> This driver will also support AD7091R2/4/8 in the future.
> 
> Datasheet:
> Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
> 
> Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
> Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes in v5:
> -nothing changed
> 
>  drivers/iio/adc/Kconfig        |   7 +
>  drivers/iio/adc/Makefile       |   1 +
>  drivers/iio/adc/ad7091r-base.c | 260 +++++++++++++++++++++++++++++++++
>  drivers/iio/adc/ad7091r-base.h |  25 ++++
>  drivers/iio/adc/ad7091r5.c     | 108 ++++++++++++++
>  5 files changed, 401 insertions(+)
>  create mode 100644 drivers/iio/adc/ad7091r-base.c
>  create mode 100644 drivers/iio/adc/ad7091r-base.h
>  create mode 100644 drivers/iio/adc/ad7091r5.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 7e3286265a38..80b1b9551749 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -22,6 +22,13 @@ config AD7124
>  	  To compile this driver as a module, choose M here: the module will be
>  	  called ad7124.
>  
> +config AD7091R5
> +	tristate "Analog Devices AD7091R5 ADC Driver"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  Say yes here to build support for Analog Devices AD7091R-5 ADC.
> +
>  config AD7266
>  	tristate "Analog Devices AD7265/AD7266 ADC driver"
>  	depends on SPI_MASTER
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index ef9cc485fb67..55e44735aaac 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -6,6 +6,7 @@
>  # When adding new entries keep the list in alphabetical order
>  obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
>  obj-$(CONFIG_AD7124) += ad7124.o
> +obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
>  obj-$(CONFIG_AD7266) += ad7266.o
>  obj-$(CONFIG_AD7291) += ad7291.o
>  obj-$(CONFIG_AD7298) += ad7298.o
> diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
> new file mode 100644
> index 000000000000..854de7c654c2
> --- /dev/null
> +++ b/drivers/iio/adc/ad7091r-base.c
> @@ -0,0 +1,260 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * AD7091RX Analog to Digital converter driver
> + *
> + * Copyright 2014-2019 Analog Devices Inc.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/iio.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "ad7091r-base.h"
> +
> +#define AD7091R_REG_RESULT  0
> +#define AD7091R_REG_CHANNEL 1
> +#define AD7091R_REG_CONF    2
> +#define AD7091R_REG_ALERT   3
> +#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
> +#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
> +#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
> +
> +/* AD7091R_REG_RESULT */
> +#define AD7091R_REG_RESULT_CH_ID(x)	    (((x) >> 13) & 0x3)
> +#define AD7091R_REG_RESULT_CONV_RESULT(x)   ((x) & 0xfff)
> +
> +/* AD7091R_REG_CONF */
> +#define AD7091R_REG_CONF_AUTO   BIT(8)
> +#define AD7091R_REG_CONF_CMD    BIT(10)
> +
> +#define AD7091R_REG_CONF_MODE_MASK  \
> +	(AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
> +
> +enum ad7091r_mode {
> +	AD7091R_MODE_SAMPLE,
> +	AD7091R_MODE_COMMAND,
> +	AD7091R_MODE_AUTOCYCLE,
> +};
> +
> +struct ad7091r_state {
> +	struct device *dev;
> +	struct regmap *map;
> +	const struct ad7091r_chip_info *chip_info;
> +	enum ad7091r_mode mode;
> +	struct mutex lock; /*lock to prevent concurent reads */
> +};
> +
> +static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
> +{
> +	int ret, conf;
> +
> +	switch (mode) {
> +	case AD7091R_MODE_SAMPLE:
> +		conf = 0;
> +		break;
> +	case AD7091R_MODE_COMMAND:
> +		conf = AD7091R_REG_CONF_CMD;
> +		break;
> +	case AD7091R_MODE_AUTOCYCLE:
> +		conf = AD7091R_REG_CONF_AUTO;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
> +				 AD7091R_REG_CONF_MODE_MASK, conf);
> +	if (ret)
> +		return ret;
> +
> +	st->mode = mode;
> +
> +	return 0;
> +}
> +
> +static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
> +{
> +	unsigned int dummy;
> +	int ret;
> +
> +	/* AD7091R_REG_CHANNEL specified which channels to be converted */
> +	ret = regmap_write(st->map, AD7091R_REG_CHANNEL,
> +			BIT(channel) | (BIT(channel) << 8));
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * There is a latency of one conversion before the channel conversion
> +	 * sequence is updated
> +	 */
> +	return regmap_read(st->map, AD7091R_REG_RESULT, &dummy);
> +}
> +
> +static int ad7091r_read_one(struct iio_dev *iio_dev,
> +		unsigned int channel, unsigned int *read_val)
> +{
> +	struct ad7091r_state *st = iio_priv(iio_dev);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = ad7091r_set_channel(st, channel);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_read(st->map, AD7091R_REG_RESULT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (AD7091R_REG_RESULT_CH_ID(val) != channel)
> +		return -EIO;
> +
> +	*read_val = AD7091R_REG_RESULT_CONV_RESULT(val);
> +
> +	return 0;
> +}
> +
> +static int ad7091r_read_raw(struct iio_dev *iio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val, int *val2, long m)
> +{
> +	struct ad7091r_state *st = iio_priv(iio_dev);
> +	unsigned int read_val;
> +	int ret;
> +
> +	mutex_lock(&st->lock);
> +
> +	switch (m) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (st->mode != AD7091R_MODE_COMMAND) {
> +			ret = -EBUSY;
> +			goto unlock;
> +		}
> +
> +		ret = ad7091r_read_one(iio_dev, chan->channel, &read_val);
> +		if (ret)
> +			goto unlock;
> +
> +		*val = read_val;
> +		ret = IIO_VAL_INT;
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +unlock:
> +	mutex_unlock(&st->lock);
> +	return ret;
> +}
> +
> +static const struct iio_info ad7091r_info = {
> +	.read_raw = ad7091r_read_raw,
> +};
> +
> +static irqreturn_t ad7091r_event_handler(int irq, void *private)
> +{
> +	struct ad7091r_state *st = (struct ad7091r_state *) private;
> +	struct iio_dev *iio_dev = dev_get_drvdata(st->dev);
> +	unsigned int i, read_val;
> +	int ret;
> +	s64 timestamp = iio_get_time_ns(iio_dev);
> +
> +	ret = regmap_read(st->map, AD7091R_REG_ALERT, &read_val);
> +	if (ret)
> +		return IRQ_HANDLED;
> +
> +	for (i = 0; i < st->chip_info->num_channels; i++) {
> +		if (read_val & BIT(i * 2))
> +			iio_push_event(iio_dev,
> +					IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
> +						IIO_EV_TYPE_THRESH,
> +						IIO_EV_DIR_RISING), timestamp);
> +		if (read_val & BIT(i * 2 + 1))
> +			iio_push_event(iio_dev,
> +					IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
> +						IIO_EV_TYPE_THRESH,
> +						IIO_EV_DIR_FALLING), timestamp);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +int ad7091r_probe(struct device *dev, const char *name,
> +		const struct ad7091r_chip_info *chip_info,
> +		struct regmap *map, int irq)
> +{
> +	struct iio_dev *iio_dev;
> +	struct ad7091r_state *st;
> +	int ret;
> +
> +	iio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!iio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(iio_dev);
> +	st->dev = dev;
> +	st->chip_info = chip_info;
> +	st->map = map;
> +
> +	iio_dev->dev.parent = dev;
> +	iio_dev->name = name;
> +	iio_dev->info = &ad7091r_info;
> +	iio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	iio_dev->num_channels = chip_info->num_channels;
> +	iio_dev->channels = chip_info->channels;
> +
> +	if (irq) {
> +		ret = devm_request_threaded_irq(dev, irq, NULL,
> +				ad7091r_event_handler,
> +				IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Use command mode by default to convert only desired channels*/
> +	ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(dev, iio_dev);
> +}
> +EXPORT_SYMBOL_GPL(ad7091r_probe);
> +
> +static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case AD7091R_REG_RESULT:
> +	case AD7091R_REG_ALERT:
> +		return false;
> +	default:
> +		return true;
> +	}
> +}
> +
> +static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case AD7091R_REG_RESULT:
> +	case AD7091R_REG_ALERT:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +const struct regmap_config ad7091r_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 16,
> +	.writeable_reg = ad7091r_writeable_reg,
> +	.volatile_reg = ad7091r_volatile_reg,
> +};
> +EXPORT_SYMBOL_GPL(ad7091r_regmap_config);
> +
> +MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7091Rx multi-channel converters");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
> new file mode 100644
> index 000000000000..b0b4fe01a681
> --- /dev/null
> +++ b/drivers/iio/adc/ad7091r-base.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * AD7091RX Analog to Digital converter driver
> + *
> + * Copyright 2014-2019 Analog Devices Inc.
> + */
> +
> +#ifndef __DRIVERS_IIO_ADC_AD7091R_BASE_H__
> +#define __DRIVERS_IIO_ADC_AD7091R_BASE_H__
> +
> +struct device;
> +struct ad7091r_state;
> +
> +struct ad7091r_chip_info {
> +	unsigned int num_channels;
> +	const struct iio_chan_spec *channels;
> +};
> +
> +extern const struct regmap_config ad7091r_regmap_config;
> +
> +int ad7091r_probe(struct device *dev, const char *name,
> +		const struct ad7091r_chip_info *chip_info,
> +		struct regmap *map, int irq);
> +
> +#endif /* __DRIVERS_IIO_ADC_AD7091R_BASE_H__ */
> diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
> new file mode 100644
> index 000000000000..30ff0108a6ed
> --- /dev/null
> +++ b/drivers/iio/adc/ad7091r5.c
> @@ -0,0 +1,108 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * AD7091R5 Analog to Digital converter driver
> + *
> + * Copyright 2014-2019 Analog Devices Inc.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "ad7091r-base.h"
> +
> +static const struct iio_event_spec ad7091r5_events[] = {
> +	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_RISING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
> +				 BIT(IIO_EV_INFO_ENABLE),
> +	},
> +	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_FALLING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
> +				 BIT(IIO_EV_INFO_ENABLE),
> +	},
> +	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_EITHER,
> +		.mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
> +	},
> +};
> +
> +#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
> +	.type = IIO_VOLTAGE, \
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> +	.indexed = 1, \
> +	.channel = idx, \
> +	.event_spec = ev, \
> +	.num_event_specs = num_ev, \
> +}
> +static const struct iio_chan_spec ad7091r5_channels_irq[] = {
> +	AD7091R_CHANNEL(0, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
> +	AD7091R_CHANNEL(1, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
> +	AD7091R_CHANNEL(2, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
> +	AD7091R_CHANNEL(3, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
> +};
> +
> +static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
> +	AD7091R_CHANNEL(0, 12, NULL, 0),
> +	AD7091R_CHANNEL(1, 12, NULL, 0),
> +	AD7091R_CHANNEL(2, 12, NULL, 0),
> +	AD7091R_CHANNEL(3, 12, NULL, 0),
> +};
> +
> +static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
> +	.channels = ad7091r5_channels_irq,
> +	.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
> +};
> +
> +static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
> +	.channels = ad7091r5_channels_noirq,
> +	.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
> +};
> +
> +static int ad7091r5_i2c_probe(struct i2c_client *i2c,
> +		const struct i2c_device_id *id)
> +{
> +	const struct ad7091r_chip_info *chip_info;
> +	struct regmap *map = devm_regmap_init_i2c(i2c, &ad7091r_regmap_config);
> +
> +	if (IS_ERR(map))
> +		return PTR_ERR(map);
> +
> +	if (i2c->irq)
> +		chip_info = &ad7091r5_chip_info_irq;
> +	else
> +		chip_info = &ad7091r5_chip_info_noirq;
> +
> +	return ad7091r_probe(&i2c->dev, id->name, chip_info, map, i2c->irq);
> +}
> +
> +static const struct of_device_id ad7091r5_dt_ids[] = {
> +	{ .compatible = "adi,ad7091r5" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ad7091r5_dt_ids);
> +
> +static const struct i2c_device_id ad7091r5_i2c_ids[] = {
> +	{"ad7091r5", 0},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, ad7091r5_i2c_ids);
> +
> +static struct i2c_driver ad7091r5_driver = {
> +	.driver = {
> +		.name = "ad7091r5",
> +		.of_match_table = ad7091r5_dt_ids,
> +	},
> +	.probe = ad7091r5_i2c_probe,
> +	.id_table = ad7091r5_i2c_ids,
> +};
> +module_i2c_driver(ad7091r5_driver);
> +
> +MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7091R5 multi-channel ADC driver");
> +MODULE_LICENSE("GPL v2");