* [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map
@ 2019-11-15 13:54 Adrian Hunter
2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
0 siblings, 2 replies; 7+ messages in thread
From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw)
To: x86
Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin,
Andi Kleen, Peter Zijlstra, Masami Hiramatsu
Hi
Here is a patch to update the x86 opcode map, and a patch to update the
perf tools' "new instructions" test accordingly.
There are still a lot of AVX instructions to add and also
CET instructions, which Yu-cheng is adding.
Adrian Hunter (2):
x86/insn: perf tools: Add some instructions to the new instructions test
x86/insn: Add some Intel instructions to the opcode map
arch/x86/lib/x86-opcode-map.txt | 18 +++--
tools/arch/x86/lib/x86-opcode-map.txt | 18 +++--
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 +++++++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++++++++++
5 files changed, 247 insertions(+), 12 deletions(-)
Regards
Adrian
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test 2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter @ 2019-11-15 13:54 ` Adrian Hunter 2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter 2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter 1 sibling, 1 reply; 7+ messages in thread From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw) To: x86 Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel, Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin, Andi Kleen, Peter Zijlstra, Masami Hiramatsu Add to the "x86 instruction decoder - new instructions" test the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> --- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++ tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 +++++++++++ tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++ 3 files changed, 223 insertions(+) diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-32.c b/tools/perf/arch/x86/tests/insn-x86-dat-32.c index fab3c6de73fa..58f8f2a095c4 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-32.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-32.c @@ -1647,6 +1647,12 @@ "0f ae 30 \txsaveopt (%eax)",}, {{0x0f, 0xae, 0xf0, }, 3, 0, "", "", "0f ae f0 \tmfence ",}, +{{0x0f, 0x1c, 0x00, }, 3, 0, "", "", +"0f 1c 00 \tcldemote (%eax)",}, +{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", +"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",}, +{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",}, {{0x0f, 0xc7, 0x20, }, 3, 0, "", "", "0f c7 20 \txsavec (%eax)",}, {{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", @@ -1677,3 +1683,49 @@ "f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",}, {{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", "f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",}, +{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "", +"66 0f ae f3 \ttpause %ebx",}, +{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"67 f3 0f ae f0 \tumonitor %ax",}, +{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f3 0f ae f0 \tumonitor %eax",}, +{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f2 0f ae f0 \tumwait %eax",}, +{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "", +"0f 38 f9 03 \tmovdiri %eax,(%ebx)",}, +{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 66 0f 38 f8 1c \tmovdir64b (%si),%bx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 f2 0f 38 f8 1c \tenqcmd (%si),%bx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",}, +{{0x0f, 0x01, 0xcf, }, 3, 0, "", "", +"0f 01 cf \tencls ",}, +{{0x0f, 0x01, 0xd7, }, 3, 0, "", "", +"0f 01 d7 \tenclu ",}, +{{0x0f, 0x01, 0xc0, }, 3, 0, "", "", +"0f 01 c0 \tenclv ",}, +{{0x0f, 0x01, 0xc5, }, 3, 0, "", "", +"0f 01 c5 \tpconfig ",}, +{{0xf3, 0x0f, 0x09, }, 3, 0, "", "", +"f3 0f 09 \twbnoinvd ",}, diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-64.c b/tools/perf/arch/x86/tests/insn-x86-dat-64.c index c57f34603b9b..656f8aed31de 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-64.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-64.c @@ -1667,6 +1667,16 @@ "41 0f ae 30 \txsaveopt (%r8)",}, {{0x0f, 0xae, 0xf0, }, 3, 0, "", "", "0f ae f0 \tmfence ",}, +{{0x0f, 0x1c, 0x00, }, 3, 0, "", "", +"0f 1c 00 \tcldemote (%rax)",}, +{{0x41, 0x0f, 0x1c, 0x00, }, 4, 0, "", "", +"41 0f 1c 00 \tcldemote (%r8)",}, +{{0x0f, 0x1c, 0x04, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 04 25 78 56 34 12 \tcldemote 0x12345678",}, +{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%rax,%rcx,8)",}, +{{0x41, 0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"41 0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%r8,%rcx,8)",}, {{0x0f, 0xc7, 0x20, }, 3, 0, "", "", "0f c7 20 \txsavec (%rax)",}, {{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "", @@ -1727,3 +1737,55 @@ "f3 48 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%rax,%rcx,8)",}, {{0xf3, 0x49, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", "f3 49 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%r8,%rcx,8)",}, +{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "", +"66 0f ae f3 \ttpause %ebx",}, +{{0x66, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"66 41 0f ae f0 \ttpause %r8d",}, +{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"67 f3 0f ae f0 \tumonitor %eax",}, +{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f3 0f ae f0 \tumonitor %rax",}, +{{0x67, 0xf3, 0x41, 0x0f, 0xae, 0xf0, }, 6, 0, "", "", +"67 f3 41 0f ae f0 \tumonitor %r8d",}, +{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f2 0f ae f0 \tumwait %eax",}, +{{0xf2, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"f2 41 0f ae f0 \tumwait %r8d",}, +{{0x48, 0x0f, 0x38, 0xf9, 0x03, }, 5, 0, "", "", +"48 0f 38 f9 03 \tmovdiri %rax,(%rbx)",}, +{{0x48, 0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"48 0f 38 f9 88 78 56 34 12 \tmovdiri %rcx,0x12345678(%rax)",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"66 0f 38 f8 18 \tmovdir64b (%rax),%rbx",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%rax),%rcx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f2 0f 38 f8 18 \tenqcmd (%rax),%rbx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%rax),%rcx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f3 0f 38 f8 18 \tenqcmds (%rax),%rbx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%rax),%rcx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",}, +{{0x0f, 0x01, 0xcf, }, 3, 0, "", "", +"0f 01 cf \tencls ",}, +{{0x0f, 0x01, 0xd7, }, 3, 0, "", "", +"0f 01 d7 \tenclu ",}, +{{0x0f, 0x01, 0xc0, }, 3, 0, "", "", +"0f 01 c0 \tenclv ",}, +{{0x0f, 0x01, 0xc5, }, 3, 0, "", "", +"0f 01 c5 \tpconfig ",}, +{{0xf3, 0x0f, 0x09, }, 3, 0, "", "", +"f3 0f 09 \twbnoinvd ",}, diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-src.c b/tools/perf/arch/x86/tests/insn-x86-dat-src.c index 891415b10984..dd85a3afd9ce 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-src.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-src.c @@ -1320,6 +1320,14 @@ int main(void) asm volatile("xsaveopt (%r8)"); asm volatile("mfence"); + /* cldemote m8 */ + + asm volatile("cldemote (%rax)"); + asm volatile("cldemote (%r8)"); + asm volatile("cldemote (0x12345678)"); + asm volatile("cldemote 0x12345678(%rax,%rcx,8)"); + asm volatile("cldemote 0x12345678(%r8,%rcx,8)"); + /* xsavec mem */ asm volatile("xsavec (%rax)"); @@ -1364,6 +1372,48 @@ int main(void) asm volatile("ptwriteq 0x12345678(%rax,%rcx,8)"); asm volatile("ptwriteq 0x12345678(%r8,%rcx,8)"); + /* tpause */ + + asm volatile("tpause %ebx"); + asm volatile("tpause %r8d"); + + /* umonitor */ + + asm volatile("umonitor %eax"); + asm volatile("umonitor %rax"); + asm volatile("umonitor %r8d"); + + /* umwait */ + + asm volatile("umwait %eax"); + asm volatile("umwait %r8d"); + + /* movdiri */ + + asm volatile("movdiri %rax,(%rbx)"); + asm volatile("movdiri %rcx,0x12345678(%rax)"); + + /* movdir64b */ + + asm volatile("movdir64b (%rax),%rbx"); + asm volatile("movdir64b 0x12345678(%rax),%rcx"); + asm volatile("movdir64b (%eax),%ebx"); + asm volatile("movdir64b 0x12345678(%eax),%ecx"); + + /* enqcmd */ + + asm volatile("enqcmd (%rax),%rbx"); + asm volatile("enqcmd 0x12345678(%rax),%rcx"); + asm volatile("enqcmd (%eax),%ebx"); + asm volatile("enqcmd 0x12345678(%eax),%ecx"); + + /* enqcmds */ + + asm volatile("enqcmds (%rax),%rbx"); + asm volatile("enqcmds 0x12345678(%rax),%rcx"); + asm volatile("enqcmds (%eax),%ebx"); + asm volatile("enqcmds 0x12345678(%eax),%ecx"); + #else /* #ifdef __x86_64__ */ /* bound r32, mem (same op code as EVEX prefix) */ @@ -2656,6 +2706,12 @@ int main(void) asm volatile("xsaveopt (%eax)"); asm volatile("mfence"); + /* cldemote m8 */ + + asm volatile("cldemote (%eax)"); + asm volatile("cldemote (0x12345678)"); + asm volatile("cldemote 0x12345678(%eax,%ecx,8)"); + /* xsavec mem */ asm volatile("xsavec (%eax)"); @@ -2684,8 +2740,61 @@ int main(void) asm volatile("ptwritel (0x12345678)"); asm volatile("ptwritel 0x12345678(%eax,%ecx,8)"); + /* tpause */ + + asm volatile("tpause %ebx"); + + /* umonitor */ + + asm volatile("umonitor %ax"); + asm volatile("umonitor %eax"); + + /* umwait */ + + asm volatile("umwait %eax"); + + /* movdiri */ + + asm volatile("movdiri %eax,(%ebx)"); + asm volatile("movdiri %ecx,0x12345678(%eax)"); + + /* movdir64b */ + + asm volatile("movdir64b (%eax),%ebx"); + asm volatile("movdir64b 0x12345678(%eax),%ecx"); + asm volatile("movdir64b (%si),%bx"); + asm volatile("movdir64b 0x1234(%si),%cx"); + + /* enqcmd */ + + asm volatile("enqcmd (%eax),%ebx"); + asm volatile("enqcmd 0x12345678(%eax),%ecx"); + asm volatile("enqcmd (%si),%bx"); + asm volatile("enqcmd 0x1234(%si),%cx"); + + /* enqcmds */ + + asm volatile("enqcmds (%eax),%ebx"); + asm volatile("enqcmds 0x12345678(%eax),%ecx"); + asm volatile("enqcmds (%si),%bx"); + asm volatile("enqcmds 0x1234(%si),%cx"); + #endif /* #ifndef __x86_64__ */ + /* SGX */ + + asm volatile("encls"); + asm volatile("enclu"); + asm volatile("enclv"); + + /* pconfig */ + + asm volatile("pconfig"); + + /* wbnoinvd */ + + asm volatile("wbnoinvd"); + /* Following line is a marker for the awk script - do not change */ asm volatile("rdtsc"); /* Stop here */ -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [tip: perf/core] x86/insn: perf tools: Add some instructions to the new instructions test 2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter @ 2019-11-19 16:56 ` tip-bot2 for Adrian Hunter 0 siblings, 0 replies; 7+ messages in thread From: tip-bot2 for Adrian Hunter @ 2019-11-19 16:56 UTC (permalink / raw) To: linux-tip-commits Cc: Adrian Hunter, Andi Kleen, Borislav Petkov, H. Peter Anvin, Jiri Olsa, Masami Hiramatsu, Peter Zijlstra, Thomas Gleixner, x86, Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel The following commit has been merged into the perf/core branch of tip: Commit-ID: 1e5f015442e7b700941f8cd0274bb14962b3d78e Gitweb: https://git.kernel.org/tip/1e5f015442e7b700941f8cd0274bb14962b3d78e Author: Adrian Hunter <adrian.hunter@intel.com> AuthorDate: Fri, 15 Nov 2019 15:54:46 +02:00 Committer: Arnaldo Carvalho de Melo <acme@redhat.com> CommitterDate: Mon, 18 Nov 2019 18:53:54 -03:00 x86/insn: perf tools: Add some instructions to the new instructions test Add to the "x86 instruction decoder - new instructions" test the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> --- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++- tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 ++++++++++- tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 ++++++++++++++++++- 3 files changed, 223 insertions(+) diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-32.c b/tools/perf/arch/x86/tests/insn-x86-dat-32.c index fab3c6d..58f8f2a 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-32.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-32.c @@ -1647,6 +1647,12 @@ "0f ae 30 \txsaveopt (%eax)",}, {{0x0f, 0xae, 0xf0, }, 3, 0, "", "", "0f ae f0 \tmfence ",}, +{{0x0f, 0x1c, 0x00, }, 3, 0, "", "", +"0f 1c 00 \tcldemote (%eax)",}, +{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", +"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",}, +{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",}, {{0x0f, 0xc7, 0x20, }, 3, 0, "", "", "0f c7 20 \txsavec (%eax)",}, {{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", @@ -1677,3 +1683,49 @@ "f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",}, {{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", "f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",}, +{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "", +"66 0f ae f3 \ttpause %ebx",}, +{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"67 f3 0f ae f0 \tumonitor %ax",}, +{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f3 0f ae f0 \tumonitor %eax",}, +{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f2 0f ae f0 \tumwait %eax",}, +{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "", +"0f 38 f9 03 \tmovdiri %eax,(%ebx)",}, +{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 66 0f 38 f8 1c \tmovdir64b (%si),%bx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 f2 0f 38 f8 1c \tenqcmd (%si),%bx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "", +"67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", +"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",}, +{{0x0f, 0x01, 0xcf, }, 3, 0, "", "", +"0f 01 cf \tencls ",}, +{{0x0f, 0x01, 0xd7, }, 3, 0, "", "", +"0f 01 d7 \tenclu ",}, +{{0x0f, 0x01, 0xc0, }, 3, 0, "", "", +"0f 01 c0 \tenclv ",}, +{{0x0f, 0x01, 0xc5, }, 3, 0, "", "", +"0f 01 c5 \tpconfig ",}, +{{0xf3, 0x0f, 0x09, }, 3, 0, "", "", +"f3 0f 09 \twbnoinvd ",}, diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-64.c b/tools/perf/arch/x86/tests/insn-x86-dat-64.c index c57f346..656f8ae 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-64.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-64.c @@ -1667,6 +1667,16 @@ "41 0f ae 30 \txsaveopt (%r8)",}, {{0x0f, 0xae, 0xf0, }, 3, 0, "", "", "0f ae f0 \tmfence ",}, +{{0x0f, 0x1c, 0x00, }, 3, 0, "", "", +"0f 1c 00 \tcldemote (%rax)",}, +{{0x41, 0x0f, 0x1c, 0x00, }, 4, 0, "", "", +"41 0f 1c 00 \tcldemote (%r8)",}, +{{0x0f, 0x1c, 0x04, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 04 25 78 56 34 12 \tcldemote 0x12345678",}, +{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%rax,%rcx,8)",}, +{{0x41, 0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"41 0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%r8,%rcx,8)",}, {{0x0f, 0xc7, 0x20, }, 3, 0, "", "", "0f c7 20 \txsavec (%rax)",}, {{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "", @@ -1727,3 +1737,55 @@ "f3 48 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%rax,%rcx,8)",}, {{0xf3, 0x49, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", "f3 49 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%r8,%rcx,8)",}, +{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "", +"66 0f ae f3 \ttpause %ebx",}, +{{0x66, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"66 41 0f ae f0 \ttpause %r8d",}, +{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"67 f3 0f ae f0 \tumonitor %eax",}, +{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f3 0f ae f0 \tumonitor %rax",}, +{{0x67, 0xf3, 0x41, 0x0f, 0xae, 0xf0, }, 6, 0, "", "", +"67 f3 41 0f ae f0 \tumonitor %r8d",}, +{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "", +"f2 0f ae f0 \tumwait %eax",}, +{{0xf2, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "", +"f2 41 0f ae f0 \tumwait %r8d",}, +{{0x48, 0x0f, 0x38, 0xf9, 0x03, }, 5, 0, "", "", +"48 0f 38 f9 03 \tmovdiri %rax,(%rbx)",}, +{{0x48, 0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"48 0f 38 f9 88 78 56 34 12 \tmovdiri %rcx,0x12345678(%rax)",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"66 0f 38 f8 18 \tmovdir64b (%rax),%rbx",}, +{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%rax),%rcx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",}, +{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f2 0f 38 f8 18 \tenqcmd (%rax),%rbx",}, +{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%rax),%rcx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",}, +{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "", +"f3 0f 38 f8 18 \tenqcmds (%rax),%rbx",}, +{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%rax),%rcx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "", +"67 f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",}, +{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"67 f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",}, +{{0x0f, 0x01, 0xcf, }, 3, 0, "", "", +"0f 01 cf \tencls ",}, +{{0x0f, 0x01, 0xd7, }, 3, 0, "", "", +"0f 01 d7 \tenclu ",}, +{{0x0f, 0x01, 0xc0, }, 3, 0, "", "", +"0f 01 c0 \tenclv ",}, +{{0x0f, 0x01, 0xc5, }, 3, 0, "", "", +"0f 01 c5 \tpconfig ",}, +{{0xf3, 0x0f, 0x09, }, 3, 0, "", "", +"f3 0f 09 \twbnoinvd ",}, diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-src.c b/tools/perf/arch/x86/tests/insn-x86-dat-src.c index 891415b..dd85a3a 100644 --- a/tools/perf/arch/x86/tests/insn-x86-dat-src.c +++ b/tools/perf/arch/x86/tests/insn-x86-dat-src.c @@ -1320,6 +1320,14 @@ int main(void) asm volatile("xsaveopt (%r8)"); asm volatile("mfence"); + /* cldemote m8 */ + + asm volatile("cldemote (%rax)"); + asm volatile("cldemote (%r8)"); + asm volatile("cldemote (0x12345678)"); + asm volatile("cldemote 0x12345678(%rax,%rcx,8)"); + asm volatile("cldemote 0x12345678(%r8,%rcx,8)"); + /* xsavec mem */ asm volatile("xsavec (%rax)"); @@ -1364,6 +1372,48 @@ int main(void) asm volatile("ptwriteq 0x12345678(%rax,%rcx,8)"); asm volatile("ptwriteq 0x12345678(%r8,%rcx,8)"); + /* tpause */ + + asm volatile("tpause %ebx"); + asm volatile("tpause %r8d"); + + /* umonitor */ + + asm volatile("umonitor %eax"); + asm volatile("umonitor %rax"); + asm volatile("umonitor %r8d"); + + /* umwait */ + + asm volatile("umwait %eax"); + asm volatile("umwait %r8d"); + + /* movdiri */ + + asm volatile("movdiri %rax,(%rbx)"); + asm volatile("movdiri %rcx,0x12345678(%rax)"); + + /* movdir64b */ + + asm volatile("movdir64b (%rax),%rbx"); + asm volatile("movdir64b 0x12345678(%rax),%rcx"); + asm volatile("movdir64b (%eax),%ebx"); + asm volatile("movdir64b 0x12345678(%eax),%ecx"); + + /* enqcmd */ + + asm volatile("enqcmd (%rax),%rbx"); + asm volatile("enqcmd 0x12345678(%rax),%rcx"); + asm volatile("enqcmd (%eax),%ebx"); + asm volatile("enqcmd 0x12345678(%eax),%ecx"); + + /* enqcmds */ + + asm volatile("enqcmds (%rax),%rbx"); + asm volatile("enqcmds 0x12345678(%rax),%rcx"); + asm volatile("enqcmds (%eax),%ebx"); + asm volatile("enqcmds 0x12345678(%eax),%ecx"); + #else /* #ifdef __x86_64__ */ /* bound r32, mem (same op code as EVEX prefix) */ @@ -2656,6 +2706,12 @@ int main(void) asm volatile("xsaveopt (%eax)"); asm volatile("mfence"); + /* cldemote m8 */ + + asm volatile("cldemote (%eax)"); + asm volatile("cldemote (0x12345678)"); + asm volatile("cldemote 0x12345678(%eax,%ecx,8)"); + /* xsavec mem */ asm volatile("xsavec (%eax)"); @@ -2684,8 +2740,61 @@ int main(void) asm volatile("ptwritel (0x12345678)"); asm volatile("ptwritel 0x12345678(%eax,%ecx,8)"); + /* tpause */ + + asm volatile("tpause %ebx"); + + /* umonitor */ + + asm volatile("umonitor %ax"); + asm volatile("umonitor %eax"); + + /* umwait */ + + asm volatile("umwait %eax"); + + /* movdiri */ + + asm volatile("movdiri %eax,(%ebx)"); + asm volatile("movdiri %ecx,0x12345678(%eax)"); + + /* movdir64b */ + + asm volatile("movdir64b (%eax),%ebx"); + asm volatile("movdir64b 0x12345678(%eax),%ecx"); + asm volatile("movdir64b (%si),%bx"); + asm volatile("movdir64b 0x1234(%si),%cx"); + + /* enqcmd */ + + asm volatile("enqcmd (%eax),%ebx"); + asm volatile("enqcmd 0x12345678(%eax),%ecx"); + asm volatile("enqcmd (%si),%bx"); + asm volatile("enqcmd 0x1234(%si),%cx"); + + /* enqcmds */ + + asm volatile("enqcmds (%eax),%ebx"); + asm volatile("enqcmds 0x12345678(%eax),%ecx"); + asm volatile("enqcmds (%si),%bx"); + asm volatile("enqcmds 0x1234(%si),%cx"); + #endif /* #ifndef __x86_64__ */ + /* SGX */ + + asm volatile("encls"); + asm volatile("enclu"); + asm volatile("enclv"); + + /* pconfig */ + + asm volatile("pconfig"); + + /* wbnoinvd */ + + asm volatile("wbnoinvd"); + /* Following line is a marker for the awk script - do not change */ asm volatile("rdtsc"); /* Stop here */ ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map 2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter 2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter @ 2019-11-15 13:54 ` Adrian Hunter 2019-11-18 11:40 ` Masami Hiramatsu 2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter 1 sibling, 2 replies; 7+ messages in thread From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw) To: x86 Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel, Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin, Andi Kleen, Peter Zijlstra, Masami Hiramatsu Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> --- arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ 2 files changed, 24 insertions(+), 12 deletions(-) diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index e0b85930dd77..0a0e9112f284 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -333,7 +333,7 @@ AVXcode: 1 06: CLTS 07: SYSRET (o64) 08: INVD -09: WBINVD +09: WBINVD | WBNOINVD (F3) 0a: 0b: UD2 (1B) 0c: @@ -364,7 +364,7 @@ AVXcode: 1 # a ModR/M byte. 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv -1c: +1c: Grp20 (1A),(1C) 1d: 1e: 1f: NOP Ev @@ -792,6 +792,8 @@ f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) +f9: MOVDIRI My,Gy EndTable Table: 3-byte opcode 2 (0x0f 0x3a) @@ -943,9 +945,9 @@ GrpTable: Grp6 EndTable GrpTable: Grp7 -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv 5: rdpkru (110),(11B) | wrpkru (111),(11B) @@ -1020,7 +1022,7 @@ GrpTable: Grp15 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) 5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) 7: clflush | clflushopt (66) | sfence (11B) EndTable @@ -1051,6 +1053,10 @@ GrpTable: Grp19 6: vscatterpf1qps/d Wx (66),(ev) EndTable +GrpTable: Grp20 +0: cldemote Mb +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt index e0b85930dd77..0a0e9112f284 100644 --- a/tools/arch/x86/lib/x86-opcode-map.txt +++ b/tools/arch/x86/lib/x86-opcode-map.txt @@ -333,7 +333,7 @@ AVXcode: 1 06: CLTS 07: SYSRET (o64) 08: INVD -09: WBINVD +09: WBINVD | WBNOINVD (F3) 0a: 0b: UD2 (1B) 0c: @@ -364,7 +364,7 @@ AVXcode: 1 # a ModR/M byte. 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv -1c: +1c: Grp20 (1A),(1C) 1d: 1e: 1f: NOP Ev @@ -792,6 +792,8 @@ f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) +f9: MOVDIRI My,Gy EndTable Table: 3-byte opcode 2 (0x0f 0x3a) @@ -943,9 +945,9 @@ GrpTable: Grp6 EndTable GrpTable: Grp7 -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv 5: rdpkru (110),(11B) | wrpkru (111),(11B) @@ -1020,7 +1022,7 @@ GrpTable: Grp15 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) 5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) 7: clflush | clflushopt (66) | sfence (11B) EndTable @@ -1051,6 +1053,10 @@ GrpTable: Grp19 6: vscatterpf1qps/d Wx (66),(ev) EndTable +GrpTable: Grp20 +0: cldemote Mb +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map 2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter @ 2019-11-18 11:40 ` Masami Hiramatsu 2019-11-18 21:55 ` Arnaldo Carvalho de Melo 2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter 1 sibling, 1 reply; 7+ messages in thread From: Masami Hiramatsu @ 2019-11-18 11:40 UTC (permalink / raw) To: Adrian Hunter Cc: x86, Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel, Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin, Andi Kleen, Peter Zijlstra, Masami Hiramatsu Hi Adrian, On Fri, 15 Nov 2019 15:54:47 +0200 Adrian Hunter <adrian.hunter@intel.com> wrote: > Add to the opcode map the following instructions: > cldemote > tpause > umonitor > umwait > movdiri > movdir64b > enqcmd > enqcmds > encls > enclu > enclv > pconfig > wbnoinvd > > For information about the instructions, refer Intel SDM May 2019 > (325462-070US) and Intel Architecture Instruction Set Extensions > May 2019 (319433-037). > > The instruction decoding can be tested using the perf tools' > "x86 instruction decoder - new instructions" test as folllows: > > $ perf test -v "new " 2>&1 | grep -i cldemote > Decoded ok: 0f 1c 00 cldemote (%eax) > Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 > Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) > Decoded ok: 0f 1c 00 cldemote (%rax) > Decoded ok: 41 0f 1c 00 cldemote (%r8) > Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 > Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) > Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) > $ perf test -v "new " 2>&1 | grep -i tpause > Decoded ok: 66 0f ae f3 tpause %ebx > Decoded ok: 66 0f ae f3 tpause %ebx > Decoded ok: 66 41 0f ae f0 tpause %r8d > $ perf test -v "new " 2>&1 | grep -i umonitor > Decoded ok: 67 f3 0f ae f0 umonitor %ax > Decoded ok: f3 0f ae f0 umonitor %eax > Decoded ok: 67 f3 0f ae f0 umonitor %eax > Decoded ok: f3 0f ae f0 umonitor %rax > Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d > $ perf test -v "new " 2>&1 | grep -i umwait > Decoded ok: f2 0f ae f0 umwait %eax > Decoded ok: f2 0f ae f0 umwait %eax > Decoded ok: f2 41 0f ae f0 umwait %r8d > $ perf test -v "new " 2>&1 | grep -i movdiri > Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) > Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) > Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) > Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) > $ perf test -v "new " 2>&1 | grep -i movdir64b > Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx > Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx > Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx > Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx > Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx > Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx > Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx > Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx > $ perf test -v "new " 2>&1 | grep -i enqcmd > Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx > Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx > Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx > Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx > Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx > Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx > Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx > Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx > Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx > Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx > Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx > Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx > Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx > Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx > Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx > Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx > $ perf test -v "new " 2>&1 | grep -i enqcmds > Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx > Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx > Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx > Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx > Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx > Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx > Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx > Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx > $ perf test -v "new " 2>&1 | grep -i encls > Decoded ok: 0f 01 cf encls > Decoded ok: 0f 01 cf encls > $ perf test -v "new " 2>&1 | grep -i enclu > Decoded ok: 0f 01 d7 enclu > Decoded ok: 0f 01 d7 enclu > $ perf test -v "new " 2>&1 | grep -i enclv > Decoded ok: 0f 01 c0 enclv > Decoded ok: 0f 01 c0 enclv > $ perf test -v "new " 2>&1 | grep -i pconfig > Decoded ok: 0f 01 c5 pconfig > Decoded ok: 0f 01 c5 pconfig > $ perf test -v "new " 2>&1 | grep -i wbnoinvd > Decoded ok: f3 0f 09 wbnoinvd > Decoded ok: f3 0f 09 wbnoinvd > Thanks for updating it! This looks good to me. Acked-by: Masami Hiramatsu <mhiramat@kernel.org> > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > Reviewed-by: Andi Kleen <ak@linux.intel.com> > --- > arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ > tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ > 2 files changed, 24 insertions(+), 12 deletions(-) > > diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt > index e0b85930dd77..0a0e9112f284 100644 > --- a/arch/x86/lib/x86-opcode-map.txt > +++ b/arch/x86/lib/x86-opcode-map.txt > @@ -333,7 +333,7 @@ AVXcode: 1 > 06: CLTS > 07: SYSRET (o64) > 08: INVD > -09: WBINVD > +09: WBINVD | WBNOINVD (F3) > 0a: > 0b: UD2 (1B) > 0c: > @@ -364,7 +364,7 @@ AVXcode: 1 > # a ModR/M byte. > 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev > 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv > -1c: > +1c: Grp20 (1A),(1C) > 1d: > 1e: > 1f: NOP Ev > @@ -792,6 +792,8 @@ f3: Grp17 (1A) > f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) > f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) > f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) > +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) > +f9: MOVDIRI My,Gy > EndTable > > Table: 3-byte opcode 2 (0x0f 0x3a) > @@ -943,9 +945,9 @@ GrpTable: Grp6 > EndTable > > GrpTable: Grp7 > -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) > -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) > -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) > +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) > +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) > +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) > 3: LIDT Ms > 4: SMSW Mw/Rv > 5: rdpkru (110),(11B) | wrpkru (111),(11B) > @@ -1020,7 +1022,7 @@ GrpTable: Grp15 > 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) > 4: XSAVE | ptwrite Ey (F3),(11B) > 5: XRSTOR | lfence (11B) > -6: XSAVEOPT | clwb (66) | mfence (11B) > +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) > 7: clflush | clflushopt (66) | sfence (11B) > EndTable > > @@ -1051,6 +1053,10 @@ GrpTable: Grp19 > 6: vscatterpf1qps/d Wx (66),(ev) > EndTable > > +GrpTable: Grp20 > +0: cldemote Mb > +EndTable > + > # AMD's Prefetch Group > GrpTable: GrpP > 0: PREFETCH > diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt > index e0b85930dd77..0a0e9112f284 100644 > --- a/tools/arch/x86/lib/x86-opcode-map.txt > +++ b/tools/arch/x86/lib/x86-opcode-map.txt > @@ -333,7 +333,7 @@ AVXcode: 1 > 06: CLTS > 07: SYSRET (o64) > 08: INVD > -09: WBINVD > +09: WBINVD | WBNOINVD (F3) > 0a: > 0b: UD2 (1B) > 0c: > @@ -364,7 +364,7 @@ AVXcode: 1 > # a ModR/M byte. > 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev > 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv > -1c: > +1c: Grp20 (1A),(1C) > 1d: > 1e: > 1f: NOP Ev > @@ -792,6 +792,8 @@ f3: Grp17 (1A) > f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) > f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) > f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) > +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) > +f9: MOVDIRI My,Gy > EndTable > > Table: 3-byte opcode 2 (0x0f 0x3a) > @@ -943,9 +945,9 @@ GrpTable: Grp6 > EndTable > > GrpTable: Grp7 > -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) > -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) > -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) > +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) > +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) > +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) > 3: LIDT Ms > 4: SMSW Mw/Rv > 5: rdpkru (110),(11B) | wrpkru (111),(11B) > @@ -1020,7 +1022,7 @@ GrpTable: Grp15 > 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) > 4: XSAVE | ptwrite Ey (F3),(11B) > 5: XRSTOR | lfence (11B) > -6: XSAVEOPT | clwb (66) | mfence (11B) > +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) > 7: clflush | clflushopt (66) | sfence (11B) > EndTable > > @@ -1051,6 +1053,10 @@ GrpTable: Grp19 > 6: vscatterpf1qps/d Wx (66),(ev) > EndTable > > +GrpTable: Grp20 > +0: cldemote Mb > +EndTable > + > # AMD's Prefetch Group > GrpTable: GrpP > 0: PREFETCH > -- > 2.17.1 > -- Masami Hiramatsu <mhiramat@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map 2019-11-18 11:40 ` Masami Hiramatsu @ 2019-11-18 21:55 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 7+ messages in thread From: Arnaldo Carvalho de Melo @ 2019-11-18 21:55 UTC (permalink / raw) To: Masami Hiramatsu Cc: Adrian Hunter, x86, Jiri Olsa, linux-kernel, Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin, Andi Kleen, Peter Zijlstra Em Mon, Nov 18, 2019 at 08:40:45PM +0900, Masami Hiramatsu escreveu: > Hi Adrian, > > On Fri, 15 Nov 2019 15:54:47 +0200 > Adrian Hunter <adrian.hunter@intel.com> wrote: > > > Thanks for updating it! > This looks good to me. > > Acked-by: Masami Hiramatsu <mhiramat@kernel.org> > > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > > Reviewed-by: Andi Kleen <ak@linux.intel.com> Thanks, applied both patches, - Arnaldo ^ permalink raw reply [flat|nested] 7+ messages in thread
* [tip: perf/core] x86/insn: Add some Intel instructions to the opcode map 2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter 2019-11-18 11:40 ` Masami Hiramatsu @ 2019-11-19 16:56 ` tip-bot2 for Adrian Hunter 1 sibling, 0 replies; 7+ messages in thread From: tip-bot2 for Adrian Hunter @ 2019-11-19 16:56 UTC (permalink / raw) To: linux-tip-commits Cc: Adrian Hunter, Andi Kleen, Masami Hiramatsu, Borislav Petkov, H. Peter Anvin, Jiri Olsa, Peter Zijlstra, Thomas Gleixner, x86, Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel The following commit has been merged into the perf/core branch of tip: Commit-ID: b980be189c9badba50634671e2303e92bf28e35a Gitweb: https://git.kernel.org/tip/b980be189c9badba50634671e2303e92bf28e35a Author: Adrian Hunter <adrian.hunter@intel.com> AuthorDate: Fri, 15 Nov 2019 15:54:47 +02:00 Committer: Arnaldo Carvalho de Melo <acme@redhat.com> CommitterDate: Mon, 18 Nov 2019 18:54:45 -03:00 x86/insn: Add some Intel instructions to the opcode map Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> --- arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------ 2 files changed, 24 insertions(+), 12 deletions(-) diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index e0b8593..0a0e911 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -333,7 +333,7 @@ AVXcode: 1 06: CLTS 07: SYSRET (o64) 08: INVD -09: WBINVD +09: WBINVD | WBNOINVD (F3) 0a: 0b: UD2 (1B) 0c: @@ -364,7 +364,7 @@ AVXcode: 1 # a ModR/M byte. 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv -1c: +1c: Grp20 (1A),(1C) 1d: 1e: 1f: NOP Ev @@ -792,6 +792,8 @@ f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) +f9: MOVDIRI My,Gy EndTable Table: 3-byte opcode 2 (0x0f 0x3a) @@ -943,9 +945,9 @@ GrpTable: Grp6 EndTable GrpTable: Grp7 -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv 5: rdpkru (110),(11B) | wrpkru (111),(11B) @@ -1020,7 +1022,7 @@ GrpTable: Grp15 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) 5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) 7: clflush | clflushopt (66) | sfence (11B) EndTable @@ -1051,6 +1053,10 @@ GrpTable: Grp19 6: vscatterpf1qps/d Wx (66),(ev) EndTable +GrpTable: Grp20 +0: cldemote Mb +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt index e0b8593..0a0e911 100644 --- a/tools/arch/x86/lib/x86-opcode-map.txt +++ b/tools/arch/x86/lib/x86-opcode-map.txt @@ -333,7 +333,7 @@ AVXcode: 1 06: CLTS 07: SYSRET (o64) 08: INVD -09: WBINVD +09: WBINVD | WBNOINVD (F3) 0a: 0b: UD2 (1B) 0c: @@ -364,7 +364,7 @@ AVXcode: 1 # a ModR/M byte. 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv -1c: +1c: Grp20 (1A),(1C) 1d: 1e: 1f: NOP Ev @@ -792,6 +792,8 @@ f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) +f9: MOVDIRI My,Gy EndTable Table: 3-byte opcode 2 (0x0f 0x3a) @@ -943,9 +945,9 @@ GrpTable: Grp6 EndTable GrpTable: Grp7 -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B) +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B) +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv 5: rdpkru (110),(11B) | wrpkru (111),(11B) @@ -1020,7 +1022,7 @@ GrpTable: Grp15 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) 5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) 7: clflush | clflushopt (66) | sfence (11B) EndTable @@ -1051,6 +1053,10 @@ GrpTable: Grp19 6: vscatterpf1qps/d Wx (66),(ev) EndTable +GrpTable: Grp20 +0: cldemote Mb +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-11-19 16:57 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter 2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter 2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter 2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter 2019-11-18 11:40 ` Masami Hiramatsu 2019-11-18 21:55 ` Arnaldo Carvalho de Melo 2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.