From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: srinivas.kandagatla@linaro.org, robh+dt@kernel.org,
tsoni@codeaurora.org, agross@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
rnayak@codeaurora.org
Subject: Re: [PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
Date: Mon, 18 Nov 2019 21:49:00 -0800 [thread overview]
Message-ID: <20191119054900.GD18024@yoga> (raw)
In-Reply-To: <0101016e7ee9c786-fcf80f4e-9b57-4d6b-8806-9ca408e21b55-000000@us-west-2.amazonses.com>
On Mon 18 Nov 06:28 PST 2019, Sibi Sankar wrote:
> Add optional "qcom,protection-domain" bindings for APR services. This
> helps to capture the dependencies between APR services and the PD on
> which each apr service run.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f87c0b2a48de4 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,12 @@ by the individual bindings for the specific service
> 12 - Ultrasound stream manager.
> 13 - Listen stream manager.
>
> +- qcom,protection-domain
> + Usage: optional
> + Value type: <stringlist>
> + Definition: Must list the protection domain service name and path
> + that the particular apr service has a dependency on.
> +
> = EXAMPLE
> The following example represents a QDSP based sound card on a MSM8996 device
> which uses apr as communication between Apps and QDSP.
> @@ -82,3 +88,56 @@ which uses apr as communication between Apps and QDSP.
> ...
> };
> };
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card on SDM845 device.
> +Here the apr services are dependent on "avs/audio" service running on AUDIO
> +Protection Domain hosted on ADSP remote processor.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + };
> +
> + q6afe: q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6afedai: dais {
> + compatible = "qcom,q6afe-dais";
> + #sound-dai-cells = <1>;
> +
> + qi2s@22 {
> + reg = <22>;
> + qcom,sd-lines = <3>;
> + };
> + };
> + };
> +
> + q6asm: q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6asmdai: dais {
> + compatible = "qcom,q6asm-dais";
> + #sound-dai-cells = <1>;
> + iommus = <&apps_smmu 0x1821 0x0>;
> + };
> + };
> +
> + q6adm: q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6routing: routing {
> + compatible = "qcom,q6adm-routing";
> + #sound-dai-cells = <0>;
> + };
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: srinivas.kandagatla@linaro.org, robh+dt@kernel.org,
tsoni@codeaurora.org, agross@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
rnayak@codeaurora.org
Subject: Re: [PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
Date: Mon, 18 Nov 2019 21:49:04 -0800 [thread overview]
Message-ID: <20191119054900.GD18024@yoga> (raw)
In-Reply-To: <0101016e7ee9c786-fcf80f4e-9b57-4d6b-8806-9ca408e21b55-000000@us-west-2.amazonses.com>
On Mon 18 Nov 06:28 PST 2019, Sibi Sankar wrote:
> Add optional "qcom,protection-domain" bindings for APR services. This
> helps to capture the dependencies between APR services and the PD on
> which each apr service run.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f87c0b2a48de4 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,12 @@ by the individual bindings for the specific service
> 12 - Ultrasound stream manager.
> 13 - Listen stream manager.
>
> +- qcom,protection-domain
> + Usage: optional
> + Value type: <stringlist>
> + Definition: Must list the protection domain service name and path
> + that the particular apr service has a dependency on.
> +
> = EXAMPLE
> The following example represents a QDSP based sound card on a MSM8996 device
> which uses apr as communication between Apps and QDSP.
> @@ -82,3 +88,56 @@ which uses apr as communication between Apps and QDSP.
> ...
> };
> };
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card on SDM845 device.
> +Here the apr services are dependent on "avs/audio" service running on AUDIO
> +Protection Domain hosted on ADSP remote processor.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + };
> +
> + q6afe: q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6afedai: dais {
> + compatible = "qcom,q6afe-dais";
> + #sound-dai-cells = <1>;
> +
> + qi2s@22 {
> + reg = <22>;
> + qcom,sd-lines = <3>;
> + };
> + };
> + };
> +
> + q6asm: q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6asmdai: dais {
> + compatible = "qcom,q6asm-dais";
> + #sound-dai-cells = <1>;
> + iommus = <&apps_smmu 0x1821 0x0>;
> + };
> + };
> +
> + q6adm: q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6routing: routing {
> + compatible = "qcom,q6adm-routing";
> + #sound-dai-cells = <0>;
> + };
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
next prev parent reply other threads:[~2019-11-19 5:58 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191118142728.30187-1-sibis@codeaurora.org>
2019-11-18 14:27 ` [PATCH 1/3] soc: qcom: Introduce Protection Domain Restart helpers Sibi Sankar
2019-11-18 14:27 ` Sibi Sankar
2019-11-19 6:40 ` Bjorn Andersson
2019-11-19 6:40 ` Bjorn Andersson
2019-11-19 10:18 ` sibis
2019-11-19 23:17 ` Bjorn Andersson
2019-11-19 23:17 ` Bjorn Andersson
2019-11-20 12:12 ` Sibi Sankar
2019-11-20 12:12 ` Sibi Sankar
2019-11-19 10:18 ` sibis
2019-11-18 14:28 ` [PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings Sibi Sankar
2019-11-18 14:28 ` Sibi Sankar
2019-11-19 5:49 ` Bjorn Andersson [this message]
2019-11-19 5:49 ` Bjorn Andersson
2019-11-21 16:04 ` Srinivas Kandagatla
2019-11-18 14:28 ` [PATCH 3/3] soc: qcom: apr: Add avs/audio tracking functionality Sibi Sankar
2019-11-18 14:28 ` Sibi Sankar
2019-11-19 6:53 ` Bjorn Andersson
2019-11-19 6:53 ` Bjorn Andersson
2019-11-19 10:25 ` sibis
2019-11-19 10:25 ` sibis
[not found] ` <0101016e7ee9c591-d04928e8-6440-488c-a956-3b5c9b8988bf-000000@us-west-2.amazonses.com>
2019-12-03 21:52 ` [PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings Rob Herring
2019-12-16 17:46 ` Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191119054900.GD18024@yoga \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sibis@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.