generic DMA bypass flag

generic DMA bypass flag

[Christoph Hellwig]

Hi all,

I've recently beeing chatting with Lu about using dma-iommu and
per-device DMA ops in the intel IOMMU driver, and one missing feature
in dma-iommu is a bypass mode where the direct mapping is used even
when an iommu is attached to improve performance.  The powerpc
code already has a similar mode, so I'd like to move it to the core
DMA mapping code.  As part of that I noticed that the current
powerpc code has a little bug in that it used the wrong check in the
dma_sync_* routines to see if the direct mapping code is used.

These two patches just add the generic code and move powerpc over,
the intel IOMMU bits will require a separate discussion.

The x86 AMD Gart code also has a bypass mode, but it is a lot
strange, so I'm not going to touch it for now.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

generic DMA bypass flag

[Christoph Hellwig]

Hi all,

I've recently beeing chatting with Lu about using dma-iommu and
per-device DMA ops in the intel IOMMU driver, and one missing feature
in dma-iommu is a bypass mode where the direct mapping is used even
when an iommu is attached to improve performance.  The powerpc
code already has a similar mode, so I'd like to move it to the core
DMA mapping code.  As part of that I noticed that the current
powerpc code has a little bug in that it used the wrong check in the
dma_sync_* routines to see if the direct mapping code is used.

These two patches just add the generic code and move powerpc over,
the intel IOMMU bits will require a separate discussion.

The x86 AMD Gart code also has a bypass mode, but it is a lot
strange, so I'm not going to touch it for now.

generic DMA bypass flag

[Christoph Hellwig]

Hi all,

I've recently beeing chatting with Lu about using dma-iommu and
per-device DMA ops in the intel IOMMU driver, and one missing feature
in dma-iommu is a bypass mode where the direct mapping is used even
when an iommu is attached to improve performance.  The powerpc
code already has a similar mode, so I'd like to move it to the core
DMA mapping code.  As part of that I noticed that the current
powerpc code has a little bug in that it used the wrong check in the
dma_sync_* routines to see if the direct mapping code is used.

These two patches just add the generic code and move powerpc over,
the intel IOMMU bits will require a separate discussion.

The x86 AMD Gart code also has a bypass mode, but it is a lot
strange, so I'm not going to touch it for now.

[PATCH 1/2] dma-mapping: add a dma_ops_bypass flag to struct device

[Christoph Hellwig]

Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough.  Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 include/linux/device.h      |  4 ++++
 include/linux/dma-mapping.h | 30 ++++++++++++++++++------------
 kernel/dma/mapping.c        | 35 ++++++++++++++++++++++++++---------
 3 files changed, 48 insertions(+), 21 deletions(-)

diff --git a/include/linux/device.h b/include/linux/device.h
index 297239a08bb7..b8a3b4ec46bd 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1217,6 +1217,9 @@ struct dev_links_info {
  *              device.
  * @dma_coherent: this particular device is dma coherent, even if the
  *		architecture supports non-coherent devices.
+ * @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
+ *		streaming DMA operations (->map_* / ->unmap_* / ->sync_*).
+ *		This flag is managed by the dma_ops from ->dma_supported.
  *
  * At the lowest level, every device in a Linux system is represented by an
  * instance of struct device. The device structure contains the information
@@ -1316,6 +1319,7 @@ struct device {
     defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 	bool			dma_coherent:1;
 #endif
+	bool			dma_ops_bypass : 1;
 };
 
 static inline struct device *kobj_to_dev(struct kobject *kobj)
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 4d450672b7d6..22fe74179e02 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -191,9 +191,15 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
 }
 #endif /* CONFIG_DMA_DECLARE_COHERENT */
 
-static inline bool dma_is_direct(const struct dma_map_ops *ops)
+/*
+ * Check if the devices uses a direct mapping for streaming DMA operations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_map_direct(struct device *dev,
+		const struct dma_map_ops *ops)
 {
-	return likely(!ops);
+	return likely(!ops) || dev->dma_ops_bypass;
 }
 
 /*
@@ -282,7 +288,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 	dma_addr_t addr;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_page(dev, page, offset, size, dir, attrs);
 	else
 		addr = ops->map_page(dev, page, offset, size, dir, attrs);
@@ -297,7 +303,7 @@ static inline void dma_unmap_page_attrs(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_page(dev, addr, size, dir, attrs);
 	else if (ops->unmap_page)
 		ops->unmap_page(dev, addr, size, dir, attrs);
@@ -316,7 +322,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
 	int ents;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		ents = dma_direct_map_sg(dev, sg, nents, dir, attrs);
 	else
 		ents = ops->map_sg(dev, sg, nents, dir, attrs);
@@ -334,7 +340,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg
 
 	BUG_ON(!valid_dma_direction(dir));
 	debug_dma_unmap_sg(dev, sg, nents, dir);
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_sg(dev, sg, nents, dir, attrs);
 	else if (ops->unmap_sg)
 		ops->unmap_sg(dev, sg, nents, dir, attrs);
@@ -355,7 +361,7 @@ static inline dma_addr_t dma_map_resource(struct device *dev,
 	if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
 		return DMA_MAPPING_ERROR;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_resource(dev, phys_addr, size, dir, attrs);
 	else if (ops->map_resource)
 		addr = ops->map_resource(dev, phys_addr, size, dir, attrs);
@@ -371,7 +377,7 @@ static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (!dma_is_direct(ops) && ops->unmap_resource)
+	if (!dma_map_direct(dev, ops) && ops->unmap_resource)
 		ops->unmap_resource(dev, addr, size, dir, attrs);
 	debug_dma_unmap_resource(dev, addr, size, dir);
 }
@@ -383,7 +389,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
 	else if (ops->sync_single_for_cpu)
 		ops->sync_single_for_cpu(dev, addr, size, dir);
@@ -397,7 +403,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_device(dev, addr, size, dir);
 	else if (ops->sync_single_for_device)
 		ops->sync_single_for_device(dev, addr, size, dir);
@@ -411,7 +417,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_cpu(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_cpu)
 		ops->sync_sg_for_cpu(dev, sg, nelems, dir);
@@ -425,7 +431,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_device(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_device)
 		ops->sync_sg_for_device(dev, sg, nelems, dir);
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 12ff766ec1fa..fdb6e16c1b00 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -105,6 +105,19 @@ void *dmam_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 }
 EXPORT_SYMBOL(dmam_alloc_attrs);
 
+/*
+ * Check if the devices uses a direct mapping for DMA allocations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_alloc_direct(struct device *dev,
+		const struct dma_map_ops *ops)
+{
+	return likely(!ops) ||
+		(dev->dma_ops_bypass &&
+		 dma_direct_supported(dev, dev->coherent_dma_mask));
+}
+
 /*
  * Create scatter-list for the already allocated DMA buffer.
  */
@@ -138,7 +151,7 @@ int dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_get_sgtable(dev, sgt, cpu_addr, dma_addr,
 				size, attrs);
 	if (!ops->get_sgtable)
@@ -206,7 +219,7 @@ bool dma_can_mmap(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_can_mmap(dev);
 	return ops->mmap != NULL;
 }
@@ -231,7 +244,7 @@ int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_mmap(dev, vma, cpu_addr, dma_addr, size,
 				attrs);
 	if (!ops->mmap)
@@ -244,7 +257,7 @@ u64 dma_get_required_mask(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		return dma_direct_get_required_mask(dev);
 	if (ops->get_required_mask)
 		return ops->get_required_mask(dev);
@@ -275,7 +288,7 @@ void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* let the implementation decide on the zone to allocate from: */
 	flag &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		cpu_addr = dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	else if (ops->alloc)
 		cpu_addr = ops->alloc(dev, size, dma_handle, flag, attrs);
@@ -307,7 +320,7 @@ void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 
 	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		dma_direct_free(dev, size, cpu_addr, dma_handle, attrs);
 	else if (ops->free)
 		ops->free(dev, size, cpu_addr, dma_handle, attrs);
@@ -318,7 +331,11 @@ int dma_supported(struct device *dev, u64 mask)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	/*
+	 * Only call the dma-direct version if we really do not have any ops
+	 * set, as the dma_supported op will set the dma_ops_bypass flag.
+	 */
+	if (!ops)
 		return dma_direct_supported(dev, mask);
 	if (!ops->dma_supported)
 		return 1;
@@ -374,7 +391,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 
 	BUG_ON(!valid_dma_direction(dir));
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		arch_dma_cache_sync(dev, vaddr, size, dir);
 	else if (ops->cache_sync)
 		ops->cache_sync(dev, vaddr, size, dir);
@@ -386,7 +403,7 @@ size_t dma_max_mapping_size(struct device *dev)
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 	size_t size = SIZE_MAX;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		size = dma_direct_max_mapping_size(dev);
 	else if (ops && ops->max_mapping_size)
 		size = ops->max_mapping_size(dev);
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH 1/2] dma-mapping: add a dma_ops_bypass flag to struct device

[Christoph Hellwig]

Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough.  Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 include/linux/device.h      |  4 ++++
 include/linux/dma-mapping.h | 30 ++++++++++++++++++------------
 kernel/dma/mapping.c        | 35 ++++++++++++++++++++++++++---------
 3 files changed, 48 insertions(+), 21 deletions(-)

diff --git a/include/linux/device.h b/include/linux/device.h
index 297239a08bb7..b8a3b4ec46bd 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1217,6 +1217,9 @@ struct dev_links_info {
  *              device.
  * @dma_coherent: this particular device is dma coherent, even if the
  *		architecture supports non-coherent devices.
+ * @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
+ *		streaming DMA operations (->map_* / ->unmap_* / ->sync_*).
+ *		This flag is managed by the dma_ops from ->dma_supported.
  *
  * At the lowest level, every device in a Linux system is represented by an
  * instance of struct device. The device structure contains the information
@@ -1316,6 +1319,7 @@ struct device {
     defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 	bool			dma_coherent:1;
 #endif
+	bool			dma_ops_bypass : 1;
 };
 
 static inline struct device *kobj_to_dev(struct kobject *kobj)
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 4d450672b7d6..22fe74179e02 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -191,9 +191,15 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
 }
 #endif /* CONFIG_DMA_DECLARE_COHERENT */
 
-static inline bool dma_is_direct(const struct dma_map_ops *ops)
+/*
+ * Check if the devices uses a direct mapping for streaming DMA operations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_map_direct(struct device *dev,
+		const struct dma_map_ops *ops)
 {
-	return likely(!ops);
+	return likely(!ops) || dev->dma_ops_bypass;
 }
 
 /*
@@ -282,7 +288,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 	dma_addr_t addr;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_page(dev, page, offset, size, dir, attrs);
 	else
 		addr = ops->map_page(dev, page, offset, size, dir, attrs);
@@ -297,7 +303,7 @@ static inline void dma_unmap_page_attrs(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_page(dev, addr, size, dir, attrs);
 	else if (ops->unmap_page)
 		ops->unmap_page(dev, addr, size, dir, attrs);
@@ -316,7 +322,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
 	int ents;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		ents = dma_direct_map_sg(dev, sg, nents, dir, attrs);
 	else
 		ents = ops->map_sg(dev, sg, nents, dir, attrs);
@@ -334,7 +340,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg
 
 	BUG_ON(!valid_dma_direction(dir));
 	debug_dma_unmap_sg(dev, sg, nents, dir);
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_sg(dev, sg, nents, dir, attrs);
 	else if (ops->unmap_sg)
 		ops->unmap_sg(dev, sg, nents, dir, attrs);
@@ -355,7 +361,7 @@ static inline dma_addr_t dma_map_resource(struct device *dev,
 	if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
 		return DMA_MAPPING_ERROR;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_resource(dev, phys_addr, size, dir, attrs);
 	else if (ops->map_resource)
 		addr = ops->map_resource(dev, phys_addr, size, dir, attrs);
@@ -371,7 +377,7 @@ static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (!dma_is_direct(ops) && ops->unmap_resource)
+	if (!dma_map_direct(dev, ops) && ops->unmap_resource)
 		ops->unmap_resource(dev, addr, size, dir, attrs);
 	debug_dma_unmap_resource(dev, addr, size, dir);
 }
@@ -383,7 +389,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
 	else if (ops->sync_single_for_cpu)
 		ops->sync_single_for_cpu(dev, addr, size, dir);
@@ -397,7 +403,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_device(dev, addr, size, dir);
 	else if (ops->sync_single_for_device)
 		ops->sync_single_for_device(dev, addr, size, dir);
@@ -411,7 +417,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_cpu(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_cpu)
 		ops->sync_sg_for_cpu(dev, sg, nelems, dir);
@@ -425,7 +431,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_device(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_device)
 		ops->sync_sg_for_device(dev, sg, nelems, dir);
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 12ff766ec1fa..fdb6e16c1b00 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -105,6 +105,19 @@ void *dmam_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 }
 EXPORT_SYMBOL(dmam_alloc_attrs);
 
+/*
+ * Check if the devices uses a direct mapping for DMA allocations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_alloc_direct(struct device *dev,
+		const struct dma_map_ops *ops)
+{
+	return likely(!ops) ||
+		(dev->dma_ops_bypass &&
+		 dma_direct_supported(dev, dev->coherent_dma_mask));
+}
+
 /*
  * Create scatter-list for the already allocated DMA buffer.
  */
@@ -138,7 +151,7 @@ int dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_get_sgtable(dev, sgt, cpu_addr, dma_addr,
 				size, attrs);
 	if (!ops->get_sgtable)
@@ -206,7 +219,7 @@ bool dma_can_mmap(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_can_mmap(dev);
 	return ops->mmap != NULL;
 }
@@ -231,7 +244,7 @@ int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_mmap(dev, vma, cpu_addr, dma_addr, size,
 				attrs);
 	if (!ops->mmap)
@@ -244,7 +257,7 @@ u64 dma_get_required_mask(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		return dma_direct_get_required_mask(dev);
 	if (ops->get_required_mask)
 		return ops->get_required_mask(dev);
@@ -275,7 +288,7 @@ void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* let the implementation decide on the zone to allocate from: */
 	flag &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		cpu_addr = dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	else if (ops->alloc)
 		cpu_addr = ops->alloc(dev, size, dma_handle, flag, attrs);
@@ -307,7 +320,7 @@ void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 
 	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		dma_direct_free(dev, size, cpu_addr, dma_handle, attrs);
 	else if (ops->free)
 		ops->free(dev, size, cpu_addr, dma_handle, attrs);
@@ -318,7 +331,11 @@ int dma_supported(struct device *dev, u64 mask)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	/*
+	 * Only call the dma-direct version if we really do not have any ops
+	 * set, as the dma_supported op will set the dma_ops_bypass flag.
+	 */
+	if (!ops)
 		return dma_direct_supported(dev, mask);
 	if (!ops->dma_supported)
 		return 1;
@@ -374,7 +391,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 
 	BUG_ON(!valid_dma_direction(dir));
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		arch_dma_cache_sync(dev, vaddr, size, dir);
 	else if (ops->cache_sync)
 		ops->cache_sync(dev, vaddr, size, dir);
@@ -386,7 +403,7 @@ size_t dma_max_mapping_size(struct device *dev)
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 	size_t size = SIZE_MAX;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		size = dma_direct_max_mapping_size(dev);
 	else if (ops && ops->max_mapping_size)
 		size = ops->max_mapping_size(dev);
-- 
2.20.1

[PATCH 1/2] dma-mapping: add a dma_ops_bypass flag to struct device

[Christoph Hellwig]

Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough.  Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 include/linux/device.h      |  4 ++++
 include/linux/dma-mapping.h | 30 ++++++++++++++++++------------
 kernel/dma/mapping.c        | 35 ++++++++++++++++++++++++++---------
 3 files changed, 48 insertions(+), 21 deletions(-)

diff --git a/include/linux/device.h b/include/linux/device.h
index 297239a08bb7..b8a3b4ec46bd 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1217,6 +1217,9 @@ struct dev_links_info {
  *              device.
  * @dma_coherent: this particular device is dma coherent, even if the
  *		architecture supports non-coherent devices.
+ * @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
+ *		streaming DMA operations (->map_* / ->unmap_* / ->sync_*).
+ *		This flag is managed by the dma_ops from ->dma_supported.
  *
  * At the lowest level, every device in a Linux system is represented by an
  * instance of struct device. The device structure contains the information
@@ -1316,6 +1319,7 @@ struct device {
     defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 	bool			dma_coherent:1;
 #endif
+	bool			dma_ops_bypass : 1;
 };
 
 static inline struct device *kobj_to_dev(struct kobject *kobj)
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 4d450672b7d6..22fe74179e02 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -191,9 +191,15 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
 }
 #endif /* CONFIG_DMA_DECLARE_COHERENT */
 
-static inline bool dma_is_direct(const struct dma_map_ops *ops)
+/*
+ * Check if the devices uses a direct mapping for streaming DMA operations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_map_direct(struct device *dev,
+		const struct dma_map_ops *ops)
 {
-	return likely(!ops);
+	return likely(!ops) || dev->dma_ops_bypass;
 }
 
 /*
@@ -282,7 +288,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 	dma_addr_t addr;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_page(dev, page, offset, size, dir, attrs);
 	else
 		addr = ops->map_page(dev, page, offset, size, dir, attrs);
@@ -297,7 +303,7 @@ static inline void dma_unmap_page_attrs(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_page(dev, addr, size, dir, attrs);
 	else if (ops->unmap_page)
 		ops->unmap_page(dev, addr, size, dir, attrs);
@@ -316,7 +322,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
 	int ents;
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		ents = dma_direct_map_sg(dev, sg, nents, dir, attrs);
 	else
 		ents = ops->map_sg(dev, sg, nents, dir, attrs);
@@ -334,7 +340,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg
 
 	BUG_ON(!valid_dma_direction(dir));
 	debug_dma_unmap_sg(dev, sg, nents, dir);
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_unmap_sg(dev, sg, nents, dir, attrs);
 	else if (ops->unmap_sg)
 		ops->unmap_sg(dev, sg, nents, dir, attrs);
@@ -355,7 +361,7 @@ static inline dma_addr_t dma_map_resource(struct device *dev,
 	if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
 		return DMA_MAPPING_ERROR;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		addr = dma_direct_map_resource(dev, phys_addr, size, dir, attrs);
 	else if (ops->map_resource)
 		addr = ops->map_resource(dev, phys_addr, size, dir, attrs);
@@ -371,7 +377,7 @@ static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (!dma_is_direct(ops) && ops->unmap_resource)
+	if (!dma_map_direct(dev, ops) && ops->unmap_resource)
 		ops->unmap_resource(dev, addr, size, dir, attrs);
 	debug_dma_unmap_resource(dev, addr, size, dir);
 }
@@ -383,7 +389,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
 	else if (ops->sync_single_for_cpu)
 		ops->sync_single_for_cpu(dev, addr, size, dir);
@@ -397,7 +403,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_single_for_device(dev, addr, size, dir);
 	else if (ops->sync_single_for_device)
 		ops->sync_single_for_device(dev, addr, size, dir);
@@ -411,7 +417,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_cpu(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_cpu)
 		ops->sync_sg_for_cpu(dev, sg, nelems, dir);
@@ -425,7 +431,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		dma_direct_sync_sg_for_device(dev, sg, nelems, dir);
 	else if (ops->sync_sg_for_device)
 		ops->sync_sg_for_device(dev, sg, nelems, dir);
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 12ff766ec1fa..fdb6e16c1b00 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -105,6 +105,19 @@ void *dmam_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 }
 EXPORT_SYMBOL(dmam_alloc_attrs);
 
+/*
+ * Check if the devices uses a direct mapping for DMA allocations.
+ * This allows IOMMU drivers to set a bypass mode if the DMA mask is large
+ * enough.
+ */
+static inline bool dma_alloc_direct(struct device *dev,
+		const struct dma_map_ops *ops)
+{
+	return likely(!ops) ||
+		(dev->dma_ops_bypass &&
+		 dma_direct_supported(dev, dev->coherent_dma_mask));
+}
+
 /*
  * Create scatter-list for the already allocated DMA buffer.
  */
@@ -138,7 +151,7 @@ int dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_get_sgtable(dev, sgt, cpu_addr, dma_addr,
 				size, attrs);
 	if (!ops->get_sgtable)
@@ -206,7 +219,7 @@ bool dma_can_mmap(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_can_mmap(dev);
 	return ops->mmap != NULL;
 }
@@ -231,7 +244,7 @@ int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		return dma_direct_mmap(dev, vma, cpu_addr, dma_addr, size,
 				attrs);
 	if (!ops->mmap)
@@ -244,7 +257,7 @@ u64 dma_get_required_mask(struct device *dev)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		return dma_direct_get_required_mask(dev);
 	if (ops->get_required_mask)
 		return ops->get_required_mask(dev);
@@ -275,7 +288,7 @@ void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* let the implementation decide on the zone to allocate from: */
 	flag &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		cpu_addr = dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	else if (ops->alloc)
 		cpu_addr = ops->alloc(dev, size, dma_handle, flag, attrs);
@@ -307,7 +320,7 @@ void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 
 	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		dma_direct_free(dev, size, cpu_addr, dma_handle, attrs);
 	else if (ops->free)
 		ops->free(dev, size, cpu_addr, dma_handle, attrs);
@@ -318,7 +331,11 @@ int dma_supported(struct device *dev, u64 mask)
 {
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 
-	if (dma_is_direct(ops))
+	/*
+	 * Only call the dma-direct version if we really do not have any ops
+	 * set, as the dma_supported op will set the dma_ops_bypass flag.
+	 */
+	if (!ops)
 		return dma_direct_supported(dev, mask);
 	if (!ops->dma_supported)
 		return 1;
@@ -374,7 +391,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 
 	BUG_ON(!valid_dma_direction(dir));
 
-	if (dma_is_direct(ops))
+	if (dma_alloc_direct(dev, ops))
 		arch_dma_cache_sync(dev, vaddr, size, dir);
 	else if (ops->cache_sync)
 		ops->cache_sync(dev, vaddr, size, dir);
@@ -386,7 +403,7 @@ size_t dma_max_mapping_size(struct device *dev)
 	const struct dma_map_ops *ops = get_dma_ops(dev);
 	size_t size = SIZE_MAX;
 
-	if (dma_is_direct(ops))
+	if (dma_map_direct(dev, ops))
 		size = dma_direct_max_mapping_size(dev);
 	else if (ops && ops->max_mapping_size)
 		size = ops->max_mapping_size(dev);
-- 
2.20.1

[PATCH 2/2] powerpc: use the generic dma_ops_bypass mode

[Christoph Hellwig]

Use the DMA API bypass mechanism for direct window mappings.  This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all.  It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.

Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.

Fixes: efd176a04bef ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h |  5 --
 arch/powerpc/kernel/dma-iommu.c   | 90 ++++---------------------------
 2 files changed, 9 insertions(+), 86 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 266542769e4b..452402215e12 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -18,11 +18,6 @@ struct iommu_table;
  * drivers/macintosh/macio_asic.c
  */
 struct dev_archdata {
-	/*
-	 * Set to %true if the dma_iommu_ops are requested to use a direct
-	 * window instead of dynamically mapping memory.
-	 */
-	bool			iommu_bypass : 1;
 	/*
 	 * These two used to be a union. However, with the hybrid ops we need
 	 * both so here we store both a DMA offset for direct mappings and
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e486d1d78de2..569fecd7b5b2 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -14,23 +14,6 @@
  * Generic iommu implementation
  */
 
-/*
- * The coherent mask may be smaller than the real mask, check if we can
- * really use a direct window.
- */
-static inline bool dma_iommu_alloc_bypass(struct device *dev)
-{
-	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
-		dma_direct_supported(dev, dev->coherent_dma_mask);
-}
-
-static inline bool dma_iommu_map_bypass(struct device *dev,
-		unsigned long attrs)
-{
-	return dev->archdata.iommu_bypass &&
-		(!iommu_fixed_is_weak || (attrs & DMA_ATTR_WEAK_ORDERING));
-}
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -39,8 +22,6 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag,
 				      unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		return dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -50,11 +31,7 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle,
 				    unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_free(dev, size, vaddr, dma_handle, attrs);
-	else
-		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
-				dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -67,9 +44,6 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_page(dev, page, offset, size, direction,
-				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, dma_get_mask(dev), direction, attrs);
 }
@@ -79,11 +53,8 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size,
-				direction,  attrs);
-	else
-		dma_direct_unmap_page(dev, dma_handle, size, direction, attrs);
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
+			 attrs);
 }
 
 
@@ -91,8 +62,6 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				dma_get_mask(dev), direction, attrs);
 }
@@ -101,11 +70,8 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+	ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
 			   direction, attrs);
-	else
-		dma_direct_unmap_sg(dev, sglist, nelems, direction, attrs);
 }
 
 static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
@@ -113,8 +79,9 @@ static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct pci_controller *phb = pci_bus_to_host(pdev->bus);
 
-	return phb->controller_ops.iommu_bypass_supported &&
-		phb->controller_ops.iommu_bypass_supported(pdev, mask);
+	if (iommu_fixed_is_weak || !phb->controller_ops.iommu_bypass_supported)
+		return false;
+	return phb->controller_ops.iommu_bypass_supported(pdev, mask);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -123,7 +90,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) {
-		dev->archdata.iommu_bypass = true;
+		dev->dma_ops_bypass = true;
 		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
 		return 1;
 	}
@@ -141,7 +108,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	}
 
 	dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-	dev->archdata.iommu_bypass = false;
+	dev->dma_ops_bypass = false;
 	return 1;
 }
 
@@ -153,47 +120,12 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 	if (!tbl)
 		return 0;
 
-	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_direct_get_required_mask(dev);
-
-		if (dma_iommu_bypass_supported(dev, bypass_mask))
-			return bypass_mask;
-	}
-
 	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
 	mask += mask - 1;
 
 	return mask;
 }
 
-static void dma_iommu_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t size, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
-}
-
-static void dma_iommu_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_device(dev, addr, sz, dir);
-}
-
-extern void dma_iommu_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_cpu(dev, sgl, nents, dir);
-}
-
-extern void dma_iommu_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_device(dev, sgl, nents, dir);
-}
-
 const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
@@ -203,10 +135,6 @@ const struct dma_map_ops dma_iommu_ops = {
 	.map_page		= dma_iommu_map_page,
 	.unmap_page		= dma_iommu_unmap_page,
 	.get_required_mask	= dma_iommu_get_required_mask,
-	.sync_single_for_cpu	= dma_iommu_sync_for_cpu,
-	.sync_single_for_device	= dma_iommu_sync_for_device,
-	.sync_sg_for_cpu	= dma_iommu_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma_iommu_sync_sg_for_device,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
 };
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH 2/2] powerpc: use the generic dma_ops_bypass mode

[Christoph Hellwig]

Use the DMA API bypass mechanism for direct window mappings.  This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all.  It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.

Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.

Fixes: efd176a04bef ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h |  5 --
 arch/powerpc/kernel/dma-iommu.c   | 90 ++++---------------------------
 2 files changed, 9 insertions(+), 86 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 266542769e4b..452402215e12 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -18,11 +18,6 @@ struct iommu_table;
  * drivers/macintosh/macio_asic.c
  */
 struct dev_archdata {
-	/*
-	 * Set to %true if the dma_iommu_ops are requested to use a direct
-	 * window instead of dynamically mapping memory.
-	 */
-	bool			iommu_bypass : 1;
 	/*
 	 * These two used to be a union. However, with the hybrid ops we need
 	 * both so here we store both a DMA offset for direct mappings and
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e486d1d78de2..569fecd7b5b2 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -14,23 +14,6 @@
  * Generic iommu implementation
  */
 
-/*
- * The coherent mask may be smaller than the real mask, check if we can
- * really use a direct window.
- */
-static inline bool dma_iommu_alloc_bypass(struct device *dev)
-{
-	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
-		dma_direct_supported(dev, dev->coherent_dma_mask);
-}
-
-static inline bool dma_iommu_map_bypass(struct device *dev,
-		unsigned long attrs)
-{
-	return dev->archdata.iommu_bypass &&
-		(!iommu_fixed_is_weak || (attrs & DMA_ATTR_WEAK_ORDERING));
-}
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -39,8 +22,6 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag,
 				      unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		return dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -50,11 +31,7 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle,
 				    unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_free(dev, size, vaddr, dma_handle, attrs);
-	else
-		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
-				dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -67,9 +44,6 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_page(dev, page, offset, size, direction,
-				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, dma_get_mask(dev), direction, attrs);
 }
@@ -79,11 +53,8 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size,
-				direction,  attrs);
-	else
-		dma_direct_unmap_page(dev, dma_handle, size, direction, attrs);
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
+			 attrs);
 }
 
 
@@ -91,8 +62,6 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				dma_get_mask(dev), direction, attrs);
 }
@@ -101,11 +70,8 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+	ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
 			   direction, attrs);
-	else
-		dma_direct_unmap_sg(dev, sglist, nelems, direction, attrs);
 }
 
 static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
@@ -113,8 +79,9 @@ static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct pci_controller *phb = pci_bus_to_host(pdev->bus);
 
-	return phb->controller_ops.iommu_bypass_supported &&
-		phb->controller_ops.iommu_bypass_supported(pdev, mask);
+	if (iommu_fixed_is_weak || !phb->controller_ops.iommu_bypass_supported)
+		return false;
+	return phb->controller_ops.iommu_bypass_supported(pdev, mask);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -123,7 +90,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) {
-		dev->archdata.iommu_bypass = true;
+		dev->dma_ops_bypass = true;
 		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
 		return 1;
 	}
@@ -141,7 +108,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	}
 
 	dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-	dev->archdata.iommu_bypass = false;
+	dev->dma_ops_bypass = false;
 	return 1;
 }
 
@@ -153,47 +120,12 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 	if (!tbl)
 		return 0;
 
-	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_direct_get_required_mask(dev);
-
-		if (dma_iommu_bypass_supported(dev, bypass_mask))
-			return bypass_mask;
-	}
-
 	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
 	mask += mask - 1;
 
 	return mask;
 }
 
-static void dma_iommu_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t size, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
-}
-
-static void dma_iommu_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_device(dev, addr, sz, dir);
-}
-
-extern void dma_iommu_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_cpu(dev, sgl, nents, dir);
-}
-
-extern void dma_iommu_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_device(dev, sgl, nents, dir);
-}
-
 const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
@@ -203,10 +135,6 @@ const struct dma_map_ops dma_iommu_ops = {
 	.map_page		= dma_iommu_map_page,
 	.unmap_page		= dma_iommu_unmap_page,
 	.get_required_mask	= dma_iommu_get_required_mask,
-	.sync_single_for_cpu	= dma_iommu_sync_for_cpu,
-	.sync_single_for_device	= dma_iommu_sync_for_device,
-	.sync_sg_for_cpu	= dma_iommu_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma_iommu_sync_sg_for_device,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
 };
-- 
2.20.1

[PATCH 2/2] powerpc: use the generic dma_ops_bypass mode

[Christoph Hellwig]

Use the DMA API bypass mechanism for direct window mappings.  This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all.  It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.

Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.

Fixes: efd176a04bef ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h |  5 --
 arch/powerpc/kernel/dma-iommu.c   | 90 ++++---------------------------
 2 files changed, 9 insertions(+), 86 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 266542769e4b..452402215e12 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -18,11 +18,6 @@ struct iommu_table;
  * drivers/macintosh/macio_asic.c
  */
 struct dev_archdata {
-	/*
-	 * Set to %true if the dma_iommu_ops are requested to use a direct
-	 * window instead of dynamically mapping memory.
-	 */
-	bool			iommu_bypass : 1;
 	/*
 	 * These two used to be a union. However, with the hybrid ops we need
 	 * both so here we store both a DMA offset for direct mappings and
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e486d1d78de2..569fecd7b5b2 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -14,23 +14,6 @@
  * Generic iommu implementation
  */
 
-/*
- * The coherent mask may be smaller than the real mask, check if we can
- * really use a direct window.
- */
-static inline bool dma_iommu_alloc_bypass(struct device *dev)
-{
-	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
-		dma_direct_supported(dev, dev->coherent_dma_mask);
-}
-
-static inline bool dma_iommu_map_bypass(struct device *dev,
-		unsigned long attrs)
-{
-	return dev->archdata.iommu_bypass &&
-		(!iommu_fixed_is_weak || (attrs & DMA_ATTR_WEAK_ORDERING));
-}
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -39,8 +22,6 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag,
 				      unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		return dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -50,11 +31,7 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle,
 				    unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_free(dev, size, vaddr, dma_handle, attrs);
-	else
-		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
-				dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -67,9 +44,6 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_page(dev, page, offset, size, direction,
-				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, dma_get_mask(dev), direction, attrs);
 }
@@ -79,11 +53,8 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size,
-				direction,  attrs);
-	else
-		dma_direct_unmap_page(dev, dma_handle, size, direction, attrs);
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
+			 attrs);
 }
 
 
@@ -91,8 +62,6 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				dma_get_mask(dev), direction, attrs);
 }
@@ -101,11 +70,8 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+	ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
 			   direction, attrs);
-	else
-		dma_direct_unmap_sg(dev, sglist, nelems, direction, attrs);
 }
 
 static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
@@ -113,8 +79,9 @@ static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct pci_controller *phb = pci_bus_to_host(pdev->bus);
 
-	return phb->controller_ops.iommu_bypass_supported &&
-		phb->controller_ops.iommu_bypass_supported(pdev, mask);
+	if (iommu_fixed_is_weak || !phb->controller_ops.iommu_bypass_supported)
+		return false;
+	return phb->controller_ops.iommu_bypass_supported(pdev, mask);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -123,7 +90,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) {
-		dev->archdata.iommu_bypass = true;
+		dev->dma_ops_bypass = true;
 		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
 		return 1;
 	}
@@ -141,7 +108,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	}
 
 	dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-	dev->archdata.iommu_bypass = false;
+	dev->dma_ops_bypass = false;
 	return 1;
 }
 
@@ -153,47 +120,12 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 	if (!tbl)
 		return 0;
 
-	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_direct_get_required_mask(dev);
-
-		if (dma_iommu_bypass_supported(dev, bypass_mask))
-			return bypass_mask;
-	}
-
 	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
 	mask += mask - 1;
 
 	return mask;
 }
 
-static void dma_iommu_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t size, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
-}
-
-static void dma_iommu_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_device(dev, addr, sz, dir);
-}
-
-extern void dma_iommu_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_cpu(dev, sgl, nents, dir);
-}
-
-extern void dma_iommu_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_device(dev, sgl, nents, dir);
-}
-
 const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
@@ -203,10 +135,6 @@ const struct dma_map_ops dma_iommu_ops = {
 	.map_page		= dma_iommu_map_page,
 	.unmap_page		= dma_iommu_unmap_page,
 	.get_required_mask	= dma_iommu_get_required_mask,
-	.sync_single_for_cpu	= dma_iommu_sync_for_cpu,
-	.sync_single_for_device	= dma_iommu_sync_for_device,
-	.sync_sg_for_cpu	= dma_iommu_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma_iommu_sync_sg_for_device,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
 };
-- 
2.20.1

Re: generic DMA bypass flag

[Robin Murphy]

On 13/11/2019 1:37 pm, Christoph Hellwig wrote:
> Hi all,
> 
> I've recently beeing chatting with Lu about using dma-iommu and
> per-device DMA ops in the intel IOMMU driver, and one missing feature
> in dma-iommu is a bypass mode where the direct mapping is used even
> when an iommu is attached to improve performance.  The powerpc
> code already has a similar mode, so I'd like to move it to the core
> DMA mapping code.  As part of that I noticed that the current
> powerpc code has a little bug in that it used the wrong check in the
> dma_sync_* routines to see if the direct mapping code is used.

In all honesty, this seems silly. If we can set a per-device flag to say 
"oh, bypass these ops and use some other ops instead", then we can just 
as easily simply give the device the appropriate ops in the first place. 
Because, y'know, the name of the game is "per-device ops".

> These two patches just add the generic code and move powerpc over,
> the intel IOMMU bits will require a separate discussion.

The ops need to match the default domain type, so the hard part of the 
problem is choosing when and if to switch that (particularly fun if 
there are multiple devices in the IOMMU group). Flipping between 
iommu-dma and dma-direct at that point will be trivial.

I don't see a great benefit to pulling legacy cruft out into common code 
instead of just working to get rid of it in-place, when said cruft pulls 
in the opposite direction to where we're taking the common code (i.e. 
it's inherently based on the premise of global ops).

Robin.

> The x86 AMD Gart code also has a bypass mode, but it is a lot
> strange, so I'm not going to touch it for now.
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: generic DMA bypass flag

[Robin Murphy]

On 13/11/2019 1:37 pm, Christoph Hellwig wrote:
> Hi all,
> 
> I've recently beeing chatting with Lu about using dma-iommu and
> per-device DMA ops in the intel IOMMU driver, and one missing feature
> in dma-iommu is a bypass mode where the direct mapping is used even
> when an iommu is attached to improve performance.  The powerpc
> code already has a similar mode, so I'd like to move it to the core
> DMA mapping code.  As part of that I noticed that the current
> powerpc code has a little bug in that it used the wrong check in the
> dma_sync_* routines to see if the direct mapping code is used.

In all honesty, this seems silly. If we can set a per-device flag to say 
"oh, bypass these ops and use some other ops instead", then we can just 
as easily simply give the device the appropriate ops in the first place. 
Because, y'know, the name of the game is "per-device ops".

> These two patches just add the generic code and move powerpc over,
> the intel IOMMU bits will require a separate discussion.

The ops need to match the default domain type, so the hard part of the 
problem is choosing when and if to switch that (particularly fun if 
there are multiple devices in the IOMMU group). Flipping between 
iommu-dma and dma-direct at that point will be trivial.

I don't see a great benefit to pulling legacy cruft out into common code 
instead of just working to get rid of it in-place, when said cruft pulls 
in the opposite direction to where we're taking the common code (i.e. 
it's inherently based on the premise of global ops).

Robin.

> The x86 AMD Gart code also has a bypass mode, but it is a lot
> strange, so I'm not going to touch it for now.
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> 

Re: generic DMA bypass flag

[Christoph Hellwig]

On Wed, Nov 13, 2019 at 02:45:15PM +0000, Robin Murphy wrote:
> In all honesty, this seems silly. If we can set a per-device flag to say 
> "oh, bypass these ops and use some other ops instead", then we can just as 
> easily simply give the device the appropriate ops in the first place. 
> Because, y'know, the name of the game is "per-device ops".

Except that we can't do it _that_ easily.  The problem is that for both
the powerpc and intel case the selection is dynamic.  If a device is in
the identify domain with intel-iommu (or the equivalent on powerpc which
doesn't use the normal iommu framework), we still want to use the iommu
to be able to map memory for devices with a too small dma mask using
the iommu instead of using swiotlb bouncing.  So to "just" use the
per-device dma ops we'd need:

  a) a hook in dma_direct_supported to pick another set of ops for
     small dma masks
  b) a hook in the IOMMU ops to propagate to the direct ops for full
     64-bit masks

I looked into that for powerpc a while ago and it wasn't pretty at all.
Compared to that just checking another flag for the DMA direct calls
is relatively clean and trivial as seens in the diffstat for this series
alone.

> I don't see a great benefit to pulling legacy cruft out into common code 
> instead of just working to get rid of it in-place, when said cruft pulls in 
> the opposite direction to where we're taking the common code (i.e. it's 
> inherently based on the premise of global ops).

I'm not sure what legacy cruft it pull in.  I think it actually fits very
much into a mental model of "direct mapping is the default, to be overriden
if needed" which is pretty close to what we have at the moment.  Just
with a slightly more complicated processing of the override.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: generic DMA bypass flag

[Christoph Hellwig]

On Wed, Nov 13, 2019 at 02:45:15PM +0000, Robin Murphy wrote:
> In all honesty, this seems silly. If we can set a per-device flag to say 
> "oh, bypass these ops and use some other ops instead", then we can just as 
> easily simply give the device the appropriate ops in the first place. 
> Because, y'know, the name of the game is "per-device ops".

Except that we can't do it _that_ easily.  The problem is that for both
the powerpc and intel case the selection is dynamic.  If a device is in
the identify domain with intel-iommu (or the equivalent on powerpc which
doesn't use the normal iommu framework), we still want to use the iommu
to be able to map memory for devices with a too small dma mask using
the iommu instead of using swiotlb bouncing.  So to "just" use the
per-device dma ops we'd need:

  a) a hook in dma_direct_supported to pick another set of ops for
     small dma masks
  b) a hook in the IOMMU ops to propagate to the direct ops for full
     64-bit masks

I looked into that for powerpc a while ago and it wasn't pretty at all.
Compared to that just checking another flag for the DMA direct calls
is relatively clean and trivial as seens in the diffstat for this series
alone.

> I don't see a great benefit to pulling legacy cruft out into common code 
> instead of just working to get rid of it in-place, when said cruft pulls in 
> the opposite direction to where we're taking the common code (i.e. it's 
> inherently based on the premise of global ops).

I'm not sure what legacy cruft it pull in.  I think it actually fits very
much into a mental model of "direct mapping is the default, to be overriden
if needed" which is pretty close to what we have at the moment.  Just
with a slightly more complicated processing of the override.

Re: generic DMA bypass flag

[Christoph Hellwig]

On Wed, Nov 13, 2019 at 02:45:15PM +0000, Robin Murphy wrote:
> In all honesty, this seems silly. If we can set a per-device flag to say 
> "oh, bypass these ops and use some other ops instead", then we can just as 
> easily simply give the device the appropriate ops in the first place. 
> Because, y'know, the name of the game is "per-device ops".

Except that we can't do it _that_ easily.  The problem is that for both
the powerpc and intel case the selection is dynamic.  If a device is in
the identify domain with intel-iommu (or the equivalent on powerpc which
doesn't use the normal iommu framework), we still want to use the iommu
to be able to map memory for devices with a too small dma mask using
the iommu instead of using swiotlb bouncing.  So to "just" use the
per-device dma ops we'd need:

  a) a hook in dma_direct_supported to pick another set of ops for
     small dma masks
  b) a hook in the IOMMU ops to propagate to the direct ops for full
     64-bit masks

I looked into that for powerpc a while ago and it wasn't pretty at all.
Compared to that just checking another flag for the DMA direct calls
is relatively clean and trivial as seens in the diffstat for this series
alone.

> I don't see a great benefit to pulling legacy cruft out into common code 
> instead of just working to get rid of it in-place, when said cruft pulls in 
> the opposite direction to where we're taking the common code (i.e. it's 
> inherently based on the premise of global ops).

I'm not sure what legacy cruft it pull in.  I think it actually fits very
much into a mental model of "direct mapping is the default, to be overriden
if needed" which is pretty close to what we have at the moment.  Just
with a slightly more complicated processing of the override.

Re: generic DMA bypass flag

[Robin Murphy]

On 14/11/2019 7:41 am, Christoph Hellwig wrote:
> On Wed, Nov 13, 2019 at 02:45:15PM +0000, Robin Murphy wrote:
>> In all honesty, this seems silly. If we can set a per-device flag to say
>> "oh, bypass these ops and use some other ops instead", then we can just as
>> easily simply give the device the appropriate ops in the first place.
>> Because, y'know, the name of the game is "per-device ops".
> 
> Except that we can't do it _that_ easily.  The problem is that for both
> the powerpc and intel case the selection is dynamic.  If a device is in
> the identify domain with intel-iommu (or the equivalent on powerpc which
> doesn't use the normal iommu framework), we still want to use the iommu
> to be able to map memory for devices with a too small dma mask using
> the iommu instead of using swiotlb bouncing.  So to "just" use the
> per-device dma ops we'd need:
> 
>    a) a hook in dma_direct_supported to pick another set of ops for
>       small dma masks
>    b) a hook in the IOMMU ops to propagate to the direct ops for full
>       64-bit masks

And is that any different from where you would choose to "just" set a 
generic bypass flag?


diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index d658c7c6a2ab..40e096d3dbc5 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2242,12 +2242,14 @@ request_default_domain_for_dev(struct device 
*dev, unsigned long type)
  /* Request that a device is direct mapped by the IOMMU */
  int iommu_request_dm_for_dev(struct device *dev)
  {
+	set_dma_ops(dev, NULL);
  	return request_default_domain_for_dev(dev, IOMMU_DOMAIN_IDENTITY);
  }

  /* Request that a device can't be direct mapped by the IOMMU */
  int iommu_request_dma_domain_for_dev(struct device *dev)
  {
+	set_dma_ops(dev, &iommu_dma_ops);
  	return request_default_domain_for_dev(dev, IOMMU_DOMAIN_DMA);
  }


If intel-iommu gets fully converted such that everyone using default 
domains is also using iommu-dma, that should be it as far as the generic 
DMA ops are concerned (ultimately we might even be able to do it in 
__iommu_attach_device() based on the domain type). Like I said, the hard 
part is deciding when to make *these* calls, but apparently intel-iommu 
can already do that.

> I looked into that for powerpc a while ago and it wasn't pretty at all.
> Compared to that just checking another flag for the DMA direct calls
> is relatively clean and trivial as seens in the diffstat for this series
> alone.
> 
>> I don't see a great benefit to pulling legacy cruft out into common code
>> instead of just working to get rid of it in-place, when said cruft pulls in
>> the opposite direction to where we're taking the common code (i.e. it's
>> inherently based on the premise of global ops).
> 
> I'm not sure what legacy cruft it pull in.  I think it actually fits very
> much into a mental model of "direct mapping is the default, to be overriden
> if needed" which is pretty close to what we have at the moment.  Just
> with a slightly more complicated processing of the override.

Because the specific "slightly more complicated" currently used by the 
existing powerpc code will AFAICS continue to be needed only by the 
existing powerpc code, thus I don't see any benefit to cluttering up the 
common code with it today. You may as well just refactor powerpc to 
swizzle its own ops to obviate archdata.iommu_bypass, and delete a fair 
chunk of old code.

Robin.

Re: generic DMA bypass flag

[Robin Murphy]

On 14/11/2019 7:41 am, Christoph Hellwig wrote:
> On Wed, Nov 13, 2019 at 02:45:15PM +0000, Robin Murphy wrote:
>> In all honesty, this seems silly. If we can set a per-device flag to say
>> "oh, bypass these ops and use some other ops instead", then we can just as
>> easily simply give the device the appropriate ops in the first place.
>> Because, y'know, the name of the game is "per-device ops".
> 
> Except that we can't do it _that_ easily.  The problem is that for both
> the powerpc and intel case the selection is dynamic.  If a device is in
> the identify domain with intel-iommu (or the equivalent on powerpc which
> doesn't use the normal iommu framework), we still want to use the iommu
> to be able to map memory for devices with a too small dma mask using
> the iommu instead of using swiotlb bouncing.  So to "just" use the
> per-device dma ops we'd need:
> 
>    a) a hook in dma_direct_supported to pick another set of ops for
>       small dma masks
>    b) a hook in the IOMMU ops to propagate to the direct ops for full
>       64-bit masks

And is that any different from where you would choose to "just" set a 
generic bypass flag?


diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index d658c7c6a2ab..40e096d3dbc5 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2242,12 +2242,14 @@ request_default_domain_for_dev(struct device 
*dev, unsigned long type)
  /* Request that a device is direct mapped by the IOMMU */
  int iommu_request_dm_for_dev(struct device *dev)
  {
+	set_dma_ops(dev, NULL);
  	return request_default_domain_for_dev(dev, IOMMU_DOMAIN_IDENTITY);
  }

  /* Request that a device can't be direct mapped by the IOMMU */
  int iommu_request_dma_domain_for_dev(struct device *dev)
  {
+	set_dma_ops(dev, &iommu_dma_ops);
  	return request_default_domain_for_dev(dev, IOMMU_DOMAIN_DMA);
  }


If intel-iommu gets fully converted such that everyone using default 
domains is also using iommu-dma, that should be it as far as the generic 
DMA ops are concerned (ultimately we might even be able to do it in 
__iommu_attach_device() based on the domain type). Like I said, the hard 
part is deciding when to make *these* calls, but apparently intel-iommu 
can already do that.

> I looked into that for powerpc a while ago and it wasn't pretty at all.
> Compared to that just checking another flag for the DMA direct calls
> is relatively clean and trivial as seens in the diffstat for this series
> alone.
> 
>> I don't see a great benefit to pulling legacy cruft out into common code
>> instead of just working to get rid of it in-place, when said cruft pulls in
>> the opposite direction to where we're taking the common code (i.e. it's
>> inherently based on the premise of global ops).
> 
> I'm not sure what legacy cruft it pull in.  I think it actually fits very
> much into a mental model of "direct mapping is the default, to be overriden
> if needed" which is pretty close to what we have at the moment.  Just
> with a slightly more complicated processing of the override.

Because the specific "slightly more complicated" currently used by the 
existing powerpc code will AFAICS continue to be needed only by the 
existing powerpc code, thus I don't see any benefit to cluttering up the 
common code with it today. You may as well just refactor powerpc to 
swizzle its own ops to obviate archdata.iommu_bypass, and delete a fair 
chunk of old code.

Robin.

Re: generic DMA bypass flag

[Christoph Hellwig]

On Fri, Nov 15, 2019 at 06:12:48PM +0000, Robin Murphy wrote:
> And is that any different from where you would choose to "just" set a 
> generic bypass flag?

Same spots, as intel-iommu moves from the identify to a dma domain when
setting a 32-bit mask.  But that means once a 32-bit mask is set we can't
ever go back to the 64-bit one.  And we had a couple drivers playing
interesting games there.  FYI, this is the current intel-iommu
WIP conversion to the dma bypass flag:

http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass

Re: generic DMA bypass flag

[Christoph Hellwig]

On Fri, Nov 15, 2019 at 06:12:48PM +0000, Robin Murphy wrote:
> And is that any different from where you would choose to "just" set a 
> generic bypass flag?

Same spots, as intel-iommu moves from the identify to a dma domain when
setting a 32-bit mask.  But that means once a 32-bit mask is set we can't
ever go back to the 64-bit one.  And we had a couple drivers playing
interesting games there.  FYI, this is the current intel-iommu
WIP conversion to the dma bypass flag:

http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass

Re: generic DMA bypass flag

[Robin Murphy]

On 16/11/2019 6:22 am, Christoph Hellwig wrote:
> On Fri, Nov 15, 2019 at 06:12:48PM +0000, Robin Murphy wrote:
>> And is that any different from where you would choose to "just" set a
>> generic bypass flag?
> 
> Same spots, as intel-iommu moves from the identify to a dma domain when
> setting a 32-bit mask.  But that means once a 32-bit mask is set we can't
> ever go back to the 64-bit one.

Is that a problem though? It's not safe in general to rewrite the 
default domain willy-nilly, so if it's a concern that drivers get stuck 
having to use a translation domain if they do something dumb like:

	if (!dma_set_mask(DMA_BIT_MASK(32))
		dma_set_mask(DMA_BIT_MASK(64));

then the simple solution is "don't do that" - note that this doesn't 
affect overriding of the default 32-bit mask, because we don't use the 
driver API to initialise those.

>  And we had a couple drivers playing
> interesting games there.

If the games you're worried about are stuff like:

	dma_set_mask(dev, DMA_BIT_MASK(64));
	high_buf = dma_alloc_coherent(dev, ...);
	dma_set_mask(dev, DMA_BIT_MASK(32));
	low_buf = dma_alloc_coherent(dev, ...);

then iommu_need_mapping() already ensures that will end spectacularly 
badly. Unless we can somehow log when a mask has been "committed" by a 
mapping operation, I don't think any kind of opportunistic bypass 
mechanism is ever not going to blow up that case.

>  FYI, this is the current intel-iommu
> WIP conversion to the dma bypass flag:
> 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass

Having thought a bit more, I guess my idea does end up with one slightly 
ugly corner wherein dma_direct_supported() has to learn to look for an 
IOMMU default domain and try iommu_dma_supported() before saying no, 
even if it's clean everywhere else. The bypass flag is more 'balanced' 
in terms of being equally invasive everywhere and preserving abstraction 
a bit better. Plus I think it might let us bring back the default 
assignment of dma_dummy_ops, which I do like the thought of :D

Either way, making sure that the fundamental bypass decision is correct 
and robust is still far more important than the implementation details.

Robin.

Re: generic DMA bypass flag

[Robin Murphy]

On 16/11/2019 6:22 am, Christoph Hellwig wrote:
> On Fri, Nov 15, 2019 at 06:12:48PM +0000, Robin Murphy wrote:
>> And is that any different from where you would choose to "just" set a
>> generic bypass flag?
> 
> Same spots, as intel-iommu moves from the identify to a dma domain when
> setting a 32-bit mask.  But that means once a 32-bit mask is set we can't
> ever go back to the 64-bit one.

Is that a problem though? It's not safe in general to rewrite the 
default domain willy-nilly, so if it's a concern that drivers get stuck 
having to use a translation domain if they do something dumb like:

	if (!dma_set_mask(DMA_BIT_MASK(32))
		dma_set_mask(DMA_BIT_MASK(64));

then the simple solution is "don't do that" - note that this doesn't 
affect overriding of the default 32-bit mask, because we don't use the 
driver API to initialise those.

>  And we had a couple drivers playing
> interesting games there.

If the games you're worried about are stuff like:

	dma_set_mask(dev, DMA_BIT_MASK(64));
	high_buf = dma_alloc_coherent(dev, ...);
	dma_set_mask(dev, DMA_BIT_MASK(32));
	low_buf = dma_alloc_coherent(dev, ...);

then iommu_need_mapping() already ensures that will end spectacularly 
badly. Unless we can somehow log when a mask has been "committed" by a 
mapping operation, I don't think any kind of opportunistic bypass 
mechanism is ever not going to blow up that case.

>  FYI, this is the current intel-iommu
> WIP conversion to the dma bypass flag:
> 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass

Having thought a bit more, I guess my idea does end up with one slightly 
ugly corner wherein dma_direct_supported() has to learn to look for an 
IOMMU default domain and try iommu_dma_supported() before saying no, 
even if it's clean everywhere else. The bypass flag is more 'balanced' 
in terms of being equally invasive everywhere and preserving abstraction 
a bit better. Plus I think it might let us bring back the default 
assignment of dma_dummy_ops, which I do like the thought of :D

Either way, making sure that the fundamental bypass decision is correct 
and robust is still far more important than the implementation details.

Robin.

Re: generic DMA bypass flag

[Christoph Hellwig]

On Tue, Nov 19, 2019 at 05:41:58PM +0000, Robin Murphy wrote:
> Is that a problem though? It's not safe in general to rewrite the default 
> domain willy-nilly,

Well.  Can you look at what intel-iommu does right now so that we can
sort that out first?

> so if it's a concern that drivers get stuck having to 
> use a translation domain if they do something dumb like:
>
> 	if (!dma_set_mask(DMA_BIT_MASK(32))
> 		dma_set_mask(DMA_BIT_MASK(64));
>
> then the simple solution is "don't do that" - note that this doesn't affect 
> overriding of the default 32-bit mask, because we don't use the driver API 
> to initialise those.

>>  And we had a couple drivers playing
>> interesting games there.
>
> If the games you're worried about are stuff like:
>
> 	dma_set_mask(dev, DMA_BIT_MASK(64));
> 	high_buf = dma_alloc_coherent(dev, ...);
> 	dma_set_mask(dev, DMA_BIT_MASK(32));
> 	low_buf = dma_alloc_coherent(dev, ...);
>
> then iommu_need_mapping() already ensures that will end spectacularly 
> badly. Unless we can somehow log when a mask has been "committed" by a 
> mapping operation, I don't think any kind of opportunistic bypass mechanism 
> is ever not going to blow up that case.

The prime example I had in mind is sata_nv.c.  This first does
a

	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));

and does a dma_alloc_coherent for buffers that have "legacy" descriptors.
Then does a

	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));

and allocates the other coherent buffers than can be 64-bit capable.
and then actually overrides the streaming dma mask to 32-bit if
there is an ATAPI device attached for which it has some limitations,
or otherwise keeps the 64-bit mask in a somewhat odd way.  But
this device actually can't be used with intel IOMMU as it is integrted
into the nforce chipsets.

But looking through this mess I'm tempted to agree with you that if
anyone is messing with the mask to first set it to 32-bit and then
back they can live with the default domain and iommu overhead..

>>  FYI, this is the current intel-iommu
>> WIP conversion to the dma bypass flag:
>>
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass
>
> Having thought a bit more, I guess my idea does end up with one slightly 
> ugly corner wherein dma_direct_supported() has to learn to look for an 
> IOMMU default domain and try iommu_dma_supported() before saying no, even 
> if it's clean everywhere else.

Yes, that actually is my main worry.  The "upgrading" from dma_iommu_ops
to direct / NULL is pretty easy and clean, it is the other way that is
a mess.

> The bypass flag is more 'balanced' in terms 
> of being equally invasive everywhere and preserving abstraction a bit 
> better. Plus I think it might let us bring back the default assignment of 
> dma_dummy_ops, which I do like the thought of :D

I was hoping to get rid of dma_dummy_ops once we've killed off the last
leftovers of allowing DMA with a NULL dma_mask or *dma_mask and just
reject all DMA operations in that case.

> Either way, making sure that the fundamental bypass decision is correct and 
> robust is still far more important than the implementation details.

So maybe we should massage intel-iommu toward that first.  Let me and Lu
know what makes sense to improve.

Re: generic DMA bypass flag

[Christoph Hellwig]

On Tue, Nov 19, 2019 at 05:41:58PM +0000, Robin Murphy wrote:
> Is that a problem though? It's not safe in general to rewrite the default 
> domain willy-nilly,

Well.  Can you look at what intel-iommu does right now so that we can
sort that out first?

> so if it's a concern that drivers get stuck having to 
> use a translation domain if they do something dumb like:
>
> 	if (!dma_set_mask(DMA_BIT_MASK(32))
> 		dma_set_mask(DMA_BIT_MASK(64));
>
> then the simple solution is "don't do that" - note that this doesn't affect 
> overriding of the default 32-bit mask, because we don't use the driver API 
> to initialise those.

>>  And we had a couple drivers playing
>> interesting games there.
>
> If the games you're worried about are stuff like:
>
> 	dma_set_mask(dev, DMA_BIT_MASK(64));
> 	high_buf = dma_alloc_coherent(dev, ...);
> 	dma_set_mask(dev, DMA_BIT_MASK(32));
> 	low_buf = dma_alloc_coherent(dev, ...);
>
> then iommu_need_mapping() already ensures that will end spectacularly 
> badly. Unless we can somehow log when a mask has been "committed" by a 
> mapping operation, I don't think any kind of opportunistic bypass mechanism 
> is ever not going to blow up that case.

The prime example I had in mind is sata_nv.c.  This first does
a

	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));

and does a dma_alloc_coherent for buffers that have "legacy" descriptors.
Then does a

	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));

and allocates the other coherent buffers than can be 64-bit capable.
and then actually overrides the streaming dma mask to 32-bit if
there is an ATAPI device attached for which it has some limitations,
or otherwise keeps the 64-bit mask in a somewhat odd way.  But
this device actually can't be used with intel IOMMU as it is integrted
into the nforce chipsets.

But looking through this mess I'm tempted to agree with you that if
anyone is messing with the mask to first set it to 32-bit and then
back they can live with the default domain and iommu overhead..

>>  FYI, this is the current intel-iommu
>> WIP conversion to the dma bypass flag:
>>
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-bypass
>
> Having thought a bit more, I guess my idea does end up with one slightly 
> ugly corner wherein dma_direct_supported() has to learn to look for an 
> IOMMU default domain and try iommu_dma_supported() before saying no, even 
> if it's clean everywhere else.

Yes, that actually is my main worry.  The "upgrading" from dma_iommu_ops
to direct / NULL is pretty easy and clean, it is the other way that is
a mess.

> The bypass flag is more 'balanced' in terms 
> of being equally invasive everywhere and preserving abstraction a bit 
> better. Plus I think it might let us bring back the default assignment of 
> dma_dummy_ops, which I do like the thought of :D

I was hoping to get rid of dma_dummy_ops once we've killed off the last
leftovers of allowing DMA with a NULL dma_mask or *dma_mask and just
reject all DMA operations in that case.

> Either way, making sure that the fundamental bypass decision is correct and 
> robust is still far more important than the implementation details.

So maybe we should massage intel-iommu toward that first.  Let me and Lu
know what makes sense to improve.

Re: generic DMA bypass flag

[Christoph Hellwig]

Robin, does this mean you ACK this series for the powerpc use case?

Alexey and other ppc folks: can you take a look?
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: generic DMA bypass flag

[Christoph Hellwig]

Robin, does this mean you ACK this series for the powerpc use case?

Alexey and other ppc folks: can you take a look?

Re: generic DMA bypass flag

[Christoph Hellwig]

Robin, does this mean you ACK this series for the powerpc use case?

Alexey and other ppc folks: can you take a look?

Re: generic DMA bypass flag

[Robin Murphy]

On 21/11/2019 7:34 am, Christoph Hellwig wrote:
> Robin, does this mean you ACK this series for the powerpc use case?

Yeah, I think we've nailed down sufficient justification now for having 
a generalised flag, so at that point it makes every bit of sense to 
convert PPC's private equivalent.

Robin.

> Alexey and other ppc folks: can you take a look?
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: generic DMA bypass flag

[Robin Murphy]

On 21/11/2019 7:34 am, Christoph Hellwig wrote:
> Robin, does this mean you ACK this series for the powerpc use case?

Yeah, I think we've nailed down sufficient justification now for having 
a generalised flag, so at that point it makes every bit of sense to 
convert PPC's private equivalent.

Robin.

> Alexey and other ppc folks: can you take a look?
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>