[PATCH 0/6] sched/nohz: Make the rest of kcpustat vtime aware v3

[PATCH 0/6] sched/nohz: Make the rest of kcpustat vtime aware v3

[Frederic Weisbecker]

(For the record, see v2 at
https://lore.kernel.org/lkml/20191119232218.4206-1-frederic@kernel.org/ )

This set addresses reviews from Ingo on previous take:

* Fix comment nit
* Remind in comment about the reschedule IPI that may happen on renice
* Constify input
* Indent a few blocks of assignments
* Use struct kernel_cpustat as an output for kcpustat accessor. It makes
  things easier and cleaner than the independant variables.

git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks.git
	nohz/kcpustat-v5

HEAD: 8941f0df7da73e1d95f0c0bed0121a14cdb52873

Thanks,
	Frederic
---

Frederic Weisbecker (6):
      sched/cputime: Support other fields on kcpustat_field()
      sched/vtime: Bring up complete kcpustat accessor
      procfs: Use all-in-one vtime aware kcpustat accessor
      cpufreq: Use vtime aware kcpustat accessors for user time
      leds: Use all-in-one vtime aware kcpustat accessor
      rackmeter: Use vtime aware kcpustat accessor


 drivers/cpufreq/cpufreq.c               |  17 +--
 drivers/cpufreq/cpufreq_governor.c      |   6 +-
 drivers/leds/trigger/ledtrig-activity.c |  14 ++-
 drivers/macintosh/rack-meter.c          |   7 +-
 fs/proc/stat.c                          |  56 +++++-----
 include/linux/kernel_stat.h             |   7 ++
 kernel/sched/cputime.c                  | 190 ++++++++++++++++++++++++++------
 7 files changed, 223 insertions(+), 74 deletions(-)

[PATCH 1/6] sched/cputime: Support other fields on kcpustat_field()

[Frederic Weisbecker]

Provide support for user, nice, guest and guest_nice fields through
kcpustat_field().

Whether we account the delta to a nice or not nice field is decided on
top of the nice value snapshot taken at the time we call kcpustat_field().
If the nice value of the task has been changed since the last vtime
update, we may have inacurrate distribution of the nice VS unnice
cputime.

However this is considered as a minor issue compared to the proper fix
that would involve interrupting the target on nice updates, which is
undesired on nohz_full CPUs.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 kernel/sched/cputime.c | 54 +++++++++++++++++++++++++++++++++---------
 1 file changed, 43 insertions(+), 11 deletions(-)

diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index e0cd20693ef5..27b5406222fc 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -912,11 +912,21 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 }
 
+static u64 kcpustat_user_vtime(struct vtime *vtime)
+{
+	if (vtime->state == VTIME_USER)
+		return vtime->utime + vtime_delta(vtime);
+	else if (vtime->state == VTIME_GUEST)
+		return vtime->gtime + vtime_delta(vtime);
+	return 0;
+}
+
 static int kcpustat_field_vtime(u64 *cpustat,
-				struct vtime *vtime,
+				struct task_struct *tsk,
 				enum cpu_usage_stat usage,
 				int cpu, u64 *val)
 {
+	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
 	int err;
 
@@ -946,9 +956,37 @@ static int kcpustat_field_vtime(u64 *cpustat,
 
 		*val = cpustat[usage];
 
-		if (vtime->state == VTIME_SYS)
-			*val += vtime->stime + vtime_delta(vtime);
-
+		/*
+		 * Nice VS unnice cputime accounting may be inaccurate if
+		 * the nice value has changed since the last vtime update.
+		 * But proper fix would involve interrupting target on nice
+		 * updates which is a no go on nohz_full (although the scheduler
+		 * may still interrupt the target if rescheduling is needed...)
+		 */
+		switch (usage) {
+		case CPUTIME_SYSTEM:
+			if (vtime->state == VTIME_SYS)
+				*val += vtime->stime + vtime_delta(vtime);
+			break;
+		case CPUTIME_USER:
+			if (task_nice(tsk) <= 0)
+				*val += kcpustat_user_vtime(vtime);
+			break;
+		case CPUTIME_NICE:
+			if (task_nice(tsk) > 0)
+				*val += kcpustat_user_vtime(vtime);
+			break;
+		case CPUTIME_GUEST:
+			if (vtime->state == VTIME_GUEST && task_nice(tsk) <= 0)
+				*val += vtime->gtime + vtime_delta(vtime);
+			break;
+		case CPUTIME_GUEST_NICE:
+			if (vtime->state == VTIME_GUEST && task_nice(tsk) > 0)
+				*val += vtime->gtime + vtime_delta(vtime);
+			break;
+		default:
+			break;
+		}
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 
 	return 0;
@@ -965,15 +1003,10 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 	if (!vtime_accounting_enabled_cpu(cpu))
 		return cpustat[usage];
 
-	/* Only support sys vtime for now */
-	if (usage != CPUTIME_SYSTEM)
-		return cpustat[usage];
-
 	rq = cpu_rq(cpu);
 
 	for (;;) {
 		struct task_struct *curr;
-		struct vtime *vtime;
 
 		rcu_read_lock();
 		curr = rcu_dereference(rq->curr);
@@ -982,8 +1015,7 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 			return cpustat[usage];
 		}
 
-		vtime = &curr->vtime;
-		err = kcpustat_field_vtime(cpustat, vtime, usage, cpu, &val);
+		err = kcpustat_field_vtime(cpustat, curr, usage, cpu, &val);
 		rcu_read_unlock();
 
 		if (!err)
-- 
2.23.0

[tip: sched/core] sched/cputime: Support other fields on kcpustat_field()

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     5a1c95580f1d89c8a736bb02ecd82a8858388b8a
Gitweb:        https://git.kernel.org/tip/5a1c95580f1d89c8a736bb02ecd82a8858388b8a
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:25 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:33:23 +01:00

sched/cputime: Support other fields on kcpustat_field()

Provide support for user, nice, guest and guest_nice fields through
kcpustat_field().

Whether we account the delta to a nice or not nice field is decided on
top of the nice value snapshot taken at the time we call kcpustat_field().
If the nice value of the task has been changed since the last vtime
update, we may have inacurrate distribution of the nice VS unnice
cputime.

However this is considered as a minor issue compared to the proper fix
that would involve interrupting the target on nice updates, which is
undesired on nohz_full CPUs.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 kernel/sched/cputime.c | 54 ++++++++++++++++++++++++++++++++---------
 1 file changed, 43 insertions(+), 11 deletions(-)

diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index e0cd206..27b5406 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -912,11 +912,21 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 }
 
+static u64 kcpustat_user_vtime(struct vtime *vtime)
+{
+	if (vtime->state == VTIME_USER)
+		return vtime->utime + vtime_delta(vtime);
+	else if (vtime->state == VTIME_GUEST)
+		return vtime->gtime + vtime_delta(vtime);
+	return 0;
+}
+
 static int kcpustat_field_vtime(u64 *cpustat,
-				struct vtime *vtime,
+				struct task_struct *tsk,
 				enum cpu_usage_stat usage,
 				int cpu, u64 *val)
 {
+	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
 	int err;
 
@@ -946,9 +956,37 @@ static int kcpustat_field_vtime(u64 *cpustat,
 
 		*val = cpustat[usage];
 
-		if (vtime->state == VTIME_SYS)
-			*val += vtime->stime + vtime_delta(vtime);
-
+		/*
+		 * Nice VS unnice cputime accounting may be inaccurate if
+		 * the nice value has changed since the last vtime update.
+		 * But proper fix would involve interrupting target on nice
+		 * updates which is a no go on nohz_full (although the scheduler
+		 * may still interrupt the target if rescheduling is needed...)
+		 */
+		switch (usage) {
+		case CPUTIME_SYSTEM:
+			if (vtime->state == VTIME_SYS)
+				*val += vtime->stime + vtime_delta(vtime);
+			break;
+		case CPUTIME_USER:
+			if (task_nice(tsk) <= 0)
+				*val += kcpustat_user_vtime(vtime);
+			break;
+		case CPUTIME_NICE:
+			if (task_nice(tsk) > 0)
+				*val += kcpustat_user_vtime(vtime);
+			break;
+		case CPUTIME_GUEST:
+			if (vtime->state == VTIME_GUEST && task_nice(tsk) <= 0)
+				*val += vtime->gtime + vtime_delta(vtime);
+			break;
+		case CPUTIME_GUEST_NICE:
+			if (vtime->state == VTIME_GUEST && task_nice(tsk) > 0)
+				*val += vtime->gtime + vtime_delta(vtime);
+			break;
+		default:
+			break;
+		}
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 
 	return 0;
@@ -965,15 +1003,10 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 	if (!vtime_accounting_enabled_cpu(cpu))
 		return cpustat[usage];
 
-	/* Only support sys vtime for now */
-	if (usage != CPUTIME_SYSTEM)
-		return cpustat[usage];
-
 	rq = cpu_rq(cpu);
 
 	for (;;) {
 		struct task_struct *curr;
-		struct vtime *vtime;
 
 		rcu_read_lock();
 		curr = rcu_dereference(rq->curr);
@@ -982,8 +1015,7 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 			return cpustat[usage];
 		}
 
-		vtime = &curr->vtime;
-		err = kcpustat_field_vtime(cpustat, vtime, usage, cpu, &val);
+		err = kcpustat_field_vtime(cpustat, curr, usage, cpu, &val);
 		rcu_read_unlock();
 
 		if (!err)

[PATCH 2/6] sched/vtime: Bring up complete kcpustat accessor

[Frederic Weisbecker]

Many callsites want to fetch the values of system, user, user_nice, guest
or guest_nice kcpustat fields altogether or at least a pair of these.

In that case calling kcpustat_field() for each requested field brings
unecessary overhead when we could fetch all of them in a row.

So provide kcpustat_cpu_fetch() that fetches the whole kcpustat array
in a vtime safe way under the same RCU and seqcount block.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 include/linux/kernel_stat.h |   7 ++
 kernel/sched/cputime.c      | 136 ++++++++++++++++++++++++++++++------
 2 files changed, 123 insertions(+), 20 deletions(-)

diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 79781196eb25..89f0745c096d 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -81,12 +81,19 @@ static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
 extern u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 			  enum cpu_usage_stat usage, int cpu);
+extern void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu);
 #else
 static inline u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 				 enum cpu_usage_stat usage, int cpu)
 {
 	return kcpustat->cpustat[usage];
 }
+
+static inline void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
+{
+	*dst = kcpustat_cpu(cpu);
+}
+
 #endif
 
 extern void account_user_time(struct task_struct *, u64);
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 27b5406222fc..d43318a489f2 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -912,6 +912,30 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 }
 
+static int vtime_state_check(struct vtime *vtime, int cpu)
+{
+	/*
+	 * We raced against a context switch, fetch the
+	 * kcpustat task again.
+	 */
+	if (vtime->cpu != cpu && vtime->cpu != -1)
+		return -EAGAIN;
+
+	/*
+	 * Two possible things here:
+	 * 1) We are seeing the scheduling out task (prev) or any past one.
+	 * 2) We are seeing the scheduling in task (next) but it hasn't
+	 *    passed though vtime_task_switch() yet so the pending
+	 *    cputime of the prev task may not be flushed yet.
+	 *
+	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
+	 */
+	if (vtime->state == VTIME_INACTIVE)
+		return -EAGAIN;
+
+	return 0;
+}
+
 static u64 kcpustat_user_vtime(struct vtime *vtime)
 {
 	if (vtime->state == VTIME_USER)
@@ -933,26 +957,9 @@ static int kcpustat_field_vtime(u64 *cpustat,
 	do {
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		/*
-		 * We raced against context switch, fetch the
-		 * kcpustat task again.
-		 */
-		if (vtime->cpu != cpu && vtime->cpu != -1)
-			return -EAGAIN;
-
-		/*
-		 * Two possible things here:
-		 * 1) We are seeing the scheduling out task (prev) or any past one.
-		 * 2) We are seeing the scheduling in task (next) but it hasn't
-		 *    passed though vtime_task_switch() yet so the pending
-		 *    cputime of the prev task may not be flushed yet.
-		 *
-		 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
-		 */
-		if (vtime->state == VTIME_INACTIVE)
-			return -EAGAIN;
-
-		err = 0;
+		err = vtime_state_check(vtime, cpu);
+		if (err < 0)
+			return err;
 
 		*val = cpustat[usage];
 
@@ -1025,4 +1032,93 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 	}
 }
 EXPORT_SYMBOL_GPL(kcpustat_field);
+
+static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
+				    const struct kernel_cpustat *src,
+				    struct task_struct *tsk, int cpu)
+{
+	struct vtime *vtime = &tsk->vtime;
+	unsigned int seq;
+	int err;
+
+	do {
+		u64 *cpustat;
+		u64 delta;
+
+		seq = read_seqcount_begin(&vtime->seqcount);
+
+		err = vtime_state_check(vtime, cpu);
+		if (err < 0)
+			return err;
+
+		*dst = *src;
+		cpustat = dst->cpustat;
+
+		/* Task is sleeping, dead or idle, nothing to add */
+		if (vtime->state < VTIME_SYS)
+			continue;
+
+		delta = vtime_delta(vtime);
+
+		/*
+		 * Task runs either in user (including guest) or kernel space,
+		 * add pending nohz time to the right place.
+		 */
+		if (vtime->state == VTIME_SYS) {
+			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
+		} else if (vtime->state == VTIME_USER) {
+			if (task_nice(tsk) > 0)
+				cpustat[CPUTIME_NICE] += vtime->utime + delta;
+			else
+				cpustat[CPUTIME_USER] += vtime->utime + delta;
+		} else {
+			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
+			if (task_nice(tsk) > 0) {
+				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
+				cpustat[CPUTIME_NICE] += vtime->gtime + delta;
+			} else {
+				cpustat[CPUTIME_GUEST] += vtime->gtime + delta;
+				cpustat[CPUTIME_USER] += vtime->gtime + delta;
+			}
+		}
+	} while (read_seqcount_retry(&vtime->seqcount, seq));
+
+	return err;
+}
+
+void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
+{
+	const struct kernel_cpustat *src = &kcpustat_cpu(cpu);
+	struct rq *rq;
+	int err;
+
+	if (!vtime_accounting_enabled_cpu(cpu)) {
+		*dst = *src;
+		return;
+	}
+
+	rq = cpu_rq(cpu);
+
+	for (;;) {
+		struct task_struct *curr;
+
+		rcu_read_lock();
+		curr = rcu_dereference(rq->curr);
+		if (WARN_ON_ONCE(!curr)) {
+			rcu_read_unlock();
+			*dst = *src;
+			return;
+		}
+
+		err = kcpustat_cpu_fetch_vtime(dst, src, curr, cpu);
+		rcu_read_unlock();
+
+		if (!err)
+			return;
+
+		cpu_relax();
+	}
+}
+EXPORT_SYMBOL_GPL(kcpustat_cpu_fetch);
+
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */
-- 
2.23.0

[tip: sched/core] sched/vtime: Bring up complete kcpustat accessor

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     74722bb223d0f236303b60c9509ff924a9713780
Gitweb:        https://git.kernel.org/tip/74722bb223d0f236303b60c9509ff924a9713780
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:26 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:33:24 +01:00

sched/vtime: Bring up complete kcpustat accessor

Many callsites want to fetch the values of system, user, user_nice, guest
or guest_nice kcpustat fields altogether or at least a pair of these.

In that case calling kcpustat_field() for each requested field brings
unecessary overhead when we could fetch all of them in a row.

So provide kcpustat_cpu_fetch() that fetches the whole kcpustat array
in a vtime safe way under the same RCU and seqcount block.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-3-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 include/linux/kernel_stat.h |   7 ++-
 kernel/sched/cputime.c      | 136 +++++++++++++++++++++++++++++------
 2 files changed, 123 insertions(+), 20 deletions(-)

diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 7978119..89f0745 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -81,12 +81,19 @@ static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
 extern u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 			  enum cpu_usage_stat usage, int cpu);
+extern void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu);
 #else
 static inline u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 				 enum cpu_usage_stat usage, int cpu)
 {
 	return kcpustat->cpustat[usage];
 }
+
+static inline void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
+{
+	*dst = kcpustat_cpu(cpu);
+}
+
 #endif
 
 extern void account_user_time(struct task_struct *, u64);
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 27b5406..d43318a 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -912,6 +912,30 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 }
 
+static int vtime_state_check(struct vtime *vtime, int cpu)
+{
+	/*
+	 * We raced against a context switch, fetch the
+	 * kcpustat task again.
+	 */
+	if (vtime->cpu != cpu && vtime->cpu != -1)
+		return -EAGAIN;
+
+	/*
+	 * Two possible things here:
+	 * 1) We are seeing the scheduling out task (prev) or any past one.
+	 * 2) We are seeing the scheduling in task (next) but it hasn't
+	 *    passed though vtime_task_switch() yet so the pending
+	 *    cputime of the prev task may not be flushed yet.
+	 *
+	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
+	 */
+	if (vtime->state == VTIME_INACTIVE)
+		return -EAGAIN;
+
+	return 0;
+}
+
 static u64 kcpustat_user_vtime(struct vtime *vtime)
 {
 	if (vtime->state == VTIME_USER)
@@ -933,26 +957,9 @@ static int kcpustat_field_vtime(u64 *cpustat,
 	do {
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		/*
-		 * We raced against context switch, fetch the
-		 * kcpustat task again.
-		 */
-		if (vtime->cpu != cpu && vtime->cpu != -1)
-			return -EAGAIN;
-
-		/*
-		 * Two possible things here:
-		 * 1) We are seeing the scheduling out task (prev) or any past one.
-		 * 2) We are seeing the scheduling in task (next) but it hasn't
-		 *    passed though vtime_task_switch() yet so the pending
-		 *    cputime of the prev task may not be flushed yet.
-		 *
-		 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
-		 */
-		if (vtime->state == VTIME_INACTIVE)
-			return -EAGAIN;
-
-		err = 0;
+		err = vtime_state_check(vtime, cpu);
+		if (err < 0)
+			return err;
 
 		*val = cpustat[usage];
 
@@ -1025,4 +1032,93 @@ u64 kcpustat_field(struct kernel_cpustat *kcpustat,
 	}
 }
 EXPORT_SYMBOL_GPL(kcpustat_field);
+
+static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
+				    const struct kernel_cpustat *src,
+				    struct task_struct *tsk, int cpu)
+{
+	struct vtime *vtime = &tsk->vtime;
+	unsigned int seq;
+	int err;
+
+	do {
+		u64 *cpustat;
+		u64 delta;
+
+		seq = read_seqcount_begin(&vtime->seqcount);
+
+		err = vtime_state_check(vtime, cpu);
+		if (err < 0)
+			return err;
+
+		*dst = *src;
+		cpustat = dst->cpustat;
+
+		/* Task is sleeping, dead or idle, nothing to add */
+		if (vtime->state < VTIME_SYS)
+			continue;
+
+		delta = vtime_delta(vtime);
+
+		/*
+		 * Task runs either in user (including guest) or kernel space,
+		 * add pending nohz time to the right place.
+		 */
+		if (vtime->state == VTIME_SYS) {
+			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
+		} else if (vtime->state == VTIME_USER) {
+			if (task_nice(tsk) > 0)
+				cpustat[CPUTIME_NICE] += vtime->utime + delta;
+			else
+				cpustat[CPUTIME_USER] += vtime->utime + delta;
+		} else {
+			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
+			if (task_nice(tsk) > 0) {
+				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
+				cpustat[CPUTIME_NICE] += vtime->gtime + delta;
+			} else {
+				cpustat[CPUTIME_GUEST] += vtime->gtime + delta;
+				cpustat[CPUTIME_USER] += vtime->gtime + delta;
+			}
+		}
+	} while (read_seqcount_retry(&vtime->seqcount, seq));
+
+	return err;
+}
+
+void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
+{
+	const struct kernel_cpustat *src = &kcpustat_cpu(cpu);
+	struct rq *rq;
+	int err;
+
+	if (!vtime_accounting_enabled_cpu(cpu)) {
+		*dst = *src;
+		return;
+	}
+
+	rq = cpu_rq(cpu);
+
+	for (;;) {
+		struct task_struct *curr;
+
+		rcu_read_lock();
+		curr = rcu_dereference(rq->curr);
+		if (WARN_ON_ONCE(!curr)) {
+			rcu_read_unlock();
+			*dst = *src;
+			return;
+		}
+
+		err = kcpustat_cpu_fetch_vtime(dst, src, curr, cpu);
+		rcu_read_unlock();
+
+		if (!err)
+			return;
+
+		cpu_relax();
+	}
+}
+EXPORT_SYMBOL_GPL(kcpustat_cpu_fetch);
+
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */

Re: [PATCH 2/6] sched/vtime: Bring up complete kcpustat accessor

[Chris Wilson]

Quoting Frederic Weisbecker (2019-11-21 02:44:26)
> +static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
> +                                   const struct kernel_cpustat *src,
> +                                   struct task_struct *tsk, int cpu)
> +{
> +       struct vtime *vtime = &tsk->vtime;
> +       unsigned int seq;
> +       int err;
> +
> +       do {
> +               u64 *cpustat;
> +               u64 delta;
> +
> +               seq = read_seqcount_begin(&vtime->seqcount);
> +
> +               err = vtime_state_check(vtime, cpu);
> +               if (err < 0)
> +                       return err;
> +
> +               *dst = *src;
> +               cpustat = dst->cpustat;
> +
> +               /* Task is sleeping, dead or idle, nothing to add */
> +               if (vtime->state < VTIME_SYS)
> +                       continue;
> +
> +               delta = vtime_delta(vtime);
> +
> +               /*
> +                * Task runs either in user (including guest) or kernel space,
> +                * add pending nohz time to the right place.
> +                */
> +               if (vtime->state == VTIME_SYS) {
> +                       cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
> +               } else if (vtime->state == VTIME_USER) {
> +                       if (task_nice(tsk) > 0)
> +                               cpustat[CPUTIME_NICE] += vtime->utime + delta;
> +                       else
> +                               cpustat[CPUTIME_USER] += vtime->utime + delta;
> +               } else {
> +                       WARN_ON_ONCE(vtime->state != VTIME_GUEST);

I'm randomly hitting this WARN on a non-virtualised system reading
/proc/stat.

vtime->state is updated under the write_seqcount, so the access here is
deliberately racey, and the change in vtime->state would be picked up
the seqcount_retry.

Quick suggestion would be something along the lines of

 static int vtime_state_check(struct vtime *vtime, int cpu)
 {
+	int state = READ_ONCE(vtime->state);
+
 	/*
 	 * We raced against a context switch, fetch the
 	 * kcpustat task again.
@@ -930,10 +932,10 @@ static int vtime_state_check(struct vtime *vtime, int cpu)
 	 *
 	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
 	 */
-	if (vtime->state == VTIME_INACTIVE)
+	if (state == VTIME_INACTIVE)
 		return -EAGAIN;

-	return 0;
+	return state;
 }

 static u64 kcpustat_user_vtime(struct vtime *vtime)
@@ -1055,7 +1057,7 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		cpustat = dst->cpustat;

 		/* Task is sleeping, dead or idle, nothing to add */
-		if (vtime->state < VTIME_SYS)
+		if (err < VTIME_SYS)
 			continue;

 		delta = vtime_delta(vtime);
@@ -1064,15 +1066,15 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		 * Task runs either in user (including guest) or kernel space,
 		 * add pending nohz time to the right place.
 		 */
-		if (vtime->state == VTIME_SYS) {
+		if (err == VTIME_SYS) {
 			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
-		} else if (vtime->state == VTIME_USER) {
+		} else if (err == VTIME_USER) {
 			if (task_nice(tsk) > 0)
 				cpustat[CPUTIME_NICE] += vtime->utime + delta;
 			else
 				cpustat[CPUTIME_USER] += vtime->utime + delta;
 		} else {
-			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
+			WARN_ON_ONCE(err != VTIME_GUEST);
 			if (task_nice(tsk) > 0) {
 				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
 				cpustat[CPUTIME_NICE] += vtime->gtime + delta;

Or drop the warn.
-Chris

Re: [PATCH 2/6] sched/vtime: Bring up complete kcpustat accessor

[Frederic Weisbecker]

On Sat, Dec 28, 2019 at 08:56:19PM +0000, Chris Wilson wrote:
> I'm randomly hitting this WARN on a non-virtualised system reading
> /proc/stat.
> 
> vtime->state is updated under the write_seqcount, so the access here is
> deliberately racey, and the change in vtime->state would be picked up
> the seqcount_retry.
> 
> Quick suggestion would be something along the lines of
> 
>  static int vtime_state_check(struct vtime *vtime, int cpu)
>  {
> +	int state = READ_ONCE(vtime->state);
> +
>  	/*
>  	 * We raced against a context switch, fetch the
>  	 * kcpustat task again.
> @@ -930,10 +932,10 @@ static int vtime_state_check(struct vtime *vtime, int cpu)
>  	 *
>  	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
>  	 */
> -	if (vtime->state == VTIME_INACTIVE)
> +	if (state == VTIME_INACTIVE)
>  		return -EAGAIN;
> 
> -	return 0;
> +	return state;
>  }
> 
>  static u64 kcpustat_user_vtime(struct vtime *vtime)
> @@ -1055,7 +1057,7 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
>  		cpustat = dst->cpustat;
> 
>  		/* Task is sleeping, dead or idle, nothing to add */
> -		if (vtime->state < VTIME_SYS)
> +		if (err < VTIME_SYS)
>  			continue;
> 
>  		delta = vtime_delta(vtime);
> @@ -1064,15 +1066,15 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
>  		 * Task runs either in user (including guest) or kernel space,
>  		 * add pending nohz time to the right place.
>  		 */
> -		if (vtime->state == VTIME_SYS) {
> +		if (err == VTIME_SYS) {
>  			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
> -		} else if (vtime->state == VTIME_USER) {
> +		} else if (err == VTIME_USER) {
>  			if (task_nice(tsk) > 0)
>  				cpustat[CPUTIME_NICE] += vtime->utime + delta;
>  			else
>  				cpustat[CPUTIME_USER] += vtime->utime + delta;
>  		} else {
> -			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
> +			WARN_ON_ONCE(err != VTIME_GUEST);
>  			if (task_nice(tsk) > 0) {
>  				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
>  				cpustat[CPUTIME_NICE] += vtime->gtime + delta;
> 
> Or drop the warn.

Good catch, can I use your Signed-off-by ?

Thanks.

[PATCH] sched/vtime: Prevent unstable evaluation of WARN(vtime->state)

[Chris Wilson]

As the vtime is sampled under loose seqcount protection by kcpustat, the
vtime fields may change as the code flows. Where logic dictates a field
has a static value, use a READ_ONCE.

Fixes: 74722bb223d0 ("sched/vtime: Bring up complete kcpustat accessor")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
---
 kernel/sched/cputime.c | 39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index d43318a489f2..96bbd52f43ae 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -914,6 +914,8 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 
 static int vtime_state_check(struct vtime *vtime, int cpu)
 {
+	int state = READ_ONCE(vtime->state);
+
 	/*
 	 * We raced against a context switch, fetch the
 	 * kcpustat task again.
@@ -930,10 +932,10 @@ static int vtime_state_check(struct vtime *vtime, int cpu)
 	 *
 	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
 	 */
-	if (vtime->state == VTIME_INACTIVE)
+	if (state == VTIME_INACTIVE)
 		return -EAGAIN;
 
-	return 0;
+	return state;
 }
 
 static u64 kcpustat_user_vtime(struct vtime *vtime)
@@ -952,14 +954,15 @@ static int kcpustat_field_vtime(u64 *cpustat,
 {
 	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
-	int err;
 
 	do {
+		int state;
+
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		err = vtime_state_check(vtime, cpu);
-		if (err < 0)
-			return err;
+		state = vtime_state_check(vtime, cpu);
+		if (state < 0)
+			return state;
 
 		*val = cpustat[usage];
 
@@ -972,7 +975,7 @@ static int kcpustat_field_vtime(u64 *cpustat,
 		 */
 		switch (usage) {
 		case CPUTIME_SYSTEM:
-			if (vtime->state == VTIME_SYS)
+			if (state == VTIME_SYS)
 				*val += vtime->stime + vtime_delta(vtime);
 			break;
 		case CPUTIME_USER:
@@ -984,11 +987,11 @@ static int kcpustat_field_vtime(u64 *cpustat,
 				*val += kcpustat_user_vtime(vtime);
 			break;
 		case CPUTIME_GUEST:
-			if (vtime->state == VTIME_GUEST && task_nice(tsk) <= 0)
+			if (state == VTIME_GUEST && task_nice(tsk) <= 0)
 				*val += vtime->gtime + vtime_delta(vtime);
 			break;
 		case CPUTIME_GUEST_NICE:
-			if (vtime->state == VTIME_GUEST && task_nice(tsk) > 0)
+			if (state == VTIME_GUEST && task_nice(tsk) > 0)
 				*val += vtime->gtime + vtime_delta(vtime);
 			break;
 		default:
@@ -1039,23 +1042,23 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 {
 	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
-	int err;
 
 	do {
 		u64 *cpustat;
 		u64 delta;
+		int state;
 
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		err = vtime_state_check(vtime, cpu);
-		if (err < 0)
-			return err;
+		state = vtime_state_check(vtime, cpu);
+		if (state < 0)
+			return state;
 
 		*dst = *src;
 		cpustat = dst->cpustat;
 
 		/* Task is sleeping, dead or idle, nothing to add */
-		if (vtime->state < VTIME_SYS)
+		if (state < VTIME_SYS)
 			continue;
 
 		delta = vtime_delta(vtime);
@@ -1064,15 +1067,15 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		 * Task runs either in user (including guest) or kernel space,
 		 * add pending nohz time to the right place.
 		 */
-		if (vtime->state == VTIME_SYS) {
+		if (state == VTIME_SYS) {
 			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
-		} else if (vtime->state == VTIME_USER) {
+		} else if (state == VTIME_USER) {
 			if (task_nice(tsk) > 0)
 				cpustat[CPUTIME_NICE] += vtime->utime + delta;
 			else
 				cpustat[CPUTIME_USER] += vtime->utime + delta;
 		} else {
-			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
+			WARN_ON_ONCE(state != VTIME_GUEST);
 			if (task_nice(tsk) > 0) {
 				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
 				cpustat[CPUTIME_NICE] += vtime->gtime + delta;
@@ -1083,7 +1086,7 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		}
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 
-	return err;
+	return 0;
 }
 
 void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
-- 
2.25.0.rc0

Re: [PATCH] sched/vtime: Prevent unstable evaluation of WARN(vtime->state)

[Frederic Weisbecker]

On Mon, Dec 30, 2019 at 09:04:36AM +0000, Chris Wilson wrote:
> As the vtime is sampled under loose seqcount protection by kcpustat, the
> vtime fields may change as the code flows. Where logic dictates a field
> has a static value, use a READ_ONCE.
> 
> Fixes: 74722bb223d0 ("sched/vtime: Bring up complete kcpustat accessor")
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Frederic Weisbecker <frederic@kernel.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Ingo Molnar <mingo@kernel.org>

Oh thanks for taking the time to make it a proper patch!
Looks good, I'm relaying it.

[PATCH 3/6] procfs: Use all-in-one vtime aware kcpustat accessor

[Frederic Weisbecker]

Now that we can read also user and guest time safely under vtime, use
the relevant accessor to fix frozen kcpustat values on nohz_full CPUs.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 fs/proc/stat.c | 54 ++++++++++++++++++++++++++++----------------------
 1 file changed, 30 insertions(+), 24 deletions(-)

diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 5c6bd0ae3802..37bdbec5b402 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -120,20 +120,23 @@ static int show_stat(struct seq_file *p, void *v)
 	getboottime64(&boottime);
 
 	for_each_possible_cpu(i) {
-		struct kernel_cpustat *kcs = &kcpustat_cpu(i);
+		struct kernel_cpustat kcpustat;
+		u64 *cpustat = kcpustat.cpustat;
 
-		user += kcs->cpustat[CPUTIME_USER];
-		nice += kcs->cpustat[CPUTIME_NICE];
-		system += kcpustat_field(kcs, CPUTIME_SYSTEM, i);
-		idle += get_idle_time(kcs, i);
-		iowait += get_iowait_time(kcs, i);
-		irq += kcs->cpustat[CPUTIME_IRQ];
-		softirq += kcs->cpustat[CPUTIME_SOFTIRQ];
-		steal += kcs->cpustat[CPUTIME_STEAL];
-		guest += kcs->cpustat[CPUTIME_GUEST];
-		guest_nice += kcs->cpustat[CPUTIME_GUEST_NICE];
-		sum += kstat_cpu_irqs_sum(i);
-		sum += arch_irq_stat_cpu(i);
+		kcpustat_cpu_fetch(&kcpustat, i);
+
+		user		+= cpustat[CPUTIME_USER];
+		nice		+= cpustat[CPUTIME_NICE];
+		system		+= cpustat[CPUTIME_SYSTEM];
+		idle		+= get_idle_time(&kcpustat, i);
+		iowait		+= get_iowait_time(&kcpustat, i);
+		irq		+= cpustat[CPUTIME_IRQ];
+		softirq		+= cpustat[CPUTIME_SOFTIRQ];
+		steal		+= cpustat[CPUTIME_STEAL];
+		guest		+= cpustat[CPUTIME_GUEST];
+		guest_nice	+= cpustat[CPUTIME_USER];
+		sum		+= kstat_cpu_irqs_sum(i);
+		sum		+= arch_irq_stat_cpu(i);
 
 		for (j = 0; j < NR_SOFTIRQS; j++) {
 			unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
@@ -157,19 +160,22 @@ static int show_stat(struct seq_file *p, void *v)
 	seq_putc(p, '\n');
 
 	for_each_online_cpu(i) {
-		struct kernel_cpustat *kcs = &kcpustat_cpu(i);
+		struct kernel_cpustat kcpustat;
+		u64 *cpustat = kcpustat.cpustat;
+
+		kcpustat_cpu_fetch(&kcpustat, i);
 
 		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
-		user = kcs->cpustat[CPUTIME_USER];
-		nice = kcs->cpustat[CPUTIME_NICE];
-		system = kcpustat_field(kcs, CPUTIME_SYSTEM, i);
-		idle = get_idle_time(kcs, i);
-		iowait = get_iowait_time(kcs, i);
-		irq = kcs->cpustat[CPUTIME_IRQ];
-		softirq = kcs->cpustat[CPUTIME_SOFTIRQ];
-		steal = kcs->cpustat[CPUTIME_STEAL];
-		guest = kcs->cpustat[CPUTIME_GUEST];
-		guest_nice = kcs->cpustat[CPUTIME_GUEST_NICE];
+		user		= cpustat[CPUTIME_USER];
+		nice		= cpustat[CPUTIME_NICE];
+		system		= cpustat[CPUTIME_SYSTEM];
+		idle		= get_idle_time(&kcpustat, i);
+		iowait		= get_iowait_time(&kcpustat, i);
+		irq		= cpustat[CPUTIME_IRQ];
+		softirq		= cpustat[CPUTIME_SOFTIRQ];
+		steal		= cpustat[CPUTIME_STEAL];
+		guest		= cpustat[CPUTIME_GUEST];
+		guest_nice	= cpustat[CPUTIME_USER];
 		seq_printf(p, "cpu%d", i);
 		seq_put_decimal_ull(p, " ", nsec_to_clock_t(user));
 		seq_put_decimal_ull(p, " ", nsec_to_clock_t(nice));
-- 
2.23.0

[tip: sched/core] procfs: Use all-in-one vtime aware kcpustat accessor

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     26dae145a76c3615588f263885904c6e567ff116
Gitweb:        https://git.kernel.org/tip/26dae145a76c3615588f263885904c6e567ff116
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:27 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:33:24 +01:00

procfs: Use all-in-one vtime aware kcpustat accessor

Now that we can read also user and guest time safely under vtime, use
the relevant accessor to fix frozen kcpustat values on nohz_full CPUs.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 fs/proc/stat.c | 56 +++++++++++++++++++++++++++----------------------
 1 file changed, 31 insertions(+), 25 deletions(-)

diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 5c6bd0a..37bdbec 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -120,20 +120,23 @@ static int show_stat(struct seq_file *p, void *v)
 	getboottime64(&boottime);
 
 	for_each_possible_cpu(i) {
-		struct kernel_cpustat *kcs = &kcpustat_cpu(i);
-
-		user += kcs->cpustat[CPUTIME_USER];
-		nice += kcs->cpustat[CPUTIME_NICE];
-		system += kcpustat_field(kcs, CPUTIME_SYSTEM, i);
-		idle += get_idle_time(kcs, i);
-		iowait += get_iowait_time(kcs, i);
-		irq += kcs->cpustat[CPUTIME_IRQ];
-		softirq += kcs->cpustat[CPUTIME_SOFTIRQ];
-		steal += kcs->cpustat[CPUTIME_STEAL];
-		guest += kcs->cpustat[CPUTIME_GUEST];
-		guest_nice += kcs->cpustat[CPUTIME_GUEST_NICE];
-		sum += kstat_cpu_irqs_sum(i);
-		sum += arch_irq_stat_cpu(i);
+		struct kernel_cpustat kcpustat;
+		u64 *cpustat = kcpustat.cpustat;
+
+		kcpustat_cpu_fetch(&kcpustat, i);
+
+		user		+= cpustat[CPUTIME_USER];
+		nice		+= cpustat[CPUTIME_NICE];
+		system		+= cpustat[CPUTIME_SYSTEM];
+		idle		+= get_idle_time(&kcpustat, i);
+		iowait		+= get_iowait_time(&kcpustat, i);
+		irq		+= cpustat[CPUTIME_IRQ];
+		softirq		+= cpustat[CPUTIME_SOFTIRQ];
+		steal		+= cpustat[CPUTIME_STEAL];
+		guest		+= cpustat[CPUTIME_GUEST];
+		guest_nice	+= cpustat[CPUTIME_USER];
+		sum		+= kstat_cpu_irqs_sum(i);
+		sum		+= arch_irq_stat_cpu(i);
 
 		for (j = 0; j < NR_SOFTIRQS; j++) {
 			unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
@@ -157,19 +160,22 @@ static int show_stat(struct seq_file *p, void *v)
 	seq_putc(p, '\n');
 
 	for_each_online_cpu(i) {
-		struct kernel_cpustat *kcs = &kcpustat_cpu(i);
+		struct kernel_cpustat kcpustat;
+		u64 *cpustat = kcpustat.cpustat;
+
+		kcpustat_cpu_fetch(&kcpustat, i);
 
 		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
-		user = kcs->cpustat[CPUTIME_USER];
-		nice = kcs->cpustat[CPUTIME_NICE];
-		system = kcpustat_field(kcs, CPUTIME_SYSTEM, i);
-		idle = get_idle_time(kcs, i);
-		iowait = get_iowait_time(kcs, i);
-		irq = kcs->cpustat[CPUTIME_IRQ];
-		softirq = kcs->cpustat[CPUTIME_SOFTIRQ];
-		steal = kcs->cpustat[CPUTIME_STEAL];
-		guest = kcs->cpustat[CPUTIME_GUEST];
-		guest_nice = kcs->cpustat[CPUTIME_GUEST_NICE];
+		user		= cpustat[CPUTIME_USER];
+		nice		= cpustat[CPUTIME_NICE];
+		system		= cpustat[CPUTIME_SYSTEM];
+		idle		= get_idle_time(&kcpustat, i);
+		iowait		= get_iowait_time(&kcpustat, i);
+		irq		= cpustat[CPUTIME_IRQ];
+		softirq		= cpustat[CPUTIME_SOFTIRQ];
+		steal		= cpustat[CPUTIME_STEAL];
+		guest		= cpustat[CPUTIME_GUEST];
+		guest_nice	= cpustat[CPUTIME_USER];
 		seq_printf(p, "cpu%d", i);
 		seq_put_decimal_ull(p, " ", nsec_to_clock_t(user));
 		seq_put_decimal_ull(p, " ", nsec_to_clock_t(nice));

Re: [PATCH 3/6] procfs: Use all-in-one vtime aware kcpustat accessor

[Paul Orlyk]

Looks like a copy-paste error. I think it should be:

- guest_nice	+= cpustat[CPUTIME_USER];
+ guest_nice	+= cpustat[CPUTIME_GUEST_NICE];

and

- guest_nice	= cpustat[CPUTIME_USER];
+ guest_nice	= cpustat[CPUTIME_GUEST_NICE];

With best regards,
Paul Orlyk

On 11/21/19 4:44 AM, Frederic Weisbecker wrote:
> +		guest		+= cpustat[CPUTIME_GUEST];
> +		guest_nice	+= cpustat[CPUTIME_USER];
> +		sum		+= kstat_cpu_irqs_sum(i);
> 
> +		guest		= cpustat[CPUTIME_GUEST];
> +		guest_nice	= cpustat[CPUTIME_USER];
>   		seq_printf(p, "cpu%d", i);

Re: [PATCH 3/6] procfs: Use all-in-one vtime aware kcpustat accessor

[Frederic Weisbecker]

On Sun, Dec 08, 2019 at 05:57:47PM +0200, Paul Orlyk wrote:
> Looks like a copy-paste error. I think it should be:
> 
> - guest_nice	+= cpustat[CPUTIME_USER];
> + guest_nice	+= cpustat[CPUTIME_GUEST_NICE];
> 
> and
> 
> - guest_nice	= cpustat[CPUTIME_USER];
> + guest_nice	= cpustat[CPUTIME_GUEST_NICE];
> 
> With best regards,
> Paul Orlyk

Yes the fix should be applied soonish:

https://lore.kernel.org/lkml/20191205020344.14940-1-frederic@kernel.org/

Thanks.

> 
> On 11/21/19 4:44 AM, Frederic Weisbecker wrote:
> > +		guest		+= cpustat[CPUTIME_GUEST];
> > +		guest_nice	+= cpustat[CPUTIME_USER];
> > +		sum		+= kstat_cpu_irqs_sum(i);
> > 
> > +		guest		= cpustat[CPUTIME_GUEST];
> > +		guest_nice	= cpustat[CPUTIME_USER];
> >   		seq_printf(p, "cpu%d", i);

[PATCH 4/6] cpufreq: Use vtime aware kcpustat accessors for user time

[Frederic Weisbecker]

We can now safely read user and guest kcpustat fields on nohz_full CPUs.
Use the appropriate accessors.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
---
 drivers/cpufreq/cpufreq.c          | 17 ++++++++++-------
 drivers/cpufreq/cpufreq_governor.c |  6 +++---
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 527fd068dc12..ee23eaf20f35 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -113,18 +113,21 @@ EXPORT_SYMBOL_GPL(get_governor_parent_kobj);
 
 static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
 {
-	u64 idle_time;
+	struct kernel_cpustat kcpustat;
 	u64 cur_wall_time;
+	u64 idle_time;
 	u64 busy_time;
 
 	cur_wall_time = jiffies64_to_nsecs(get_jiffies_64());
 
-	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_field(&kcpustat_cpu(cpu), CPUTIME_SYSTEM, cpu);
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+	kcpustat_cpu_fetch(&kcpustat, cpu);
+
+	busy_time = kcpustat.cpustat[CPUTIME_USER];
+	busy_time += kcpustat.cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat.cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat.cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat.cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat.cpustat[CPUTIME_NICE];
 
 	idle_time = cur_wall_time - busy_time;
 	if (wall)
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 4bb054d0cb43..f99ae45efaea 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -105,7 +105,7 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
 			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
 								  dbs_data->io_is_busy);
 			if (dbs_data->ignore_nice_load)
-				j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+				j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 		}
 	}
 }
@@ -149,7 +149,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 		j_cdbs->prev_cpu_idle = cur_idle_time;
 
 		if (ignore_nice) {
-			u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			u64 cur_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 
 			idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, NSEC_PER_USEC);
 			j_cdbs->prev_cpu_nice = cur_nice;
@@ -530,7 +530,7 @@ int cpufreq_dbs_governor_start(struct cpufreq_policy *policy)
 		j_cdbs->prev_load = 0;
 
 		if (ignore_nice)
-			j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 	}
 
 	gov->start(policy);
-- 
2.23.0

[tip: sched/core] cpufreq: Use vtime aware kcpustat accessors for user time

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     5720821ba1d845f0b91a9278137e9005c5f6931d
Gitweb:        https://git.kernel.org/tip/5720821ba1d845f0b91a9278137e9005c5f6931d
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:28 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:33:25 +01:00

cpufreq: Use vtime aware kcpustat accessors for user time

We can now safely read user and guest kcpustat fields on nohz_full CPUs.
Use the appropriate accessors.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-5-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 drivers/cpufreq/cpufreq.c          | 17 ++++++++++-------
 drivers/cpufreq/cpufreq_governor.c |  6 +++---
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 527fd06..ee23eaf 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -113,18 +113,21 @@ EXPORT_SYMBOL_GPL(get_governor_parent_kobj);
 
 static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
 {
-	u64 idle_time;
+	struct kernel_cpustat kcpustat;
 	u64 cur_wall_time;
+	u64 idle_time;
 	u64 busy_time;
 
 	cur_wall_time = jiffies64_to_nsecs(get_jiffies_64());
 
-	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_field(&kcpustat_cpu(cpu), CPUTIME_SYSTEM, cpu);
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+	kcpustat_cpu_fetch(&kcpustat, cpu);
+
+	busy_time = kcpustat.cpustat[CPUTIME_USER];
+	busy_time += kcpustat.cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat.cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat.cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat.cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat.cpustat[CPUTIME_NICE];
 
 	idle_time = cur_wall_time - busy_time;
 	if (wall)
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 4bb054d..f99ae45 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -105,7 +105,7 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
 			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
 								  dbs_data->io_is_busy);
 			if (dbs_data->ignore_nice_load)
-				j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+				j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 		}
 	}
 }
@@ -149,7 +149,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 		j_cdbs->prev_cpu_idle = cur_idle_time;
 
 		if (ignore_nice) {
-			u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			u64 cur_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 
 			idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, NSEC_PER_USEC);
 			j_cdbs->prev_cpu_nice = cur_nice;
@@ -530,7 +530,7 @@ int cpufreq_dbs_governor_start(struct cpufreq_policy *policy)
 		j_cdbs->prev_load = 0;
 
 		if (ignore_nice)
-			j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j);
 	}
 
 	gov->start(policy);

[PATCH 5/6] leds: Use all-in-one vtime aware kcpustat accessor

[Frederic Weisbecker]

We can now safely read user kcpustat fields on nohz_full CPUs.
Use the appropriate accessor.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 drivers/leds/trigger/ledtrig-activity.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
index ddfc5edd07c8..6901e3631c22 100644
--- a/drivers/leds/trigger/ledtrig-activity.c
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -57,11 +57,15 @@ static void led_activity_function(struct timer_list *t)
 	curr_used = 0;
 
 	for_each_possible_cpu(i) {
-		curr_used += kcpustat_cpu(i).cpustat[CPUTIME_USER]
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_NICE]
-			  +  kcpustat_field(&kcpustat_cpu(i), CPUTIME_SYSTEM, i)
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
+		struct kernel_cpustat kcpustat;
+
+		kcpustat_fetch_cpu(&kcpustat, i);
+
+		curr_used += kcpustat.cpustat[CPUTIME_USER]
+			  +  kcpustat.cpustat[CPUTIME_NICE]
+			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
+			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
+			  +  kcpustat.cpustat[CPUTIME_IRQ];
 		cpus++;
 	}
 
-- 
2.23.0

Re: [PATCH 5/6] leds: Use all-in-one vtime aware kcpustat accessor

[Ingo Molnar]

* Frederic Weisbecker <frederic@kernel.org> wrote:

> We can now safely read user kcpustat fields on nohz_full CPUs.
> Use the appropriate accessor.
> 
> Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Rik van Riel <riel@surriel.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Wanpeng Li <wanpengli@tencent.com>
> Cc: Ingo Molnar <mingo@kernel.org>
> ---
>  drivers/leds/trigger/ledtrig-activity.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
> index ddfc5edd07c8..6901e3631c22 100644
> --- a/drivers/leds/trigger/ledtrig-activity.c
> +++ b/drivers/leds/trigger/ledtrig-activity.c
> @@ -57,11 +57,15 @@ static void led_activity_function(struct timer_list *t)
>  	curr_used = 0;
>  
>  	for_each_possible_cpu(i) {
> -		curr_used += kcpustat_cpu(i).cpustat[CPUTIME_USER]
> -			  +  kcpustat_cpu(i).cpustat[CPUTIME_NICE]
> -			  +  kcpustat_field(&kcpustat_cpu(i), CPUTIME_SYSTEM, i)
> -			  +  kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]
> -			  +  kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> +		struct kernel_cpustat kcpustat;
> +
> +		kcpustat_fetch_cpu(&kcpustat, i);
> +
> +		curr_used += kcpustat.cpustat[CPUTIME_USER]
> +			  +  kcpustat.cpustat[CPUTIME_NICE]
> +			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
> +			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
> +			  +  kcpustat.cpustat[CPUTIME_IRQ];

Not the best tested series:

--- a/drivers/leds/trigger/ledtrig-activity.c
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -59,7 +59,7 @@ static void led_activity_function(struct timer_list *t)
 	for_each_possible_cpu(i) {
 		struct kernel_cpustat kcpustat;
 
-		kcpustat_fetch_cpu(&kcpustat, i);
+		kcpustat_cpu_fetch(&kcpustat, i);
 
 		curr_used += kcpustat.cpustat[CPUTIME_USER]
 			  +  kcpustat.cpustat[CPUTIME_NICE]


:-)

Thanks,

	Ingo

Re: [PATCH 5/6] leds: Use all-in-one vtime aware kcpustat accessor

[Frederic Weisbecker]

On Thu, Nov 21, 2019 at 07:58:26AM +0100, Ingo Molnar wrote:
> 
> * Frederic Weisbecker <frederic@kernel.org> wrote:
> 
> > We can now safely read user kcpustat fields on nohz_full CPUs.
> > Use the appropriate accessor.
> > 
> > Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> > Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
> > Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> > Cc: Pavel Machek <pavel@ucw.cz>
> > Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Rik van Riel <riel@surriel.com>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: Wanpeng Li <wanpengli@tencent.com>
> > Cc: Ingo Molnar <mingo@kernel.org>
> > ---
> >  drivers/leds/trigger/ledtrig-activity.c | 14 +++++++++-----
> >  1 file changed, 9 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
> > index ddfc5edd07c8..6901e3631c22 100644
> > --- a/drivers/leds/trigger/ledtrig-activity.c
> > +++ b/drivers/leds/trigger/ledtrig-activity.c
> > @@ -57,11 +57,15 @@ static void led_activity_function(struct timer_list *t)
> >  	curr_used = 0;
> >  
> >  	for_each_possible_cpu(i) {
> > -		curr_used += kcpustat_cpu(i).cpustat[CPUTIME_USER]
> > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_NICE]
> > -			  +  kcpustat_field(&kcpustat_cpu(i), CPUTIME_SYSTEM, i)
> > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]
> > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> > +		struct kernel_cpustat kcpustat;
> > +
> > +		kcpustat_fetch_cpu(&kcpustat, i);
> > +
> > +		curr_used += kcpustat.cpustat[CPUTIME_USER]
> > +			  +  kcpustat.cpustat[CPUTIME_NICE]
> > +			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
> > +			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
> > +			  +  kcpustat.cpustat[CPUTIME_IRQ];
> 
> Not the best tested series:
> 
> --- a/drivers/leds/trigger/ledtrig-activity.c
> +++ b/drivers/leds/trigger/ledtrig-activity.c
> @@ -59,7 +59,7 @@ static void led_activity_function(struct timer_list *t)
>  	for_each_possible_cpu(i) {
>  		struct kernel_cpustat kcpustat;
>  
> -		kcpustat_fetch_cpu(&kcpustat, i);
> +		kcpustat_cpu_fetch(&kcpustat, i);
>  
>  		curr_used += kcpustat.cpustat[CPUTIME_USER]
>  			  +  kcpustat.cpustat[CPUTIME_NICE]
> 
> 
> :-)

Oops, I tested with vtime on and off but that one slipped under my config.
Do you want me to resend?

Thanks.

Re: [PATCH 5/6] leds: Use all-in-one vtime aware kcpustat accessor

[Ingo Molnar]

* Frederic Weisbecker <frederic@kernel.org> wrote:

> On Thu, Nov 21, 2019 at 07:58:26AM +0100, Ingo Molnar wrote:
> > 
> > * Frederic Weisbecker <frederic@kernel.org> wrote:
> > 
> > > We can now safely read user kcpustat fields on nohz_full CPUs.
> > > Use the appropriate accessor.
> > > 
> > > Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> > > Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
> > > Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> > > Cc: Pavel Machek <pavel@ucw.cz>
> > > Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
> > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > Cc: Rik van Riel <riel@surriel.com>
> > > Cc: Peter Zijlstra <peterz@infradead.org>
> > > Cc: Wanpeng Li <wanpengli@tencent.com>
> > > Cc: Ingo Molnar <mingo@kernel.org>
> > > ---
> > >  drivers/leds/trigger/ledtrig-activity.c | 14 +++++++++-----
> > >  1 file changed, 9 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
> > > index ddfc5edd07c8..6901e3631c22 100644
> > > --- a/drivers/leds/trigger/ledtrig-activity.c
> > > +++ b/drivers/leds/trigger/ledtrig-activity.c
> > > @@ -57,11 +57,15 @@ static void led_activity_function(struct timer_list *t)
> > >  	curr_used = 0;
> > >  
> > >  	for_each_possible_cpu(i) {
> > > -		curr_used += kcpustat_cpu(i).cpustat[CPUTIME_USER]
> > > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_NICE]
> > > -			  +  kcpustat_field(&kcpustat_cpu(i), CPUTIME_SYSTEM, i)
> > > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]
> > > -			  +  kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> > > +		struct kernel_cpustat kcpustat;
> > > +
> > > +		kcpustat_fetch_cpu(&kcpustat, i);
> > > +
> > > +		curr_used += kcpustat.cpustat[CPUTIME_USER]
> > > +			  +  kcpustat.cpustat[CPUTIME_NICE]
> > > +			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
> > > +			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
> > > +			  +  kcpustat.cpustat[CPUTIME_IRQ];
> > 
> > Not the best tested series:
> > 
> > --- a/drivers/leds/trigger/ledtrig-activity.c
> > +++ b/drivers/leds/trigger/ledtrig-activity.c
> > @@ -59,7 +59,7 @@ static void led_activity_function(struct timer_list *t)
> >  	for_each_possible_cpu(i) {
> >  		struct kernel_cpustat kcpustat;
> >  
> > -		kcpustat_fetch_cpu(&kcpustat, i);
> > +		kcpustat_cpu_fetch(&kcpustat, i);
> >  
> >  		curr_used += kcpustat.cpustat[CPUTIME_USER]
> >  			  +  kcpustat.cpustat[CPUTIME_NICE]
> > 
> > 
> > :-)
> 
> Oops, I tested with vtime on and off but that one slipped under my config.
> Do you want me to resend?

No need, I suspect this slipped in via my last minute request for that 
interface cleanup - so I just applied the fix and tested it - it all 
passed testing today and I just pushed it out into tip:sched/core.

So all's good so far.

Thanks Frederic!

	Ingo

[tip: sched/core] leds: Use all-in-one vtime aware kcpustat accessor

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     8688f2fb671b2ed59b1b16083136b6edc3750435
Gitweb:        https://git.kernel.org/tip/8688f2fb671b2ed59b1b16083136b6edc3750435
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:29 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:58:48 +01:00

leds: Use all-in-one vtime aware kcpustat accessor

We can now safely read user kcpustat fields on nohz_full CPUs.
Use the appropriate accessor.

[ mingo: Fixed build failure. ]

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> (maintainer:LED SUBSYSTEM)
Cc: Pavel Machek <pavel@ucw.cz> (maintainer:LED SUBSYSTEM)
Cc: Dan Murphy <dmurphy@ti.com> (reviewer:LED SUBSYSTEM)
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-6-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 drivers/leds/trigger/ledtrig-activity.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
index ddfc5ed..14ba7fa 100644
--- a/drivers/leds/trigger/ledtrig-activity.c
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -57,11 +57,15 @@ static void led_activity_function(struct timer_list *t)
 	curr_used = 0;
 
 	for_each_possible_cpu(i) {
-		curr_used += kcpustat_cpu(i).cpustat[CPUTIME_USER]
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_NICE]
-			  +  kcpustat_field(&kcpustat_cpu(i), CPUTIME_SYSTEM, i)
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]
-			  +  kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
+		struct kernel_cpustat kcpustat;
+
+		kcpustat_cpu_fetch(&kcpustat, i);
+
+		curr_used += kcpustat.cpustat[CPUTIME_USER]
+			  +  kcpustat.cpustat[CPUTIME_NICE]
+			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
+			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
+			  +  kcpustat.cpustat[CPUTIME_IRQ];
 		cpus++;
 	}
 

[PATCH 6/6] rackmeter: Use vtime aware kcpustat accessor

[Frederic Weisbecker]

Now that we have a vtime safe kcpustat accessor, use it to fetch
CPUTIME_NICE and fix frozen kcpustat values on nohz_full CPUs.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 drivers/macintosh/rack-meter.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 4134e580f786..60311e8d6240 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -81,13 +81,14 @@ static int rackmeter_ignore_nice;
  */
 static inline u64 get_cpu_idle_time(unsigned int cpu)
 {
+	struct kernel_cpustat *kcpustat = &kcpustat_cpu(cpu);
 	u64 retval;
 
-	retval = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE] +
-		 kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
+	retval = kcpustat->cpustat[CPUTIME_IDLE] +
+		 kcpustat->cpustat[CPUTIME_IOWAIT];
 
 	if (rackmeter_ignore_nice)
-		retval += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+		retval += kcpustat_field(kcpustat, CPUTIME_NICE, cpu);
 
 	return retval;
 }
-- 
2.23.0

[tip: sched/core] rackmeter: Use vtime aware kcpustat accessor

[tip-bot2 for Frederic Weisbecker]

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     8392853e964c025b0616bd54c0cdf9cbc3c9a769
Gitweb:        https://git.kernel.org/tip/8392853e964c025b0616bd54c0cdf9cbc3c9a769
Author:        Frederic Weisbecker <frederic@kernel.org>
AuthorDate:    Thu, 21 Nov 2019 03:44:30 +01:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 21 Nov 2019 07:59:00 +01:00

rackmeter: Use vtime aware kcpustat accessor

Now that we have a vtime safe kcpustat accessor, use it to fetch
CPUTIME_NICE and fix frozen kcpustat values on nohz_full CPUs.

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-7-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 drivers/macintosh/rack-meter.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 4134e58..60311e8 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -81,13 +81,14 @@ static int rackmeter_ignore_nice;
  */
 static inline u64 get_cpu_idle_time(unsigned int cpu)
 {
+	struct kernel_cpustat *kcpustat = &kcpustat_cpu(cpu);
 	u64 retval;
 
-	retval = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE] +
-		 kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
+	retval = kcpustat->cpustat[CPUTIME_IDLE] +
+		 kcpustat->cpustat[CPUTIME_IOWAIT];
 
 	if (rackmeter_ignore_nice)
-		retval += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+		retval += kcpustat_field(kcpustat, CPUTIME_NICE, cpu);
 
 	return retval;
 }