All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Durrant <pdurrant@amazon.com>
To: <xen-devel@lists.xenproject.org>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: "Paul Durrant" <pdurrant@amazon.com>,
	"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Jens Axboe" <axboe@kernel.dk>
Subject: [PATCH] xen-blkback: allow module to be cleanly unloaded
Date: Fri, 29 Nov 2019 11:31:31 +0000	[thread overview]
Message-ID: <20191129113131.1954-1-pdurrant@amazon.com> (raw)

Add a module_exit() to perform the necessary clean-up. Also add
__module_get() and module_put() calls into xen_blkif_alloc() and
xen_blkif_free() respectively to make sure an in-use module cannot be
unloaded.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
---
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
---
 drivers/block/xen-blkback/blkback.c |  8 ++++++++
 drivers/block/xen-blkback/common.h  |  3 +++
 drivers/block/xen-blkback/xenbus.c  | 15 +++++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index fd1e19f1a49f..e562a7e20c3c 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -1504,5 +1504,13 @@ static int __init xen_blkif_init(void)
 
 module_init(xen_blkif_init);
 
+static void __exit xen_blkif_fini(void)
+{
+	xen_blkif_xenbus_fini();
+	xen_blkif_interface_fini();
+}
+
+module_exit(xen_blkif_fini);
+
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("xen-backend:vbd");
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 1d3002d773f7..49132b0adbbe 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -375,9 +375,12 @@ struct phys_req {
 	struct block_device	*bdev;
 	blkif_sector_t		sector_number;
 };
+
 int xen_blkif_interface_init(void);
+void xen_blkif_interface_fini(void);
 
 int xen_blkif_xenbus_init(void);
+void xen_blkif_xenbus_fini(void);
 
 irqreturn_t xen_blkif_be_int(int irq, void *dev_id);
 int xen_blkif_schedule(void *arg);
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index b90dbcd99c03..f948584fcf66 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -173,6 +173,8 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid)
 	init_completion(&blkif->drain_complete);
 	INIT_WORK(&blkif->free_work, xen_blkif_deferred_free);
 
+	__module_get(THIS_MODULE);
+
 	return blkif;
 }
 
@@ -320,6 +322,8 @@ static void xen_blkif_free(struct xen_blkif *blkif)
 
 	/* Make sure everything is drained before shutting down */
 	kmem_cache_free(xen_blkif_cachep, blkif);
+
+	module_put(THIS_MODULE);
 }
 
 int __init xen_blkif_interface_init(void)
@@ -333,6 +337,12 @@ int __init xen_blkif_interface_init(void)
 	return 0;
 }
 
+void xen_blkif_interface_fini(void)
+{
+	kmem_cache_destroy(xen_blkif_cachep);
+	xen_blkif_cachep = NULL;
+}
+
 /*
  *  sysfs interface for VBD I/O requests
  */
@@ -1122,3 +1132,8 @@ int xen_blkif_xenbus_init(void)
 {
 	return xenbus_register_backend(&xen_blkbk_driver);
 }
+
+void xen_blkif_xenbus_fini(void)
+{
+	xenbus_unregister_driver(&xen_blkbk_driver);
+}
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Paul Durrant <pdurrant@amazon.com>
To: <xen-devel@lists.xenproject.org>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: "Jens Axboe" <axboe@kernel.dk>,
	"Paul Durrant" <pdurrant@amazon.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Subject: [Xen-devel] [PATCH] xen-blkback: allow module to be cleanly unloaded
Date: Fri, 29 Nov 2019 11:31:31 +0000	[thread overview]
Message-ID: <20191129113131.1954-1-pdurrant@amazon.com> (raw)

Add a module_exit() to perform the necessary clean-up. Also add
__module_get() and module_put() calls into xen_blkif_alloc() and
xen_blkif_free() respectively to make sure an in-use module cannot be
unloaded.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
---
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
---
 drivers/block/xen-blkback/blkback.c |  8 ++++++++
 drivers/block/xen-blkback/common.h  |  3 +++
 drivers/block/xen-blkback/xenbus.c  | 15 +++++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index fd1e19f1a49f..e562a7e20c3c 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -1504,5 +1504,13 @@ static int __init xen_blkif_init(void)
 
 module_init(xen_blkif_init);
 
+static void __exit xen_blkif_fini(void)
+{
+	xen_blkif_xenbus_fini();
+	xen_blkif_interface_fini();
+}
+
+module_exit(xen_blkif_fini);
+
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("xen-backend:vbd");
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 1d3002d773f7..49132b0adbbe 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -375,9 +375,12 @@ struct phys_req {
 	struct block_device	*bdev;
 	blkif_sector_t		sector_number;
 };
+
 int xen_blkif_interface_init(void);
+void xen_blkif_interface_fini(void);
 
 int xen_blkif_xenbus_init(void);
+void xen_blkif_xenbus_fini(void);
 
 irqreturn_t xen_blkif_be_int(int irq, void *dev_id);
 int xen_blkif_schedule(void *arg);
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index b90dbcd99c03..f948584fcf66 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -173,6 +173,8 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid)
 	init_completion(&blkif->drain_complete);
 	INIT_WORK(&blkif->free_work, xen_blkif_deferred_free);
 
+	__module_get(THIS_MODULE);
+
 	return blkif;
 }
 
@@ -320,6 +322,8 @@ static void xen_blkif_free(struct xen_blkif *blkif)
 
 	/* Make sure everything is drained before shutting down */
 	kmem_cache_free(xen_blkif_cachep, blkif);
+
+	module_put(THIS_MODULE);
 }
 
 int __init xen_blkif_interface_init(void)
@@ -333,6 +337,12 @@ int __init xen_blkif_interface_init(void)
 	return 0;
 }
 
+void xen_blkif_interface_fini(void)
+{
+	kmem_cache_destroy(xen_blkif_cachep);
+	xen_blkif_cachep = NULL;
+}
+
 /*
  *  sysfs interface for VBD I/O requests
  */
@@ -1122,3 +1132,8 @@ int xen_blkif_xenbus_init(void)
 {
 	return xenbus_register_backend(&xen_blkbk_driver);
 }
+
+void xen_blkif_xenbus_fini(void)
+{
+	xenbus_unregister_driver(&xen_blkbk_driver);
+}
-- 
2.20.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

             reply	other threads:[~2019-11-29 11:31 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29 11:31 Paul Durrant [this message]
2019-11-29 11:31 ` [Xen-devel] [PATCH] xen-blkback: allow module to be cleanly unloaded Paul Durrant
2019-11-29 11:56 ` Jan Beulich
2019-11-29 11:56   ` [Xen-devel] " Jan Beulich
2019-11-29 12:16   ` Durrant, Paul
2019-11-29 12:16     ` [Xen-devel] " Durrant, Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191129113131.1954-1-pdurrant@amazon.com \
    --to=pdurrant@amazon.com \
    --cc=axboe@kernel.dk \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roger.pau@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.