Re: [PATCH v2 3/3] bindings: iio: pressure: Add dlh-i2c documentation

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 29 Nov 2019 08:34:20 +0100
<tomislav.denis@avl.com> wrote:

> From: Tomislav Denis <tomislav.denis@avl.com>
> 
> Add a device tree binding documentation for DLH series pressure
> sensors.
> 
> Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Looks good to me, but I'll leave some time for others to take a look.

> ---
>  .../bindings/iio/pressure/asc,dlh-i2c.yaml         | 51 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml
> new file mode 100644
> index 0000000..5de2277
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/pressure/dlh-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: All Sensors DLH series low voltage digital pressure sensors
> +
> +maintainers:
> +  - Tomislav Denis <tomislav.denis@avl.com>
> +
> +description: |
> +  Bindings for the All Sensors DLH series pressure sensors.
> +
> +  Specifications about the sensors can be found at:
> +    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> +
> +properties:
> +  compatible:
> +    enum:
> +      - asc,dlhl60d
> +      - asc,dlhl60g
> +
> +  reg:
> +    description: I2C device address
> +    maxItems: 1
> +
> +  interrupts:
> +    description: interrupt mapping for EOC(data ready) pin
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c0 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      pressure@29 {
> +          compatible = "asc,dlhl60d";
> +          reg = <0x29>;
> +          interrupt-parent = <&gpio0>;
> +          interrupts = <10 IRQ_TYPE_EDGE_RISING>;
> +      };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 39d6f0f..8f0eab0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -674,6 +674,7 @@ W:	http://www.allsensors.com/
>  S:	Maintained
>  L:	linux-iio@vger.kernel.org
>  F:	drivers/iio/pressure/dlh-i2c.c
> +F:	Documentation/devicetree/bindings/iio/pressure/dlh-i2c.yaml
>  
>  ALLEGRO DVT VIDEO IP CORE DRIVER
>  M:	Michael Tretter <m.tretter@pengutronix.de>