From: Rob Herring <robh@kernel.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: mjourdan@baylibre.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: add bindings for G12A family
Date: Tue, 3 Dec 2019 17:21:09 -0600 [thread overview]
Message-ID: <20191203232108.GA361@bogus> (raw)
In-Reply-To: <20191120111430.29552-3-narmstrong@baylibre.com>
On Wed, Nov 20, 2019 at 12:14:28PM +0100, Neil Armstrong wrote:
> Add bindings to support the Amlogic Video Decoder on the Amlogic G12A
> family.
>
> For the G12A family, a supplementary clock is needed to operate the
> HEVC/VP9 decoder.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/media/amlogic,gx-vdec.yaml | 57 +++++++++++++++----
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 878944867d6e..8ea979bb97e6 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -27,12 +27,15 @@ description: |
>
> properties:
> compatible:
> - items:
> + oneOf:
> + - items:
> + - enum:
> + - amlogic,gxbb-vdec # GXBB (S905)
> + - amlogic,gxl-vdec # GXL (S905X, S905D)
> + - amlogic,gxm-vdec # GXM (S912)
> + - const: amlogic,gx-vdec
> - enum:
> - - amlogic,gxbb-vdec # GXBB (S905)
> - - amlogic,gxl-vdec # GXL (S905X, S905D)
> - - amlogic,gxm-vdec # GXM (S912)
> - - const: amlogic,gx-vdec
> + - amlogic,g12a-vdec # G12A (S905X2, S905D2)
>
> interrupts:
> minItems: 2
> @@ -59,13 +62,9 @@ properties:
>
> clocks:
> minItems: 4
> + maxItems: 5
>
> - clock-names:
> - items:
> - - const: dos_parser
> - - const: dos
> - - const: vdec_1
> - - const: vdec_hevc
You can leave this here and add the 5th clock along with { minItems: 4,
maxItems: 5 }.
Then the 'if' schema just needs a 'maxItems: 4'.
> + clock-names: true
>
> amlogic,ao-sysctrl:
> description: should point to the AOBUS sysctrl node
> @@ -77,6 +76,42 @@ properties:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/phandle
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,gx-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 4
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,g12a-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 5
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> + - const: vdec_hevcf
> +
> required:
> - compatible
> - reg
> --
> 2.22.0
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: mjourdan@baylibre.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: add bindings for G12A family
Date: Tue, 3 Dec 2019 17:21:09 -0600 [thread overview]
Message-ID: <20191203232108.GA361@bogus> (raw)
In-Reply-To: <20191120111430.29552-3-narmstrong@baylibre.com>
On Wed, Nov 20, 2019 at 12:14:28PM +0100, Neil Armstrong wrote:
> Add bindings to support the Amlogic Video Decoder on the Amlogic G12A
> family.
>
> For the G12A family, a supplementary clock is needed to operate the
> HEVC/VP9 decoder.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/media/amlogic,gx-vdec.yaml | 57 +++++++++++++++----
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 878944867d6e..8ea979bb97e6 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -27,12 +27,15 @@ description: |
>
> properties:
> compatible:
> - items:
> + oneOf:
> + - items:
> + - enum:
> + - amlogic,gxbb-vdec # GXBB (S905)
> + - amlogic,gxl-vdec # GXL (S905X, S905D)
> + - amlogic,gxm-vdec # GXM (S912)
> + - const: amlogic,gx-vdec
> - enum:
> - - amlogic,gxbb-vdec # GXBB (S905)
> - - amlogic,gxl-vdec # GXL (S905X, S905D)
> - - amlogic,gxm-vdec # GXM (S912)
> - - const: amlogic,gx-vdec
> + - amlogic,g12a-vdec # G12A (S905X2, S905D2)
>
> interrupts:
> minItems: 2
> @@ -59,13 +62,9 @@ properties:
>
> clocks:
> minItems: 4
> + maxItems: 5
>
> - clock-names:
> - items:
> - - const: dos_parser
> - - const: dos
> - - const: vdec_1
> - - const: vdec_hevc
You can leave this here and add the 5th clock along with { minItems: 4,
maxItems: 5 }.
Then the 'if' schema just needs a 'maxItems: 4'.
> + clock-names: true
>
> amlogic,ao-sysctrl:
> description: should point to the AOBUS sysctrl node
> @@ -77,6 +76,42 @@ properties:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/phandle
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,gx-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 4
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,g12a-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 5
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> + - const: vdec_hevcf
> +
> required:
> - compatible
> - reg
> --
> 2.22.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: mjourdan@baylibre.com, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: add bindings for G12A family
Date: Tue, 3 Dec 2019 17:21:09 -0600 [thread overview]
Message-ID: <20191203232108.GA361@bogus> (raw)
In-Reply-To: <20191120111430.29552-3-narmstrong@baylibre.com>
On Wed, Nov 20, 2019 at 12:14:28PM +0100, Neil Armstrong wrote:
> Add bindings to support the Amlogic Video Decoder on the Amlogic G12A
> family.
>
> For the G12A family, a supplementary clock is needed to operate the
> HEVC/VP9 decoder.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/media/amlogic,gx-vdec.yaml | 57 +++++++++++++++----
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 878944867d6e..8ea979bb97e6 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -27,12 +27,15 @@ description: |
>
> properties:
> compatible:
> - items:
> + oneOf:
> + - items:
> + - enum:
> + - amlogic,gxbb-vdec # GXBB (S905)
> + - amlogic,gxl-vdec # GXL (S905X, S905D)
> + - amlogic,gxm-vdec # GXM (S912)
> + - const: amlogic,gx-vdec
> - enum:
> - - amlogic,gxbb-vdec # GXBB (S905)
> - - amlogic,gxl-vdec # GXL (S905X, S905D)
> - - amlogic,gxm-vdec # GXM (S912)
> - - const: amlogic,gx-vdec
> + - amlogic,g12a-vdec # G12A (S905X2, S905D2)
>
> interrupts:
> minItems: 2
> @@ -59,13 +62,9 @@ properties:
>
> clocks:
> minItems: 4
> + maxItems: 5
>
> - clock-names:
> - items:
> - - const: dos_parser
> - - const: dos
> - - const: vdec_1
> - - const: vdec_hevc
You can leave this here and add the 5th clock along with { minItems: 4,
maxItems: 5 }.
Then the 'if' schema just needs a 'maxItems: 4'.
> + clock-names: true
>
> amlogic,ao-sysctrl:
> description: should point to the AOBUS sysctrl node
> @@ -77,6 +76,42 @@ properties:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/phandle
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,gx-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 4
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,g12a-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 5
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> + - const: vdec_hevcf
> +
> required:
> - compatible
> - reg
> --
> 2.22.0
>
next prev parent reply other threads:[~2019-12-03 23:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 11:14 [PATCH 0/4] media: meson: vdec: add g12a platform Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-12-03 23:21 ` Rob Herring
2019-12-03 23:21 ` Rob Herring
2019-12-03 23:21 ` Rob Herring
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: add bindings for G12A family Neil Armstrong
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: " Neil Armstrong
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: " Neil Armstrong
2019-12-03 23:21 ` Rob Herring [this message]
2019-12-03 23:21 ` [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: " Rob Herring
2019-12-03 23:21 ` Rob Herring
2019-11-20 11:14 ` [PATCH 3/4] media: meson: vdec: add g12a platform Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` [PATCH 4/4] arm64: dts: meson-g12-common: add video decoder node Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` Neil Armstrong
2019-12-13 16:51 ` Kevin Hilman
2019-12-13 16:51 ` Kevin Hilman
2019-12-13 16:51 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191203232108.GA361@bogus \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mjourdan@baylibre.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.