From: Shawn Guo <shawnguo@kernel.org>
To: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Jon Nettleton <jon@solid-run.com>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Rabeeh Khoury <rabeeh@solid-run.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
Date: Wed, 11 Dec 2019 15:33:31 +0800 [thread overview]
Message-ID: <20191211073330.GO15858@dragon> (raw)
In-Reply-To: <E1ieHiP-0004wT-2O@rmk-PC.armlinux.org.uk>
On Mon, Dec 09, 2019 at 12:00:37PM +0000, Russell King wrote:
> Add MDIO descriptions to the lx2160a dtsi file, so we can use them in
> the SolidRun Clearfog CX platform.
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 0bd98f179bfa..617e1f1a2339 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -863,6 +863,26 @@
> fsl,extts-fifo;
> };
>
> + emdio1: mdio@8b96000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x00 0x8b96000 0x00 0x1000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + #address-cells = <0x01>;
> + #size-cells = <0x00>;
> + status = "disabled";
> + };
> +
> + emdio2: mdio@8b97000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x00 0x8b97000 0x00 0x1000>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + #address-cells = <0x01>;
> + #size-cells = <0x00>;
> + status = "disabled";
> + };
> +
Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately,
emdio2 was missing from there.
Shawn
[1] https://lkml.org/lkml/2019/12/4/675
> fsl_mc: fsl-mc@80c000000 {
> compatible = "fsl,qoriq-mc";
> reg = <0x00000008 0x0c000000 0 0x40>,
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jon Nettleton <jon@solid-run.com>,
Rabeeh Khoury <rabeeh@solid-run.com>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
Date: Wed, 11 Dec 2019 15:33:31 +0800 [thread overview]
Message-ID: <20191211073330.GO15858@dragon> (raw)
In-Reply-To: <E1ieHiP-0004wT-2O@rmk-PC.armlinux.org.uk>
On Mon, Dec 09, 2019 at 12:00:37PM +0000, Russell King wrote:
> Add MDIO descriptions to the lx2160a dtsi file, so we can use them in
> the SolidRun Clearfog CX platform.
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 0bd98f179bfa..617e1f1a2339 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -863,6 +863,26 @@
> fsl,extts-fifo;
> };
>
> + emdio1: mdio@8b96000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x00 0x8b96000 0x00 0x1000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + #address-cells = <0x01>;
> + #size-cells = <0x00>;
> + status = "disabled";
> + };
> +
> + emdio2: mdio@8b97000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x00 0x8b97000 0x00 0x1000>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + #address-cells = <0x01>;
> + #size-cells = <0x00>;
> + status = "disabled";
> + };
> +
Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately,
emdio2 was missing from there.
Shawn
[1] https://lkml.org/lkml/2019/12/4/675
> fsl_mc: fsl-mc@80c000000 {
> compatible = "fsl,qoriq-mc";
> reg = <0x00000008 0x0c000000 0 0x40>,
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-12-11 7:33 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 12:00 [PATCH 0/2] Add support for Solidrun CEX7 platforms Russell King - ARM Linux admin
2019-12-09 12:00 ` Russell King - ARM Linux admin
2019-12-09 12:00 ` [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions Russell King
2019-12-09 12:00 ` Russell King
2019-12-11 7:33 ` Shawn Guo [this message]
2019-12-11 7:33 ` Shawn Guo
2019-12-16 11:02 ` Russell King - ARM Linux admin
2019-12-16 11:02 ` Russell King - ARM Linux admin
2019-12-16 11:34 ` Russell King - ARM Linux admin
2019-12-16 11:34 ` Russell King - ARM Linux admin
2019-12-16 12:34 ` Russell King - ARM Linux admin
2019-12-16 12:34 ` Russell King - ARM Linux admin
2019-12-23 1:41 ` Shawn Guo
2019-12-23 1:41 ` Shawn Guo
2019-12-09 12:00 ` [PATCH 2/2] arm64: dts: lx2160a: add dts for CEX7 platforms Russell King
2019-12-09 12:00 ` Russell King
2019-12-11 7:40 ` Shawn Guo
2019-12-11 7:40 ` Shawn Guo
2019-12-16 11:01 ` Russell King - ARM Linux admin
2019-12-16 11:01 ` Russell King - ARM Linux admin
2019-12-23 2:19 ` Shawn Guo
2019-12-23 2:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211073330.GO15858@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jon@solid-run.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=rabeeh@solid-run.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.