From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Thomas Anderson <thomasanderson@google.com>
Cc: David Airlie <airlied@linux.ie>, Sean Pau <sean@poorly.run>,
linux-kernel@vger.kernel.org,
Bhawanpreet Lakha <Bhawanpreet.lakha@amd.com>,
dri-devel@lists.freedesktop.org,
Harry Wentland <hwentlan@amd.com>
Subject: Re: [PATCH] drm/edid: Increase size of VDB and CMDB bitmaps to 256 bits
Date: Wed, 11 Dec 2019 17:40:37 +0200 [thread overview]
Message-ID: <20191211154037.GI1208@intel.com> (raw)
In-Reply-To: <20191210221048.83628-1-thomasanderson@google.com>
On Tue, Dec 10, 2019 at 02:10:48PM -0800, Thomas Anderson wrote:
> CEA-861-G adds modes up to 219, so increase the size of the
> maps in preparation for adding the new modes to drm_edid.c.
>
> Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Thanks. lgtm. Pushed to drm-misc-next.
PS. I do wonder a bit if we should consider a more economical way to
track this stuff. Not really sure how many bits we can realistically
expect to be set in these bitmasks...
> ---
> include/drm/drm_connector.h | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 5f8c3389d46f..17b728d9c73d 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -188,19 +188,19 @@ struct drm_hdmi_info {
>
> /**
> * @y420_vdb_modes: bitmap of modes which can support ycbcr420
> - * output only (not normal RGB/YCBCR444/422 outputs). There are total
> - * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
> - * upto 128 VICs;
> + * output only (not normal RGB/YCBCR444/422 outputs). The max VIC
> + * defined by the CEA-861-G spec is 219, so the size is 256 bits to map
> + * up to 256 VICs.
> */
> - unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
> + unsigned long y420_vdb_modes[BITS_TO_LONGS(256)];
>
> /**
> * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
> - * output also, along with normal HDMI outputs. There are total 107
> - * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
> - * 128 VICs;
> + * output also, along with normal HDMI outputs. The max VIC defined by
> + * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256
> + * VICs.
> */
> - unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
> + unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)];
>
> /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
> u64 y420_cmdb_map;
> --
> 2.24.0.525.g8f36a354ae-goog
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Thomas Anderson <thomasanderson@google.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.lakha@amd.com>,
Harry Wentland <hwentlan@amd.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>, Sean Pau <sean@poorly.run>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] drm/edid: Increase size of VDB and CMDB bitmaps to 256 bits
Date: Wed, 11 Dec 2019 17:40:37 +0200 [thread overview]
Message-ID: <20191211154037.GI1208@intel.com> (raw)
In-Reply-To: <20191210221048.83628-1-thomasanderson@google.com>
On Tue, Dec 10, 2019 at 02:10:48PM -0800, Thomas Anderson wrote:
> CEA-861-G adds modes up to 219, so increase the size of the
> maps in preparation for adding the new modes to drm_edid.c.
>
> Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Thanks. lgtm. Pushed to drm-misc-next.
PS. I do wonder a bit if we should consider a more economical way to
track this stuff. Not really sure how many bits we can realistically
expect to be set in these bitmasks...
> ---
> include/drm/drm_connector.h | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 5f8c3389d46f..17b728d9c73d 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -188,19 +188,19 @@ struct drm_hdmi_info {
>
> /**
> * @y420_vdb_modes: bitmap of modes which can support ycbcr420
> - * output only (not normal RGB/YCBCR444/422 outputs). There are total
> - * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
> - * upto 128 VICs;
> + * output only (not normal RGB/YCBCR444/422 outputs). The max VIC
> + * defined by the CEA-861-G spec is 219, so the size is 256 bits to map
> + * up to 256 VICs.
> */
> - unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
> + unsigned long y420_vdb_modes[BITS_TO_LONGS(256)];
>
> /**
> * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
> - * output also, along with normal HDMI outputs. There are total 107
> - * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
> - * 128 VICs;
> + * output also, along with normal HDMI outputs. The max VIC defined by
> + * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256
> + * VICs.
> */
> - unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
> + unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)];
>
> /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
> u64 y420_cmdb_map;
> --
> 2.24.0.525.g8f36a354ae-goog
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2019-12-11 15:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 22:10 [PATCH] drm/edid: Increase size of VDB and CMDB bitmaps to 256 bits Thomas Anderson
2019-12-10 22:10 ` Thomas Anderson
2019-12-11 15:40 ` Ville Syrjälä [this message]
2019-12-11 15:40 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211154037.GI1208@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=Bhawanpreet.lakha@amd.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=hwentlan@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sean@poorly.run \
--cc=thomasanderson@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.