* [alsa-devel] [PATCH 0/2] Add the broadmobi BM818 @ 2019-12-02 17:48 ` Angus Ainslie (Purism) 0 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Mark Rutland, Kate Stewart, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism), Takashi Iwai, Rob Herring, Liam Girdwood, Mark Brown, Thomas Gleixner, Enrico Weigelt, Allison Randal The broadmobi uses slightly different parameters from the option modems so add the paramters and document them. Angus Ainslie (Purism) (2): sound: codecs: gtm601: add Broadmobi bm818 sound profile ASoC: gtm601: add the broadmobi interface .../devicetree/bindings/sound/gtm601.txt | 10 +++++-- sound/soc/codecs/gtm601.c | 29 +++++++++++++++++-- 2 files changed, 35 insertions(+), 4 deletions(-) -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] Add the broadmobi BM818 @ 2019-12-02 17:48 ` Angus Ainslie (Purism) 0 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Liam Girdwood, Mark Brown, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism) The broadmobi uses slightly different parameters from the option modems so add the paramters and document them. Angus Ainslie (Purism) (2): sound: codecs: gtm601: add Broadmobi bm818 sound profile ASoC: gtm601: add the broadmobi interface .../devicetree/bindings/sound/gtm601.txt | 10 +++++-- sound/soc/codecs/gtm601.c | 29 +++++++++++++++++-- 2 files changed, 35 insertions(+), 4 deletions(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [alsa-devel] [PATCH 1/2] sound: codecs: gtm601: add Broadmobi bm818 sound profile 2019-12-02 17:48 ` Angus Ainslie (Purism) @ 2019-12-02 17:48 ` Angus Ainslie (Purism) -1 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Mark Rutland, Kate Stewart, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism), Takashi Iwai, Rob Herring, Liam Girdwood, Mark Brown, Thomas Gleixner, Enrico Weigelt, Allison Randal The Broadmobi bm818 uses stereo sound at 48Khz sample rate Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- sound/soc/codecs/gtm601.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/gtm601.c b/sound/soc/codecs/gtm601.c index d454294c8d06..302569bc46ff 100644 --- a/sound/soc/codecs/gtm601.c +++ b/sound/soc/codecs/gtm601.c @@ -37,7 +37,7 @@ static struct snd_soc_dai_driver gtm601_dai = { .channels_max = 1, .rates = SNDRV_PCM_RATE_8000, .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, + }, .capture = { .stream_name = "Capture", .channels_min = 1, @@ -47,6 +47,24 @@ static struct snd_soc_dai_driver gtm601_dai = { }, }; +static struct snd_soc_dai_driver bm818_dai = { + .name = "bm818", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}; + static const struct snd_soc_component_driver soc_component_dev_gtm601 = { .dapm_widgets = gtm601_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(gtm601_dapm_widgets), @@ -60,13 +78,20 @@ static const struct snd_soc_component_driver soc_component_dev_gtm601 = { static int gtm601_platform_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct snd_soc_dai_driver *dai_driver = >m601_dai; + + if (np && of_device_is_compatible(np, "broadmobi,bm818")) + dai_driver = &bm818_dai; + return devm_snd_soc_register_component(&pdev->dev, - &soc_component_dev_gtm601, >m601_dai, 1); + &soc_component_dev_gtm601, dai_driver, 1); } #if defined(CONFIG_OF) static const struct of_device_id gtm601_codec_of_match[] = { { .compatible = "option,gtm601", }, + { .compatible = "broadmobi,bm818", }, {}, }; MODULE_DEVICE_TABLE(of, gtm601_codec_of_match); -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] sound: codecs: gtm601: add Broadmobi bm818 sound profile @ 2019-12-02 17:48 ` Angus Ainslie (Purism) 0 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Liam Girdwood, Mark Brown, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism) The Broadmobi bm818 uses stereo sound at 48Khz sample rate Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- sound/soc/codecs/gtm601.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/gtm601.c b/sound/soc/codecs/gtm601.c index d454294c8d06..302569bc46ff 100644 --- a/sound/soc/codecs/gtm601.c +++ b/sound/soc/codecs/gtm601.c @@ -37,7 +37,7 @@ static struct snd_soc_dai_driver gtm601_dai = { .channels_max = 1, .rates = SNDRV_PCM_RATE_8000, .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, + }, .capture = { .stream_name = "Capture", .channels_min = 1, @@ -47,6 +47,24 @@ static struct snd_soc_dai_driver gtm601_dai = { }, }; +static struct snd_soc_dai_driver bm818_dai = { + .name = "bm818", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}; + static const struct snd_soc_component_driver soc_component_dev_gtm601 = { .dapm_widgets = gtm601_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(gtm601_dapm_widgets), @@ -60,13 +78,20 @@ static const struct snd_soc_component_driver soc_component_dev_gtm601 = { static int gtm601_platform_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct snd_soc_dai_driver *dai_driver = >m601_dai; + + if (np && of_device_is_compatible(np, "broadmobi,bm818")) + dai_driver = &bm818_dai; + return devm_snd_soc_register_component(&pdev->dev, - &soc_component_dev_gtm601, >m601_dai, 1); + &soc_component_dev_gtm601, dai_driver, 1); } #if defined(CONFIG_OF) static const struct of_device_id gtm601_codec_of_match[] = { { .compatible = "option,gtm601", }, + { .compatible = "broadmobi,bm818", }, {}, }; MODULE_DEVICE_TABLE(of, gtm601_codec_of_match); -- 2.17.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [alsa-devel] [PATCH 1/2] sound: codecs: gtm601: add Broadmobi bm818 sound profile 2019-12-02 17:48 ` Angus Ainslie (Purism) @ 2019-12-03 14:32 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2019-12-03 14:32 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: Mark Rutland, Kate Stewart, alsa-devel, kernel, Liam Girdwood, linux-kernel, Takashi Iwai, devicetree, Rob Herring, Thomas Gleixner, Enrico Weigelt, Allison Randal [-- Attachment #1.1: Type: text/plain, Size: 564 bytes --] On Mon, Dec 02, 2019 at 10:48:30AM -0700, Angus Ainslie (Purism) wrote: > + if (np && of_device_is_compatible(np, "broadmobi,bm818")) > + dai_driver = &bm818_dai; Rather than having a tree of these it'd be better if... > #if defined(CONFIG_OF) > static const struct of_device_id gtm601_codec_of_match[] = { > { .compatible = "option,gtm601", }, > + { .compatible = "broadmobi,bm818", }, > {}, > }; ...this used the data you can provide along with the of_match as the dai_driver so the probe function doesn't have to know about the individual variants. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] [-- Attachment #2: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 1/2] sound: codecs: gtm601: add Broadmobi bm818 sound profile @ 2019-12-03 14:32 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2019-12-03 14:32 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: kernel, Liam Girdwood, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel [-- Attachment #1: Type: text/plain, Size: 564 bytes --] On Mon, Dec 02, 2019 at 10:48:30AM -0700, Angus Ainslie (Purism) wrote: > + if (np && of_device_is_compatible(np, "broadmobi,bm818")) > + dai_driver = &bm818_dai; Rather than having a tree of these it'd be better if... > #if defined(CONFIG_OF) > static const struct of_device_id gtm601_codec_of_match[] = { > { .compatible = "option,gtm601", }, > + { .compatible = "broadmobi,bm818", }, > {}, > }; ...this used the data you can provide along with the of_match as the dai_driver so the probe function doesn't have to know about the individual variants. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* [alsa-devel] [PATCH 2/2] ASoC: gtm601: add the broadmobi interface 2019-12-02 17:48 ` Angus Ainslie (Purism) @ 2019-12-02 17:48 ` Angus Ainslie (Purism) -1 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Mark Rutland, Kate Stewart, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism), Takashi Iwai, Rob Herring, Liam Girdwood, Mark Brown, Thomas Gleixner, Enrico Weigelt, Allison Randal The Broadmobi BM818 uses a different sample rate and channels from the option modem. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- Documentation/devicetree/bindings/sound/gtm601.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/gtm601.txt b/Documentation/devicetree/bindings/sound/gtm601.txt index 5efc8c068de0..efa32a486c4a 100644 --- a/Documentation/devicetree/bindings/sound/gtm601.txt +++ b/Documentation/devicetree/bindings/sound/gtm601.txt @@ -1,10 +1,16 @@ GTM601 UMTS modem audio interface CODEC -This device has no configuration interface. Sample rate is fixed - 8kHz. +This device has no configuration interface. The sample rate and channels are +based on the compatible string + "option,gtm601" = 8kHz mono + "broadmobi,bm818" = 48KHz stereo Required properties: - - compatible : "option,gtm601" + - compatible : one of + "option,gtm601" + "broadmobi,bm818" + Example: -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ASoC: gtm601: add the broadmobi interface @ 2019-12-02 17:48 ` Angus Ainslie (Purism) 0 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie (Purism) @ 2019-12-02 17:48 UTC (permalink / raw) To: kernel Cc: Liam Girdwood, Mark Brown, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism) The Broadmobi BM818 uses a different sample rate and channels from the option modem. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- Documentation/devicetree/bindings/sound/gtm601.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/gtm601.txt b/Documentation/devicetree/bindings/sound/gtm601.txt index 5efc8c068de0..efa32a486c4a 100644 --- a/Documentation/devicetree/bindings/sound/gtm601.txt +++ b/Documentation/devicetree/bindings/sound/gtm601.txt @@ -1,10 +1,16 @@ GTM601 UMTS modem audio interface CODEC -This device has no configuration interface. Sample rate is fixed - 8kHz. +This device has no configuration interface. The sample rate and channels are +based on the compatible string + "option,gtm601" = 8kHz mono + "broadmobi,bm818" = 48KHz stereo Required properties: - - compatible : "option,gtm601" + - compatible : one of + "option,gtm601" + "broadmobi,bm818" + Example: -- 2.17.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [alsa-devel] [PATCH 2/2] ASoC: gtm601: add the broadmobi interface 2019-12-02 17:48 ` Angus Ainslie (Purism) @ 2019-12-13 23:30 ` Rob Herring -1 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2019-12-13 23:30 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: Mark Rutland, Kate Stewart, alsa-devel, kernel, Liam Girdwood, linux-kernel, Angus Ainslie (Purism), Takashi Iwai, devicetree, Mark Brown, Thomas Gleixner, Enrico Weigelt, Allison Randal On Mon, 2 Dec 2019 10:48:31 -0700, "Angus Ainslie (Purism)" wrote: > The Broadmobi BM818 uses a different sample rate and channels from the > option modem. > > Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> > --- > Documentation/devicetree/bindings/sound/gtm601.txt | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org> _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] ASoC: gtm601: add the broadmobi interface @ 2019-12-13 23:30 ` Rob Herring 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2019-12-13 23:30 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: kernel, Liam Girdwood, Mark Brown, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel, Angus Ainslie (Purism) On Mon, 2 Dec 2019 10:48:31 -0700, "Angus Ainslie (Purism)" wrote: > The Broadmobi BM818 uses a different sample rate and channels from the > option modem. > > Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> > --- > Documentation/devicetree/bindings/sound/gtm601.txt | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [alsa-devel] [PATCH 0/2] Add the broadmobi BM818 2019-12-02 17:48 ` Angus Ainslie (Purism) @ 2019-12-03 14:27 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2019-12-03 14:27 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: Mark Rutland, Kate Stewart, alsa-devel, kernel, Liam Girdwood, linux-kernel, Takashi Iwai, devicetree, Rob Herring, Thomas Gleixner, Enrico Weigelt, Allison Randal [-- Attachment #1.1: Type: text/plain, Size: 603 bytes --] On Mon, Dec 02, 2019 at 10:48:29AM -0700, Angus Ainslie (Purism) wrote: > sound: codecs: gtm601: add Broadmobi bm818 sound profile > ASoC: gtm601: add the broadmobi interface These subject styles don't even agree with each other :( - please try to be consistent with the style for the subsystem (the latter one matches, the first one doesn't). Please also try to think about your CC lists when sending patches, try to understand why everyone you're sending them to is getting a copy - kernel maintainers get a lot of mail and sending not obviously relevant patches to random people adds to that. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] [-- Attachment #2: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/2] Add the broadmobi BM818 @ 2019-12-03 14:27 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2019-12-03 14:27 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: kernel, Liam Girdwood, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel [-- Attachment #1: Type: text/plain, Size: 603 bytes --] On Mon, Dec 02, 2019 at 10:48:29AM -0700, Angus Ainslie (Purism) wrote: > sound: codecs: gtm601: add Broadmobi bm818 sound profile > ASoC: gtm601: add the broadmobi interface These subject styles don't even agree with each other :( - please try to be consistent with the style for the subsystem (the latter one matches, the first one doesn't). Please also try to think about your CC lists when sending patches, try to understand why everyone you're sending them to is getting a copy - kernel maintainers get a lot of mail and sending not obviously relevant patches to random people adds to that. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [alsa-devel] [PATCH 0/2] Add the broadmobi BM818 2019-12-03 14:27 ` Mark Brown @ 2019-12-03 14:34 ` Angus Ainslie -1 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie @ 2019-12-03 14:34 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: Mark Rutland, Kate Stewart, alsa-devel, kernel, Liam Girdwood, linux-kernel, Takashi Iwai, devicetree, Rob Herring, Thomas Gleixner, Enrico Weigelt, Allison Randal Hi Mark, On 2019-12-03 07:27, Mark Brown wrote: > On Mon, Dec 02, 2019 at 10:48:29AM -0700, Angus Ainslie (Purism) wrote: > >> sound: codecs: gtm601: add Broadmobi bm818 sound profile >> ASoC: gtm601: add the broadmobi interface > > These subject styles don't even agree with each other :( - please > try to be consistent with the style for the subsystem (the latter > one matches, the first one doesn't). > Ok I'll fix that. I pulled those out of previous commit messages of those files. > Please also try to think about your CC lists when sending > patches, try to understand why everyone you're sending them to is > getting a copy - kernel maintainers get a lot of mail and sending > not obviously relevant patches to random people adds to that. I used the output of ./scripts/get_maintainer.pl . Is that not the correct way to generate the CC list ? Thanks Angus _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/2] Add the broadmobi BM818 @ 2019-12-03 14:34 ` Angus Ainslie 0 siblings, 0 replies; 14+ messages in thread From: Angus Ainslie @ 2019-12-03 14:34 UTC (permalink / raw) To: Angus Ainslie (Purism) Cc: kernel, Liam Girdwood, Rob Herring, Mark Rutland, Jaroslav Kysela, Takashi Iwai, Thomas Gleixner, Allison Randal, Kate Stewart, Enrico Weigelt, alsa-devel, devicetree, linux-kernel Hi Mark, On 2019-12-03 07:27, Mark Brown wrote: > On Mon, Dec 02, 2019 at 10:48:29AM -0700, Angus Ainslie (Purism) wrote: > >> sound: codecs: gtm601: add Broadmobi bm818 sound profile >> ASoC: gtm601: add the broadmobi interface > > These subject styles don't even agree with each other :( - please > try to be consistent with the style for the subsystem (the latter > one matches, the first one doesn't). > Ok I'll fix that. I pulled those out of previous commit messages of those files. > Please also try to think about your CC lists when sending > patches, try to understand why everyone you're sending them to is > getting a copy - kernel maintainers get a lot of mail and sending > not obviously relevant patches to random people adds to that. I used the output of ./scripts/get_maintainer.pl . Is that not the correct way to generate the CC list ? Thanks Angus ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-12-13 23:31 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-12-02 17:48 [alsa-devel] [PATCH 0/2] Add the broadmobi BM818 Angus Ainslie (Purism) 2019-12-02 17:48 ` Angus Ainslie (Purism) 2019-12-02 17:48 ` [alsa-devel] [PATCH 1/2] sound: codecs: gtm601: add Broadmobi bm818 sound profile Angus Ainslie (Purism) 2019-12-02 17:48 ` Angus Ainslie (Purism) 2019-12-03 14:32 ` [alsa-devel] " Mark Brown 2019-12-03 14:32 ` Mark Brown 2019-12-02 17:48 ` [alsa-devel] [PATCH 2/2] ASoC: gtm601: add the broadmobi interface Angus Ainslie (Purism) 2019-12-02 17:48 ` Angus Ainslie (Purism) 2019-12-13 23:30 ` [alsa-devel] " Rob Herring 2019-12-13 23:30 ` Rob Herring 2019-12-03 14:27 ` [alsa-devel] [PATCH 0/2] Add the broadmobi BM818 Mark Brown 2019-12-03 14:27 ` Mark Brown 2019-12-03 14:34 ` [alsa-devel] " Angus Ainslie 2019-12-03 14:34 ` Angus Ainslie
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.