[PATCH] ath10k: Per-chain rssi should sum the secondary channels

From: greearb@candelatech.com
To: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Cc: Ben Greear <greearb@candelatech.com>
Subject: [PATCH] ath10k:  Per-chain rssi should sum the secondary channels
Date: Mon, 16 Dec 2019 14:07:47 -0800	[thread overview]
Message-ID: <20191216220747.887-1-greearb@candelatech.com> (raw)

From: Ben Greear <greearb@candelatech.com>

This makes per-chain RSSI be more consistent between HT20, HT40, HT80.
Instead of doing precise log math for adding dbm, I did a rough estimate,
it seems to work good enough.

Tested on ath10k-ct 9984 firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c  | 64 ++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/rx_desc.h |  3 +-
 2 files changed, 60 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 13f652b622df..034d4ace228d 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1167,6 +1167,44 @@ static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
 	return true;
 }
 
+static int ath10k_sum_sigs_2(int a, int b) {
+	int diff;
+
+	if (b == 0x80)
+		return a;
+
+	if (a >= b) {
+		diff = a - b;
+		if (diff == 0)
+			return a + 3;
+		else if (diff == 1)
+			return a + 2;
+		else if (diff == 2)
+			return a + 1;
+		return a;
+	}
+	else {
+		diff = b - a;
+		if (diff == 0)
+			return b + 3;
+		else if (diff == 1)
+			return b + 2;
+		else if (diff == 2)
+			return b + 1;
+		return b;
+	}
+}
+
+static int ath10k_sum_sigs(int p20, int e20, int e40, int e80) {
+	/* Hacky attempt at summing dbm without resorting to log(10) business */
+	if (e40 != 0x80) {
+		return ath10k_sum_sigs_2(ath10k_sum_sigs_2(p20, e20), ath10k_sum_sigs_2(e40, e80));
+	}
+	else {
+		return ath10k_sum_sigs_2(p20, e20);
+	}
+}
+
 static void ath10k_htt_rx_h_signal(struct ath10k *ar,
 				   struct ieee80211_rx_status *status,
 				   struct htt_rx_desc *rxd)
@@ -1177,18 +1215,32 @@ static void ath10k_htt_rx_h_signal(struct ath10k *ar,
 		status->chains &= ~BIT(i);
 
 		if (rxd->ppdu_start.rssi_chains[i].pri20_mhz != 0x80) {
-			status->chain_signal[i] = ATH10K_DEFAULT_NOISE_FLOOR +
-				rxd->ppdu_start.rssi_chains[i].pri20_mhz;
+			status->chain_signal[i] = ATH10K_DEFAULT_NOISE_FLOOR
+				+ ath10k_sum_sigs(rxd->ppdu_start.rssi_chains[i].pri20_mhz,
+						  rxd->ppdu_start.rssi_chains[i].ext20_mhz,
+						  rxd->ppdu_start.rssi_chains[i].ext40_mhz,
+						  rxd->ppdu_start.rssi_chains[i].ext80_mhz);
+			//ath10k_warn(ar, "rx-h-sig, chain[%i] pri20: %d ext20: %d  ext40: %d  ext80: %d\n",
+			//	    i, rxd->ppdu_start.rssi_chains[i].pri20_mhz, rxd->ppdu_start.rssi_chains[i].ext20_mhz,
+			//	    rxd->ppdu_start.rssi_chains[i].ext40_mhz, rxd->ppdu_start.rssi_chains[i].ext80_mhz);
 
 			status->chains |= BIT(i);
 		}
 	}
 
 	/* FIXME: Get real NF */
-	status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
-			 rxd->ppdu_start.rssi_comb;
-	/* ath10k_warn(ar, "rx-h-sig, signal: %d  chains: 0x%x  chain[0]: %d  chain[1]: %d  chan[2]: %d\n",
-                       status->signal, status->chains, status->chain_signal[0], status->chain_signal[1], status->chain_signal[2]); */
+	if (rxd->ppdu_start.rssi_comb_ht != 0x80) {
+		status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
+			rxd->ppdu_start.rssi_comb_ht;
+	}
+	else {
+		status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
+			rxd->ppdu_start.rssi_comb;
+	}
+
+	//ath10k_warn(ar, "rx-h-sig, signal: %d  chains: 0x%x  chain[0]: %d  chain[1]: %d  chain[2]: %d chain[3]: %d\n",
+	//	    status->signal, status->chains, status->chain_signal[0],
+	//	    status->chain_signal[1], status->chain_signal[2], status->chain_signal[3]);
 	status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index dec1582005b9..6b44677474dd 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -726,7 +726,8 @@ struct rx_ppdu_start {
 		u8 ext80_mhz;
 	} rssi_chains[4];
 	u8 rssi_comb;
-	__le16 rsvd0;
+	u8 rsvd0; /* first two bits are bandwidth, other 6 are reserved */
+	u8 rssi_comb_ht;
 	u8 info0; /* %RX_PPDU_START_INFO0_ */
 	__le32 info1; /* %RX_PPDU_START_INFO1_ */
 	__le32 info2; /* %RX_PPDU_START_INFO2_ */
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
