[PATCH 0/5] ARM: OMAP2+: a few pdata changes for ipc/reset

[PATCH 0/5] ARM: OMAP2+: a few pdata changes for ipc/reset

[Tero Kristo]

Hi Tony,

These patches fix up the existing pdata quirks for IOMMU support, and
add the missed reset pdata. Needed towards IPC.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 0/5] ARM: OMAP2+: a few pdata changes for ipc/reset

[Tero Kristo]

Hi Tony,

These patches fix up the existing pdata quirks for IOMMU support, and
add the missed reset pdata. Needed towards IPC.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/5] ARM: OMAP2+: pdata-quirks: add PRM data for reset support

[Tero Kristo]

The parent clockdomain for reset must be in force wakeup mode, otherwise
the reset may never complete. Add pdata quirks for this purpose for PRM
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ca52271de5a8..d8260e61ef92 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -23,6 +23,7 @@
 #include <linux/platform_data/ti-sysc.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/ti-prm.h>
 
 #include "clockdomain.h"
 #include "common.h"
@@ -408,6 +409,12 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void))
 	pcs_pdata.rearm = rearm;
 }
 
+static struct ti_prm_platform_data ti_prm_pdata = {
+	.clkdm_deny_idle = clkdm_deny_idle,
+	.clkdm_allow_idle = clkdm_allow_idle,
+	.clkdm_lookup = clkdm_lookup,
+};
+
 /*
  * GPIOs for TWL are initialized by the I2C bus and need custom
  * handing until DSS has device tree bindings.
@@ -510,6 +517,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),
 	{ /* sentinel */ },
 };
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 1/5] ARM: OMAP2+: pdata-quirks: add PRM data for reset support

[Tero Kristo]

The parent clockdomain for reset must be in force wakeup mode, otherwise
the reset may never complete. Add pdata quirks for this purpose for PRM
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ca52271de5a8..d8260e61ef92 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -23,6 +23,7 @@
 #include <linux/platform_data/ti-sysc.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/ti-prm.h>
 
 #include "clockdomain.h"
 #include "common.h"
@@ -408,6 +409,12 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void))
 	pcs_pdata.rearm = rearm;
 }
 
+static struct ti_prm_platform_data ti_prm_pdata = {
+	.clkdm_deny_idle = clkdm_deny_idle,
+	.clkdm_allow_idle = clkdm_allow_idle,
+	.clkdm_lookup = clkdm_lookup,
+};
+
 /*
  * GPIOs for TWL are initialized by the I2C bus and need custom
  * handing until DSS has device tree bindings.
@@ -510,6 +517,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),
 	{ /* sentinel */ },
 };
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/5] ARM: OMAP4+: remove pdata quirks for omap4+ iommus

[Tero Kristo]

IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index d8260e61ef92..88ca7f82510a 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -261,16 +261,6 @@ static void __init omap3_pandora_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-static struct iommu_platform_data omap4_iommu_pdata = {
-	.reset_name = "mmu_cache",
-	.assert_reset = omap_device_assert_hardreset,
-	.deassert_reset = omap_device_deassert_hardreset,
-	.device_enable = omap_device_enable,
-	.device_idle = omap_device_idle,
-};
-#endif
-
 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 static struct wkup_m3_platform_data wkup_m3_data = {
 	.reset_name = "wkup_m3",
@@ -495,10 +485,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
-		       &omap4_iommu_pdata),
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
-		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
 		       "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 2/5] ARM: OMAP4+: remove pdata quirks for omap4+ iommus

[Tero Kristo]

IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index d8260e61ef92..88ca7f82510a 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -261,16 +261,6 @@ static void __init omap3_pandora_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-static struct iommu_platform_data omap4_iommu_pdata = {
-	.reset_name = "mmu_cache",
-	.assert_reset = omap_device_assert_hardreset,
-	.deassert_reset = omap_device_deassert_hardreset,
-	.device_enable = omap_device_enable,
-	.device_idle = omap_device_idle,
-};
-#endif
-
 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 static struct wkup_m3_platform_data wkup_m3_data = {
 	.reset_name = "wkup_m3",
@@ -495,10 +485,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
-		       &omap4_iommu_pdata),
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
-		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
 		       "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/5] ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879

[Tero Kristo]

From: Suman Anna <s-anna@ti.com>

Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP

Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.

Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.

Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.

This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.

Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-omap2/omap-iommu.c | 43 +++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index f1a6ece8108e..78247e6f4a72 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -11,14 +11,43 @@
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include "clockdomain.h"
 #include "powerdomain.h"
 
+static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
+					     bool enable)
+{
+	static struct clockdomain *emu_clkdm;
+	static DEFINE_SPINLOCK(emu_lock);
+	static atomic_t count;
+	struct device_node *np = pdev->dev.of_node;
+
+	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
+		return;
+
+	if (!emu_clkdm) {
+		emu_clkdm = clkdm_lookup("emu_clkdm");
+		if (WARN_ON_ONCE(!emu_clkdm))
+			return;
+	}
+
+	spin_lock(&emu_lock);
+
+	if (enable && (atomic_inc_return(&count) == 1))
+		clkdm_deny_idle(emu_clkdm);
+	else if (!enable && (atomic_dec_return(&count) == 0))
+		clkdm_allow_idle(emu_clkdm);
+
+	spin_unlock(&emu_lock);
+}
+
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
 	struct omap_device *od;
 	u8 next_pwrst;
+	int ret = 0;
 
 	od = to_omap_device(pdev);
 	if (!od)
@@ -31,13 +60,21 @@ int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 	if (!pwrdm)
 		return -EINVAL;
 
-	if (request)
+	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
+		omap_iommu_dra7_emu_swsup_config(pdev, true);
+	}
 
 	if (*pwrst > PWRDM_POWER_RET)
-		return 0;
+		goto out;
 
 	next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
 
-	return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+	ret = pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+
+out:
+	if (!request)
+		omap_iommu_dra7_emu_swsup_config(pdev, false);
+
+	return ret;
 }
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 3/5] ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879

[Tero Kristo]

From: Suman Anna <s-anna@ti.com>

Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP

Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.

Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.

Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.

This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.

Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-omap2/omap-iommu.c | 43 +++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index f1a6ece8108e..78247e6f4a72 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -11,14 +11,43 @@
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include "clockdomain.h"
 #include "powerdomain.h"
 
+static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
+					     bool enable)
+{
+	static struct clockdomain *emu_clkdm;
+	static DEFINE_SPINLOCK(emu_lock);
+	static atomic_t count;
+	struct device_node *np = pdev->dev.of_node;
+
+	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
+		return;
+
+	if (!emu_clkdm) {
+		emu_clkdm = clkdm_lookup("emu_clkdm");
+		if (WARN_ON_ONCE(!emu_clkdm))
+			return;
+	}
+
+	spin_lock(&emu_lock);
+
+	if (enable && (atomic_inc_return(&count) == 1))
+		clkdm_deny_idle(emu_clkdm);
+	else if (!enable && (atomic_dec_return(&count) == 0))
+		clkdm_allow_idle(emu_clkdm);
+
+	spin_unlock(&emu_lock);
+}
+
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
 	struct omap_device *od;
 	u8 next_pwrst;
+	int ret = 0;
 
 	od = to_omap_device(pdev);
 	if (!od)
@@ -31,13 +60,21 @@ int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 	if (!pwrdm)
 		return -EINVAL;
 
-	if (request)
+	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
+		omap_iommu_dra7_emu_swsup_config(pdev, true);
+	}
 
 	if (*pwrst > PWRDM_POWER_RET)
-		return 0;
+		goto out;
 
 	next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
 
-	return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+	ret = pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+
+out:
+	if (!request)
+		omap_iommu_dra7_emu_swsup_config(pdev, false);
+
+	return ret;
 }
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/5] ARM: OMAP2+: omap-iommu.c conversion to ti-sysc

[Tero Kristo]

Convert omap2 iommu platform code to use ti-sysc instead of legacy
omap-device / hwmod interfaces.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/omap-iommu.c | 99 ++++++++++++++++++++++++++------
 1 file changed, 80 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 78247e6f4a72..54aff33e55e6 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -8,19 +8,27 @@
 
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/list.h>
 
-#include "omap_hwmod.h"
-#include "omap_device.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
 
+struct pwrdm_link {
+	struct device *dev;
+	struct powerdomain *pwrdm;
+	struct list_head node;
+};
+
+static DEFINE_SPINLOCK(iommu_lock);
+static struct clockdomain *emu_clkdm;
+static atomic_t emu_count;
+
 static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
 					     bool enable)
 {
-	static struct clockdomain *emu_clkdm;
-	static DEFINE_SPINLOCK(emu_lock);
-	static atomic_t count;
 	struct device_node *np = pdev->dev.of_node;
+	unsigned long flags;
 
 	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
 		return;
@@ -31,34 +39,87 @@ static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
 			return;
 	}
 
-	spin_lock(&emu_lock);
+	spin_lock_irqsave(&iommu_lock, flags);
 
-	if (enable && (atomic_inc_return(&count) == 1))
+	if (enable && (atomic_inc_return(&emu_count) == 1))
 		clkdm_deny_idle(emu_clkdm);
-	else if (!enable && (atomic_dec_return(&count) == 0))
+	else if (!enable && (atomic_dec_return(&emu_count) == 0))
 		clkdm_allow_idle(emu_clkdm);
 
-	spin_unlock(&emu_lock);
+	spin_unlock_irqrestore(&iommu_lock, flags);
+}
+
+static struct powerdomain *_get_pwrdm(struct device *dev)
+{
+	struct clk *clk;
+	struct clk_hw_omap *hwclk;
+	struct clockdomain *clkdm;
+	struct powerdomain *pwrdm = NULL;
+	struct pwrdm_link *entry;
+	unsigned long flags;
+	static LIST_HEAD(cache);
+
+	spin_lock_irqsave(&iommu_lock, flags);
+
+	list_for_each_entry(entry, &cache, node) {
+		if (entry->dev == dev) {
+			pwrdm = entry->pwrdm;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_lock, flags);
+
+	if (pwrdm)
+		return pwrdm;
+
+	clk = of_clk_get(dev->of_node->parent, 0);
+	if (!clk) {
+		dev_err(dev, "no fck found\n");
+		return NULL;
+	}
+
+	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	clk_put(clk);
+	if (!hwclk || !hwclk->clkdm_name) {
+		dev_err(dev, "no hwclk data\n");
+		return NULL;
+	}
+
+	clkdm = clkdm_lookup(hwclk->clkdm_name);
+	if (!clkdm) {
+		dev_err(dev, "clkdm not found: %s\n", hwclk->clkdm_name);
+		return NULL;
+	}
+
+	pwrdm = clkdm_get_pwrdm(clkdm);
+	if (!pwrdm) {
+		dev_err(dev, "pwrdm not found: %s\n", clkdm->name);
+		return NULL;
+	}
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		entry->dev = dev;
+		entry->pwrdm = pwrdm;
+		spin_lock_irqsave(&iommu_lock, flags);
+		list_add(&entry->node, &cache);
+		spin_unlock_irqrestore(&iommu_lock, flags);
+	}
+
+	return pwrdm;
 }
 
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
-	struct omap_device *od;
 	u8 next_pwrst;
 	int ret = 0;
 
-	od = to_omap_device(pdev);
-	if (!od)
-		return -ENODEV;
-
-	if (od->hwmods_cnt != 1)
-		return -EINVAL;
-
-	pwrdm = omap_hwmod_get_pwrdm(od->hwmods[0]);
+	pwrdm = _get_pwrdm(&pdev->dev);
 	if (!pwrdm)
-		return -EINVAL;
+		return -ENODEV;
 
 	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 4/5] ARM: OMAP2+: omap-iommu.c conversion to ti-sysc

[Tero Kristo]

Convert omap2 iommu platform code to use ti-sysc instead of legacy
omap-device / hwmod interfaces.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/omap-iommu.c | 99 ++++++++++++++++++++++++++------
 1 file changed, 80 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 78247e6f4a72..54aff33e55e6 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -8,19 +8,27 @@
 
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/list.h>
 
-#include "omap_hwmod.h"
-#include "omap_device.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
 
+struct pwrdm_link {
+	struct device *dev;
+	struct powerdomain *pwrdm;
+	struct list_head node;
+};
+
+static DEFINE_SPINLOCK(iommu_lock);
+static struct clockdomain *emu_clkdm;
+static atomic_t emu_count;
+
 static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
 					     bool enable)
 {
-	static struct clockdomain *emu_clkdm;
-	static DEFINE_SPINLOCK(emu_lock);
-	static atomic_t count;
 	struct device_node *np = pdev->dev.of_node;
+	unsigned long flags;
 
 	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
 		return;
@@ -31,34 +39,87 @@ static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
 			return;
 	}
 
-	spin_lock(&emu_lock);
+	spin_lock_irqsave(&iommu_lock, flags);
 
-	if (enable && (atomic_inc_return(&count) == 1))
+	if (enable && (atomic_inc_return(&emu_count) == 1))
 		clkdm_deny_idle(emu_clkdm);
-	else if (!enable && (atomic_dec_return(&count) == 0))
+	else if (!enable && (atomic_dec_return(&emu_count) == 0))
 		clkdm_allow_idle(emu_clkdm);
 
-	spin_unlock(&emu_lock);
+	spin_unlock_irqrestore(&iommu_lock, flags);
+}
+
+static struct powerdomain *_get_pwrdm(struct device *dev)
+{
+	struct clk *clk;
+	struct clk_hw_omap *hwclk;
+	struct clockdomain *clkdm;
+	struct powerdomain *pwrdm = NULL;
+	struct pwrdm_link *entry;
+	unsigned long flags;
+	static LIST_HEAD(cache);
+
+	spin_lock_irqsave(&iommu_lock, flags);
+
+	list_for_each_entry(entry, &cache, node) {
+		if (entry->dev == dev) {
+			pwrdm = entry->pwrdm;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_lock, flags);
+
+	if (pwrdm)
+		return pwrdm;
+
+	clk = of_clk_get(dev->of_node->parent, 0);
+	if (!clk) {
+		dev_err(dev, "no fck found\n");
+		return NULL;
+	}
+
+	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	clk_put(clk);
+	if (!hwclk || !hwclk->clkdm_name) {
+		dev_err(dev, "no hwclk data\n");
+		return NULL;
+	}
+
+	clkdm = clkdm_lookup(hwclk->clkdm_name);
+	if (!clkdm) {
+		dev_err(dev, "clkdm not found: %s\n", hwclk->clkdm_name);
+		return NULL;
+	}
+
+	pwrdm = clkdm_get_pwrdm(clkdm);
+	if (!pwrdm) {
+		dev_err(dev, "pwrdm not found: %s\n", clkdm->name);
+		return NULL;
+	}
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		entry->dev = dev;
+		entry->pwrdm = pwrdm;
+		spin_lock_irqsave(&iommu_lock, flags);
+		list_add(&entry->node, &cache);
+		spin_unlock_irqrestore(&iommu_lock, flags);
+	}
+
+	return pwrdm;
 }
 
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
-	struct omap_device *od;
 	u8 next_pwrst;
 	int ret = 0;
 
-	od = to_omap_device(pdev);
-	if (!od)
-		return -ENODEV;
-
-	if (od->hwmods_cnt != 1)
-		return -EINVAL;
-
-	pwrdm = omap_hwmod_get_pwrdm(od->hwmods[0]);
+	pwrdm = _get_pwrdm(&pdev->dev);
 	if (!pwrdm)
-		return -EINVAL;
+		return -ENODEV;
 
 	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/5] ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 boot

[Tero Kristo]

From: Suman Anna <s-anna@ti.com>

The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").

NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
   and IPU power domain is normally programmed for OFF. The IPU1
   still fails to boot though, and an unclearable l3_noc error is
   thrown currently on 4.14 kernel without this fix. This behavior
   is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
   other affected processors on OMAP4/OMAP5/DRA7 are in domains
   that are not entering RET. IPU2 on DRA7 is in CORE power domain
   which is only programmed for ON power state. The fix can be easily
   scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
   DSP remote processors were booted and using one of the GPTimers
   5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
   errata fix for i874 implemented in commit 1cbabcb9807e ("ARM:
   DRA7: clockdomain: Implement timer workaround for errata i874")
   which keeps the IPU1 power domain from entering RET when the
   timers are active. But the timer workaround did not make any
   difference on 4.14 kernel, and an l3_noc error was seen still
   without this fix.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 88ca7f82510a..7c6e57e4bcb2 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -43,6 +43,17 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -276,6 +287,10 @@ static void __init omap5_uevm_legacy_init(void)
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
+static struct iommu_platform_data dra7_ipu1_dsp_iommu_pdata = {
+	.set_pwrdm_constraint = omap_iommu_set_pwrdm_constraint,
+};
+
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
@@ -499,6 +514,12 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &dra7_hsmmc_data_mmc2),
 	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
 		       &dra7_hsmmc_data_mmc3),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x40d01000, "40d01000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x41501000, "41501000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-iommu", 0x58882000, "58882000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
 #endif
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 5/5] ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 boot

[Tero Kristo]

From: Suman Anna <s-anna@ti.com>

The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").

NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
   and IPU power domain is normally programmed for OFF. The IPU1
   still fails to boot though, and an unclearable l3_noc error is
   thrown currently on 4.14 kernel without this fix. This behavior
   is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
   other affected processors on OMAP4/OMAP5/DRA7 are in domains
   that are not entering RET. IPU2 on DRA7 is in CORE power domain
   which is only programmed for ON power state. The fix can be easily
   scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
   DSP remote processors were booted and using one of the GPTimers
   5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
   errata fix for i874 implemented in commit 1cbabcb9807e ("ARM:
   DRA7: clockdomain: Implement timer workaround for errata i874")
   which keeps the IPU1 power domain from entering RET when the
   timers are active. But the timer workaround did not make any
   difference on 4.14 kernel, and an l3_noc error was seen still
   without this fix.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 88ca7f82510a..7c6e57e4bcb2 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -43,6 +43,17 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -276,6 +287,10 @@ static void __init omap5_uevm_legacy_init(void)
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
+static struct iommu_platform_data dra7_ipu1_dsp_iommu_pdata = {
+	.set_pwrdm_constraint = omap_iommu_set_pwrdm_constraint,
+};
+
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
@@ -499,6 +514,12 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &dra7_hsmmc_data_mmc2),
 	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
 		       &dra7_hsmmc_data_mmc3),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x40d01000, "40d01000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x41501000, "41501000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-iommu", 0x58882000, "58882000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
 #endif
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/5] ARM: OMAP2+: a few pdata changes for ipc/reset

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [191212 05:06]:
> Hi Tony,
> 
> These patches fix up the existing pdata quirks for IOMMU support, and
> add the missed reset pdata. Needed towards IPC.

Thanks applied all into omap-for-v5.6/soc.

Regards,

Tony

Re: [PATCH 0/5] ARM: OMAP2+: a few pdata changes for ipc/reset

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [191212 05:06]:
> Hi Tony,
> 
> These patches fix up the existing pdata quirks for IOMMU support, and
> add the missed reset pdata. Needed towards IPC.

Thanks applied all into omap-for-v5.6/soc.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel