Re: [PATCH v4 13/14] dt-bindings: phy: Document WIZ (SERDES wrapper) bindings

[Rob Herring <robh@kernel.org>]

On Mon, Dec 16, 2019 at 03:27:11PM +0530, Kishon Vijay Abraham I wrote:
> Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a
> PHY but a wrapper used to configure some of the input signals to the
> SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G)
>  SERDES]
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> ---
>  .../bindings/phy/ti,phy-j721e-wiz.yaml        | 204 ++++++++++++++++++
>  1 file changed, 204 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> new file mode 100644
> index 000000000000..fd4204a960a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> @@ -0,0 +1,204 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI J721E WIZ (SERDES Wrapper)
> +
> +maintainers:
> +  - Kishon Vijay Abraham I <kishon@ti.com>
> +
> +properties:
> +  compatible:
> +      enum:
> +          - ti,j721e-wiz-16g
> +          - ti,j721e-wiz-10g

Tab size is 2 spaces.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 3
> +    description: clock-specifier to represent input to the WIZ
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +      - const: core_ref_clk
> +      - const: ext_ref_clk
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 4
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  "#reset-cells":
> +    const: 1
> +
> +  ranges: true
> +
> +  assigned-clocks:
> +    maxItems: 2
> +
> +  assigned-clock-parents:
> +    maxItems: 2
> +
> +patternProperties:
> +   "^pll[0|1]-refclk$":

Indentation

> +    type: object
> +    description: |

Don't need the '|' unless there's formatting or multiple paragraphs.

> +      WIZ node should have subnodes for each of the PLLs present in
> +      the SERDES.
> +    properties:
> +      clocks:
> +        maxItems: 2
> +        description: Phandle to clock nodes representing the two inputs to PLL.
> +
> +      "#clock-cells":
> +        const: 0
> +
> +      assigned-clocks:
> +        maxItems: 1
> +
> +      assigned-clock-parents:
> +        maxItems: 1
> +
> +    required:
> +      - clocks
> +      - "#clock-cells"
> +      - assigned-clocks
> +      - assigned-clock-parents
> +
> +   "^cmn-refclk1?-dig-div$":

Indentation

> +    type: object
> +    description: |
> +      WIZ node should have subnodes for each of the PMA common refclock
> +      provided by the SERDES.
> +    properties:
> +      clocks:
> +        maxItems: 1
> +        description: Phandle to the clock node representing the input to the
> +          divider clock.
> +
> +      "#clock-cells":
> +        const: 0
> +
> +    required:
> +      - clocks
> +      - "#clock-cells"
> +
> +   "^refclk-dig$":

Indentation

> +    type: object
> +    description: |
> +      WIZ node should have subnode for refclk_dig to select the reference
> +      clock source for the reference clock used in the PHY and PMA digital
> +      logic.
> +    properties:
> +      clocks:
> +        maxItems: 4
> +        description: Phandle to four clock nodes representing the inputs to
> +          refclk_dig
> +
> +      "#clock-cells":
> +        const: 0
> +
> +      assigned-clocks:
> +        maxItems: 1
> +
> +      assigned-clock-parents:
> +        maxItems: 1
> +
> +    required:
> +      - clocks
> +      - "#clock-cells"
> +      - assigned-clocks
> +      - assigned-clock-parents
> +
> +   "^serdes@[0-9a-f]+$":

...

> +    type: object
> +    description: |
> +      WIZ node should have '1' subnode for the SERDES. It could be either
> +      Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
> +      bindings specified in
> +      Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
> +      Torrent SERDES should follow the bindings specified in
> +      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> +
> +required:
> +  - compatible
> +  - power-domains
> +  - clocks
> +  - clock-names
> +  - num-lanes
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#reset-cells"
> +  - ranges
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +    wiz@5000000 {
> +           compatible = "ti,j721e-wiz-16g";
> +           #address-cells = <1>;
> +           #size-cells = <1>;
> +           power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
> +           clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
> +           clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> +           assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
> +           assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
> +           num-lanes = <2>;
> +           #reset-cells = <1>;
> +           ranges = <0x5000000 0x0 0x5000000 0x10000>;
> +
> +           pll0-refclk {
> +                  clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
> +                  #clock-cells = <0>;
> +                  assigned-clocks = <&wiz1_pll0_refclk>;
> +                  assigned-clock-parents = <&k3_clks 293 13>;
> +           };
> +
> +           pll1-refclk {
> +                  clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
> +                  #clock-cells = <0>;
> +                  assigned-clocks = <&wiz1_pll1_refclk>;
> +                  assigned-clock-parents = <&k3_clks 293 0>;
> +           };
> +
> +           cmn-refclk-dig-div {
> +                  clocks = <&wiz1_refclk_dig>;
> +                  #clock-cells = <0>;
> +           };
> +
> +           cmn-refclk1-dig-div {
> +                  clocks = <&wiz1_pll1_refclk>;
> +                  #clock-cells = <0>;
> +           };
> +
> +           refclk-dig {
> +                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
> +                  #clock-cells = <0>;
> +                  assigned-clocks = <&wiz0_refclk_dig>;
> +                  assigned-clock-parents = <&k3_clks 292 11>;
> +           };
> +
> +           serdes@5000000 {
> +                  compatible = "cdns,ti,sierra-phy-t0";
> +                  reg-names = "serdes";
> +                  reg = <0x5000000 0x10000>;
> +                  #address-cells = <1>;
> +                  #size-cells = <0>;
> +                  resets = <&serdes_wiz0 0>;
> +                  reset-names = "sierra_reset";
> +                  clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
> +                  clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
> +           };
> +    };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel