Re: [PATCH] arm64: Add qcom Kconfig fragment

[Brian Masney <masneyb@onstation.org>]

On Fri, Dec 20, 2019 at 02:56:00PM +0100, Loic Poulain wrote:
> Add qcom Kconfig fragment which enables the appropriate symbols for
> support of Qualcomm based boards, like the 'popular' dragonboards.
> This permits to fully support the boards upstream without having to
> rely on downstream deconfig changes.
> 
> This patch has been tested with Dragonboard-410c and Dragonboard-820c.
> 
> qcom.config fragment has been generated with ./script/diffconfig
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>  arch/arm64/configs/qcom.config | 57 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 arch/arm64/configs/qcom.config
> 
> diff --git a/arch/arm64/configs/qcom.config b/arch/arm64/configs/qcom.config
> new file mode 100644
> index 0000000..9358df8
> --- /dev/null
> +++ b/arch/arm64/configs/qcom.config
> @@ -0,0 +1,57 @@
> +CONFIG_ARM_QCOM_CPUFREQ_HW=y
> +CONFIG_BT_HCIUART_3WIRE=y
> +CONFIG_BT_HCIUART_QCA=y
> +CONFIG_BT_HCIUART_RTL=y
> +CONFIG_CRYPTO_DEV_QCOM_RNG=y
> +CONFIG_EXTCON_QCOM_SPMI_MISC=y
> +CONFIG_INTERCONNECT=y
> +CONFIG_MFD_QCOM_RPM=y
> +CONFIG_PHY_QCOM_PCIE2=y
> +CONFIG_PHY_QCOM_QMP=y
> +CONFIG_PHY_QCOM_QUSB2=y
> +CONFIG_PHY_QCOM_UFS=y
> +CONFIG_PM8916_WATCHDOG=y
> +CONFIG_POWER_RESET_QCOM_PON=y
> +CONFIG_QCOM_APR=m
> +CONFIG_QCOM_FASTRPC=y
> +CONFIG_QCOM_RMTFS_MEM=m
> +CONFIG_QCOM_RPMHPD=y
> +CONFIG_QCOM_RPMPD=y
> +CONFIG_QCOM_SOCINFO=m
> +CONFIG_QCOM_WCNSS_CTRL=m
> +CONFIG_QCOM_WCNSS_PIL=m
> +CONFIG_SCSI_UFS_QCOM=y
> +CONFIG_SND_SOC_CROS_EC_CODEC=m
> +CONFIG_SND_SOC_MAX98927=m
> +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
> +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
> +CONFIG_VIDEO_QCOM_CAMSS=m
> +CONFIG_VIDEO_QCOM_VENUS=m
> +CONFIG_WCN36XX=m
> +CONFIG_BT_QCA=m
> +CONFIG_BT_QCOMSMD=m
> +CONFIG_INTERCONNECT_QCOM=y
> +CONFIG_INTERCONNECT_QCOM_MSM8974=y

msm8974 is arm32 and should be dropped.

Brian