All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>,
	Alex Williamson <alex.williamson@redhat.com>
Cc: kevin.tian@intel.com, ashok.raj@intel.com, kvm@vger.kernel.org,
	sanjay.k.kumar@intel.com, iommu@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, yi.y.sun@intel.com
Subject: [PATCH v5 8/9] iommu/vt-d: Use iova over first level
Date: Tue, 24 Dec 2019 15:45:01 +0800	[thread overview]
Message-ID: <20191224074502.5545-9-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <20191224074502.5545-1-baolu.lu@linux.intel.com>

After we make all map/unmap paths support first level page table.
Let's turn it on if hardware supports scalable mode.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel-iommu.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 34e619318f64..51d60bad0b1d 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1770,15 +1770,13 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
 
 /*
  * Check and return whether first level is used by default for
- * DMA translation. Currently, we make it off by setting
- * first_level_support = 0, and will change it to -1 after all
- * map/unmap paths support first level page table.
+ * DMA translation.
  */
 static bool first_level_by_default(void)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	static int first_level_support = 0;
+	static int first_level_support = -1;
 
 	if (likely(first_level_support != -1))
 		return first_level_support;
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>,
	Alex Williamson <alex.williamson@redhat.com>
Cc: ashok.raj@intel.com, sanjay.k.kumar@intel.com,
	jacob.jun.pan@linux.intel.com, kevin.tian@intel.com,
	yi.l.liu@intel.com, yi.y.sun@intel.com,
	Peter Xu <peterx@redhat.com>,
	iommu@lists.linux-foundation.org, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH v5 8/9] iommu/vt-d: Use iova over first level
Date: Tue, 24 Dec 2019 15:45:01 +0800	[thread overview]
Message-ID: <20191224074502.5545-9-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <20191224074502.5545-1-baolu.lu@linux.intel.com>

After we make all map/unmap paths support first level page table.
Let's turn it on if hardware supports scalable mode.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel-iommu.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 34e619318f64..51d60bad0b1d 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1770,15 +1770,13 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
 
 /*
  * Check and return whether first level is used by default for
- * DMA translation. Currently, we make it off by setting
- * first_level_support = 0, and will change it to -1 after all
- * map/unmap paths support first level page table.
+ * DMA translation.
  */
 static bool first_level_by_default(void)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	static int first_level_support = 0;
+	static int first_level_support = -1;
 
 	if (likely(first_level_support != -1))
 		return first_level_support;
-- 
2.17.1


  parent reply	other threads:[~2019-12-24  7:46 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24  7:44 [PATCH v5 0/9] Use 1st-level for IOVA translation Lu Baolu
2019-12-24  7:44 ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 1/9] iommu/vt-d: Identify domains using first level page table Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 2/9] iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 3/9] iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setup Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 4/9] iommu/vt-d: Setup pasid entries for iova over first level Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 5/9] iommu/vt-d: Flush PASID-based iotlb " Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:44 ` [PATCH v5 6/9] iommu/vt-d: Make first level IOVA canonical Lu Baolu
2019-12-24  7:44   ` Lu Baolu
2019-12-24  7:45 ` [PATCH v5 7/9] iommu/vt-d: Update first level super page capability Lu Baolu
2019-12-24  7:45   ` Lu Baolu
2019-12-24  7:45 ` Lu Baolu [this message]
2019-12-24  7:45   ` [PATCH v5 8/9] iommu/vt-d: Use iova over first level Lu Baolu
2019-12-24  7:45 ` [PATCH v5 9/9] iommu/vt-d: debugfs: Add support to show page table internals Lu Baolu
2019-12-24  7:45   ` Lu Baolu
2020-01-01 23:38 ` [PATCH v5 0/9] Use 1st-level for IOVA translation Lu Baolu
2020-01-01 23:38   ` Lu Baolu
2020-01-02  2:31   ` Liu, Yi L
2020-01-02  2:31     ` Liu, Yi L
2020-01-02  2:32     ` Lu Baolu
2020-01-02  2:32       ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224074502.5545-9-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sanjay.k.kumar@intel.com \
    --cc=yi.y.sun@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.