* [PATCH] arm: dts: apq8084: Remove all instances of IRQ_TYPE_NONE [not found] <1723137502.9510958.1577059595123.JavaMail.zimbra@ufpe.br> @ 2019-12-23 0:27 ` Victhor Foster 2019-12-29 2:51 ` Bjorn Andersson 0 siblings, 1 reply; 2+ messages in thread From: Victhor Foster @ 2019-12-23 0:27 UTC (permalink / raw) To: linux-arm-msm; +Cc: agross, robh+dt, mark rutland, devicetree This patch removes all instances of IRQ_TYPE_NONE, which fixes warning messages during boot. It also changes interrupt types to their corresponding macros, as defined in arm-gic.h. Signed-off by: Victhor Foster <victhor.foster@ufpe.br> --- arch/arm/boot/dts/qcom-apq8084.dtsi | 40 ++++++++++++++--------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0a0fb147ebb9..1724a87afc4f 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-apq8084.h> #include <dt-bindings/gpio/gpio.h> @@ -184,7 +185,7 @@ cpu_crit3: trip1 { cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -203,10 +204,10 @@ sleep_clk: sleep_clk { timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; @@ -258,7 +259,6 @@ tsens: thermal-sensor@fc4a8000 { nvmem-cell-names = "calib", "calib_backup"; #thermal-sensor-cells = <1>; }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -269,50 +269,50 @@ timer@f9020000 { frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -404,13 +404,13 @@ tlmm: pinctrl@fd510000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = <0 114 0x0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -420,7 +420,7 @@ sdhci@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -433,7 +433,7 @@ sdhci@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -449,7 +449,7 @@ spmi_bus: spmi@fc4cf000 { <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -463,7 +463,7 @@ smd { compatible = "qcom,smd"; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; -- 2.24.0 ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm: dts: apq8084: Remove all instances of IRQ_TYPE_NONE 2019-12-23 0:27 ` [PATCH] arm: dts: apq8084: Remove all instances of IRQ_TYPE_NONE Victhor Foster @ 2019-12-29 2:51 ` Bjorn Andersson 0 siblings, 0 replies; 2+ messages in thread From: Bjorn Andersson @ 2019-12-29 2:51 UTC (permalink / raw) To: Victhor Foster; +Cc: linux-arm-msm, agross, robh+dt, mark rutland, devicetree On Sun 22 Dec 16:27 PST 2019, Victhor Foster wrote: > This patch removes all instances of IRQ_TYPE_NONE, which fixes warning messages during boot. It also changes interrupt types to their corresponding macros, as defined in arm-gic.h. > > Signed-off by: Victhor Foster <victhor.foster@ufpe.br> Thanks for fixing this up Victhor. I've applied both patches, with the commit message wrapped to 72 chars. Regards, Bjorn > --- > arch/arm/boot/dts/qcom-apq8084.dtsi | 40 ++++++++++++++--------------- > 1 file changed, 20 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi > index 0a0fb147ebb9..1724a87afc4f 100644 > --- a/arch/arm/boot/dts/qcom-apq8084.dtsi > +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > /dts-v1/; > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-apq8084.h> > #include <dt-bindings/gpio/gpio.h> > > @@ -184,7 +185,7 @@ cpu_crit3: trip1 { > > cpu-pmu { > compatible = "qcom,krait-pmu"; > - interrupts = <1 7 0xf04>; > + interrupts = <GIC_PPI 7 0xf04>; > }; > > clocks { > @@ -203,10 +204,10 @@ sleep_clk: sleep_clk { > > timer { > compatible = "arm,armv7-timer"; > - interrupts = <1 2 0xf08>, > - <1 3 0xf08>, > - <1 4 0xf08>, > - <1 1 0xf08>; > + interrupts = <GIC_PPI 2 0xf08>, > + <GIC_PPI 3 0xf08>, > + <GIC_PPI 4 0xf08>, > + <GIC_PPI 1 0xf08>; > clock-frequency = <19200000>; > }; > > @@ -258,7 +259,6 @@ tsens: thermal-sensor@fc4a8000 { > nvmem-cell-names = "calib", "calib_backup"; > #thermal-sensor-cells = <1>; > }; > - > timer@f9020000 { > #address-cells = <1>; > #size-cells = <1>; > @@ -269,50 +269,50 @@ timer@f9020000 { > > frame@f9021000 { > frame-number = <0>; > - interrupts = <0 8 0x4>, > - <0 7 0x4>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9021000 0x1000>, > <0xf9022000 0x1000>; > }; > > frame@f9023000 { > frame-number = <1>; > - interrupts = <0 9 0x4>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9023000 0x1000>; > status = "disabled"; > }; > > frame@f9024000 { > frame-number = <2>; > - interrupts = <0 10 0x4>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9024000 0x1000>; > status = "disabled"; > }; > > frame@f9025000 { > frame-number = <3>; > - interrupts = <0 11 0x4>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9025000 0x1000>; > status = "disabled"; > }; > > frame@f9026000 { > frame-number = <4>; > - interrupts = <0 12 0x4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9026000 0x1000>; > status = "disabled"; > }; > > frame@f9027000 { > frame-number = <5>; > - interrupts = <0 13 0x4>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9027000 0x1000>; > status = "disabled"; > }; > > frame@f9028000 { > frame-number = <6>; > - interrupts = <0 14 0x4>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > reg = <0xf9028000 0x1000>; > status = "disabled"; > }; > @@ -404,13 +404,13 @@ tlmm: pinctrl@fd510000 { > #gpio-cells = <2>; > interrupt-controller; > #interrupt-cells = <2>; > - interrupts = <0 208 0>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > }; > > blsp2_uart2: serial@f995e000 { > compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > reg = <0xf995e000 0x1000>; > - interrupts = <0 114 0x0>; > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; > clock-names = "core", "iface"; > status = "disabled"; > @@ -420,7 +420,7 @@ sdhci@f9824900 { > compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; > reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; > reg-names = "hc_mem", "core_mem"; > - interrupts = <0 123 0>, <0 138 0>; > + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hc_irq", "pwr_irq"; > clocks = <&gcc GCC_SDCC1_APPS_CLK>, > <&gcc GCC_SDCC1_AHB_CLK>, > @@ -433,7 +433,7 @@ sdhci@f98a4900 { > compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; > reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; > reg-names = "hc_mem", "core_mem"; > - interrupts = <0 125 0>, <0 221 0>; > + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hc_irq", "pwr_irq"; > clocks = <&gcc GCC_SDCC2_APPS_CLK>, > <&gcc GCC_SDCC2_AHB_CLK>, > @@ -449,7 +449,7 @@ spmi_bus: spmi@fc4cf000 { > <0xfc4cb000 0x1000>, > <0xfc4ca000 0x1000>; > interrupt-names = "periph_irq"; > - interrupts = <0 190 0>; > + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; > qcom,ee = <0>; > qcom,channel = <0>; > #address-cells = <2>; > @@ -463,7 +463,7 @@ smd { > compatible = "qcom,smd"; > > rpm { > - interrupts = <0 168 1>; > + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; > qcom,ipc = <&apcs 8 0>; > qcom,smd-edge = <15>; > > -- > 2.24.0 ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-29 2:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1723137502.9510958.1577059595123.JavaMail.zimbra@ufpe.br>
2019-12-23 0:27 ` [PATCH] arm: dts: apq8084: Remove all instances of IRQ_TYPE_NONE Victhor Foster
2019-12-29 2:51 ` Bjorn Andersson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.