All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Jacopo Mondi <jacopo@jmondi.org>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-amarula@amarulasolutions.com,
	linux-arm-kernel@lists.infradead.org,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
Date: Mon, 30 Dec 2019 17:30:20 +0530	[thread overview]
Message-ID: <20191230120021.32630-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191230120021.32630-1-jagan@amarulasolutions.com>

From: Michael Trimarchi <michael@amarulasolutions.com>

Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch.

 arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-amarula@amarulasolutions.com,
	Jacopo Mondi <jacopo@jmondi.org>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
Date: Mon, 30 Dec 2019 17:30:20 +0530	[thread overview]
Message-ID: <20191230120021.32630-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191230120021.32630-1-jagan@amarulasolutions.com>

From: Michael Trimarchi <michael@amarulasolutions.com>

Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch.

 arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };
-- 
2.18.0.321.gffc6fa0e3


  reply	other threads:[~2019-12-30 12:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-30 12:00 [PATCH v2 1/3] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL Jagan Teki
2019-12-30 12:00 ` Jagan Teki
2019-12-30 12:00 ` Jagan Teki [this message]
2019-12-30 12:00   ` [PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods Jagan Teki
2020-01-06 17:12   ` Jacopo Mondi
2020-01-06 17:12     ` Jacopo Mondi
2019-12-30 12:00 ` [PATCH v2 3/3] ARM: dts: imx6qdl-icore: Add fec phy-handle Jagan Teki
2019-12-30 12:00   ` Jagan Teki
2020-01-06 16:49 ` [PATCH v2 1/3] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL Jacopo Mondi
2020-01-06 16:49   ` Jacopo Mondi
2020-01-09  7:46 ` Shawn Guo
2020-01-09  7:46   ` Shawn Guo
2020-01-21  5:22   ` Naresh Kamboju
2020-01-21  5:22     ` Naresh Kamboju
2020-01-21 23:07     ` Daniel Díaz
2020-01-22  6:42       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191230120021.32630-2-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=jacopo@jmondi.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michael@amarulasolutions.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.