From: JC Kuo <jckuo@nvidia.com>
To: gregkh@linuxfoundation.org, thierry.reding@gmail.com,
robh@kernel.org, jonathanh@nvidia.com, kishon@ti.com
Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
nkristam@nvidia.com, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v5 5/5] arm64: tegra: Enable XUSB host in P2972-0000 board
Date: Fri, 3 Jan 2020 16:18:14 +0800 [thread overview]
Message-ID: <20200103081814.9848-6-jckuo@nvidia.com> (raw)
In-Reply-To: <20200103081814.9848-1-jckuo@nvidia.com>
This commit enables XUSB host and pad controller in Tegra194
P2972-0000 board.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v5: none
Changes in v4: none
Changes in v3: none
Changes in v2:
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 63 +++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b02..014e18b2d52a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -67,6 +67,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -230,7 +253,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -313,5 +336,16 @@
gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 353a6a22196d..2cbcae39d1b0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -37,6 +37,69 @@
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ nvidia,disable-gen2;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
+
pwm@c340000 {
status = "okay";
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v5 5/5] arm64: tegra: Enable XUSB host in P2972-0000 board
Date: Fri, 3 Jan 2020 16:18:14 +0800 [thread overview]
Message-ID: <20200103081814.9848-6-jckuo@nvidia.com> (raw)
In-Reply-To: <20200103081814.9848-1-jckuo@nvidia.com>
This commit enables XUSB host and pad controller in Tegra194
P2972-0000 board.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v5: none
Changes in v4: none
Changes in v3: none
Changes in v2:
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 63 +++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b02..014e18b2d52a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -67,6 +67,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -230,7 +253,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -313,5 +336,16 @@
gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 353a6a22196d..2cbcae39d1b0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -37,6 +37,69 @@
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ nvidia,disable-gen2;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
+
pwm@c340000 {
status = "okay";
};
--
2.17.1
next prev parent reply other threads:[~2020-01-03 8:18 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 8:18 [PATCH v5 0/5] add Tegra194 XUSB host and pad controller support JC Kuo
2020-01-03 8:18 ` JC Kuo
2020-01-03 8:18 ` [PATCH v5 1/5] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2020-01-03 8:18 ` JC Kuo
2020-01-03 8:18 ` [PATCH v5 2/5] phy: tegra: xusb: Add Tegra194 support JC Kuo
2020-01-03 8:18 ` JC Kuo
2020-01-03 8:18 ` [PATCH v5 3/5] dt-bindings: phy: tegra: " JC Kuo
2020-01-03 8:18 ` JC Kuo
2020-01-03 22:39 ` Rob Herring
2020-01-06 7:10 ` JC Kuo
2020-01-06 7:10 ` JC Kuo
2020-01-09 1:31 ` JC Kuo
[not found] ` <4c3f3776-65e2-aafd-7bb9-fa69df301cb6-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-01-10 11:26 ` Thierry Reding
2020-01-10 11:26 ` Thierry Reding
2020-01-13 2:15 ` JC Kuo
2020-01-13 2:15 ` JC Kuo
2020-01-03 8:18 ` [PATCH v5 4/5] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2020-01-03 8:18 ` JC Kuo
2020-01-03 8:18 ` JC Kuo [this message]
2020-01-03 8:18 ` [PATCH v5 5/5] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103081814.9848-6-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.