From: Sam Ravnborg <sam@ravnborg.org>
To: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Rob Clark <robdclark@chromium.org>,
Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] drm/panel: Add support for AUO B116XAK01 panel
Date: Fri, 3 Jan 2020 20:31:35 +0100 [thread overview]
Message-ID: <20200103193135.GA21515@ravnborg.org> (raw)
In-Reply-To: <20200103183025.569201-2-robdclark@gmail.com>
Hi Rob.
On Fri, Jan 03, 2020 at 10:30:24AM -0800, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..895a25cfc54f 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -680,6 +680,35 @@ static const struct panel_desc auo_b116xw03 = {
> },
> };
>
> +static const struct drm_display_mode auo_b116xak01_mode = {
> + .clock = 69300,
> + .hdisplay = 1366,
> + .hsync_start = 1366 + 48,
> + .hsync_end = 1366 + 48 + 32,
> + .htotal = 1366 + 48 + 32 + 10,
> + .vdisplay = 768,
> + .vsync_start = 768 + 4,
> + .vsync_end = 768 + 4 + 6,
> + .vtotal = 768 + 4 + 6 + 15,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +};
> +
> +static const struct panel_desc auo_b116xak01 = {
> + .modes = &auo_b116xak01_mode,
> + .num_modes = 1,
> + .bpc = 6,
> + .size = {
> + .width = 256,
> + .height = 144,
> + },
> + .delay = {
> + .hpd_absent_delay = 200,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
Entries in alphabetical order - check.
.connector_type specified - check.
.flags and .bus_format specified - check.
.bus_flags not specified but optional - OK.
> +
> static const struct drm_display_mode auo_b133xtn01_mode = {
> .clock = 69500,
> .hdisplay = 1366,
> @@ -3125,6 +3154,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "auo,b133htn01",
> .data = &auo_b133htn01,
> + }, {
> + .compatible = "auo,b116xa01",
> + .data = &auo_b116xak01,
This entry most also be in alphabetical order.
> }, {
> .compatible = "auo,b133xtn01",
> .data = &auo_b133xtn01,
Please fix and resend.
I am in general holding back on patches to panel-simple.
I hope we can reach a decision for the way forward with the bindings
files sometimes next week.
Sam
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Rob Clark <robdclark@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>,
David Airlie <airlied@linux.ie>,
linux-arm-msm@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
dri-devel@lists.freedesktop.org,
open list <linux-kernel@vger.kernel.org>,
Thierry Reding <thierry.reding@gmail.com>
Subject: Re: [PATCH 2/2] drm/panel: Add support for AUO B116XAK01 panel
Date: Fri, 3 Jan 2020 20:31:35 +0100 [thread overview]
Message-ID: <20200103193135.GA21515@ravnborg.org> (raw)
In-Reply-To: <20200103183025.569201-2-robdclark@gmail.com>
Hi Rob.
On Fri, Jan 03, 2020 at 10:30:24AM -0800, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..895a25cfc54f 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -680,6 +680,35 @@ static const struct panel_desc auo_b116xw03 = {
> },
> };
>
> +static const struct drm_display_mode auo_b116xak01_mode = {
> + .clock = 69300,
> + .hdisplay = 1366,
> + .hsync_start = 1366 + 48,
> + .hsync_end = 1366 + 48 + 32,
> + .htotal = 1366 + 48 + 32 + 10,
> + .vdisplay = 768,
> + .vsync_start = 768 + 4,
> + .vsync_end = 768 + 4 + 6,
> + .vtotal = 768 + 4 + 6 + 15,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +};
> +
> +static const struct panel_desc auo_b116xak01 = {
> + .modes = &auo_b116xak01_mode,
> + .num_modes = 1,
> + .bpc = 6,
> + .size = {
> + .width = 256,
> + .height = 144,
> + },
> + .delay = {
> + .hpd_absent_delay = 200,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
Entries in alphabetical order - check.
.connector_type specified - check.
.flags and .bus_format specified - check.
.bus_flags not specified but optional - OK.
> +
> static const struct drm_display_mode auo_b133xtn01_mode = {
> .clock = 69500,
> .hdisplay = 1366,
> @@ -3125,6 +3154,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "auo,b133htn01",
> .data = &auo_b133htn01,
> + }, {
> + .compatible = "auo,b116xa01",
> + .data = &auo_b116xak01,
This entry most also be in alphabetical order.
> }, {
> .compatible = "auo,b133xtn01",
> .data = &auo_b133xtn01,
Please fix and resend.
I am in general holding back on patches to panel-simple.
I hope we can reach a decision for the way forward with the bindings
files sometimes next week.
Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-01-03 19:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 18:30 [PATCH 1/2] dt-bindings: display: panel: Add AUO B116XAK01 panel bindings Rob Clark
2020-01-03 18:30 ` Rob Clark
2020-01-03 18:30 ` [PATCH 2/2] drm/panel: Add support for AUO B116XAK01 panel Rob Clark
2020-01-03 18:30 ` Rob Clark
2020-01-03 19:31 ` Sam Ravnborg [this message]
2020-01-03 19:31 ` Sam Ravnborg
2020-01-03 19:47 ` Rob Clark
2020-01-03 19:47 ` Rob Clark
2020-01-03 19:54 ` Sam Ravnborg
2020-01-03 19:54 ` Sam Ravnborg
2020-01-03 19:58 ` Rob Clark
2020-01-03 19:58 ` Rob Clark
2020-01-03 19:35 ` [PATCH 1/2] dt-bindings: display: panel: Add AUO B116XAK01 panel bindings Sam Ravnborg
2020-01-03 19:35 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103193135.GA21515@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@chromium.org \
--cc=robdclark@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.